Sylvania T5 PSN DATASHEET
www.sylvania.com
QUICKTRONIC®PROStart®T5
Universal Voltage
Professional Series
Lamp / Ballast Guide
28W T5 - PENTRON
1-lamp QTP1x28T5/UNV PSN or
QTP2x28T5/UNV PSN*
2-lamp QTP2x28T5/UNV PSN
Primary Lamp Type:
FP28
Also operates:
FP14, FP21, FP35
*Two lamp model can be wired for
one lamp operation.
®
Key System Features
• Universal voltage (120-277V)
T5 PSN
• Low-profile (0.87" High)
• QUICKSENSE®ballast technology
(end-of-lamp-life sensing)
• PROStart programmed rapid start
• UL type CC rated
• 0°F (-18°C) Starting
• Operates at >40 kHz to reduce
potential interference with infrared
control systems
• High power factor
• Low harmonic distortion
• Lightweight
• UL, CSA, FCC
Application Information
SYLVANIA QUICKTRONIC PS
is ideally suited for:
• Commercial
• Retail
• Hospitality
• Institutional
• New construction
• Direct lighting
• Indirect lighting
• Surface mount
• Cove lighting
56
SYLVANIA QUICKTRONIC PS operates
PENTRON T5 lamps with full lumen output
and optimal system performance.
SYSTEM PS ballasts contain QUICKSENSE
ballast technology, a patented circuitry
designed to shut down the system reliably
and safely when lamps reach end-of-life.
Setting the standard for quality, SYSTEM
PS is also covered by our QUICK 60+
warranty, the first and most comprehensive system warranty in the industry.
SYSTEM PS is available as a two lamp
model which can be wired for one lamp
operation to cover a wide range of
applications.
System Information
System PS operates from 120V through
277V, 50 or 60Hz, eliminating “wrong
voltage” wiring errors and reducing the
number of models in inventory by half.
PROStart ballasts provide optimum starting
conditions to provide up to 100,000
switching cycles for use on occupancy
sensors and building control systems.
QUICKSENSE ballast technology helps to
protect against overheated bases and
sockets, as well as cracking of the glass
wall, and uses dynamic end-of-lamp-life
sensing to avoid false shutdowns caused
by some static sensing methods. QUICKSENSE ballast technology will auto reset
when the end-of-life lamps are replaced
with new ones.
The two lamp unit can be wired for one
lamp operation, allowing for an additional
50% reduction in inventory model numbers.
<10% THD Electronic T5 Fluorescent
Programmed Rapid Start Systems
Normal Ballast Factor
®
System Type Power System Efficacy
(2-lamp) (W) Lumens LPW
F40T12 - Standard Magnetic 96 5795 60
Energy Saver Magnetic 86 5795 67
F34T12 - Energy Saver Magnetic 72 4750 66
QT2x32IS - FO32/800 59 5310 90
QTP2x28T5/UNV PSN - FP28/800 65/63 5800 89/92
SYSTEM PS comes in a 0.87"H x 1.18"W
profile, and PENTRON lamps are designed
to provide peak performance at 35°C
fixture ambient, allowing for smaller and
more innovative fixtures.
A complete OSRAM SYLVANIA System
Performance Guide showing performance
characteristics of lamps and ballasts is
available upon request.
Input Initial System
SPECIFICATION DATA
Width
Mounting
Length
Length
Height
BALLAST
1 LAMP
LAMP
White
Black
Red
Blue
2 LAMP
LAMP
LAMP
Blue
Yellow
Red
BALLAST
Black
White
Catalog # Date Type
Project Prepared by
Comments
Normal Ballast Factor
T5 PROStart
®
UNV
Professional Series
Universal Voltage (120-277V)
Input Rated
1
Item Current Lamp1Lumens No. of Factor System1Mean1Power Efficacy
Number Description (AMPS) Type (lm) Lamps (BF) Lumens Lumens (Watts) (lm/W) BEF
49181 QTP 2x28T5/UNV PSN 0.55/0.23 FP28T5 2900 2 1.00 5800 5395 65/63 89/92 1.59
(49180)*
1 1.00 2900 2695 32 90 3.13
49171 QTP 1x28T5/UNV PSN 0.28/0.12 FP28T5 2900 1 1.00 2900 2695 32 90 3.13
(49170)*
1: At 35°C lamp ambient temperature.
2: Ballast Efficiency Factor (BEF) shown = (Ballast Factor X 100) divided by Input Power (Note: calculation based on lowest wattage value).
*(Item Number) = Item Number/NAED in parentheses are models with leads/wires. Ballast with leads/wires contains 10 pieces each. Ballast without leads contain 20 pieces each
Dimensions:
1 & 2 lamp model enclosure size:
Overall: 14.17"L x 1.18"W x 0.87"H (360mm L x 30mm W x 22mm H)
Mounting: 13.74" (349mm)
Wiring:
Push-in connectors
Use 18AWG solid copper wire only
Ballast
1
Input1System
Performance Guide
Data based upon SYLVANIA PENTRON
lamps shown. QUICKTRONIC®PS
ballasts are also compatible with other
2
lamp manufacturers equivalent lamp
types that meet ANSI specifications.
Specifications
Starting Method: Programmed
Rapid Start
Ballast Factor: 1.00
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.6
Starting Temp: 0°F (-18°C) min.
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of Rated Input
UL Listed Class P, Type 1, Outdoor,
UL Rated Type CC
CSA Certified
70°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
Dynamic End-of-Lamp-Life Sensing
Remote Mounting (Max. wire length
from ballast case to lampholder):
up to 18 feet
3 Data based on PENTRON 28W lamp
types for primary ballast application.
See the Sylvania QUICKTRONIC
Electronic Ballast Technology and
Specification Guide (ECS-ELECTRONIC)
for other PENTRON combinations.
4 Operation below 50°F (10°C) may affect
light output or lamp operation – see
“Low Temp. Starting” definition. Remote
red leads up to 18 feet. Keep blue leads
<10 feet.
4
®
3
4
T5 PSN
®
Product Weight:
1L: 0.68 lbs (0.31kg) each (approx)
2L: 0.88 lbs (0.40kg) each (approx)
Item Number 49181 QTP 2 x 28 T5/UNV PSN
QUICKTRONIC PROFESSIONAL
Number of Lamps (1, 2)
Specifications subject to change without notice.
Starting/Ballast Factor
Line Voltage (120-277V)
Primary Lamp Wattage
System Life / Warranty
QUICKTRONIC products are covered
by our QUICK 60+®warranty, a
comprehensive lamp and ballast
system warranty. For additional
details, refer to our QUICK 60+
warranty bulletin.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
57
Loading...