Sylvania T5HO PSN HT DATASHEET
www.sylvania.com
QUICKTRONIC®PROStart®T5HO
Universal High Ambient Temp.
Professional Series
Lamp / Ballast Guide
54W T5 - PENTRON®HO
1 or 2 lamp
QTP2x54T5HO/UNV PSN HT
QTP4x54T5HO/UNV PSN HT W
3 or 4 lamp
QTP4x54T5HO/UNV PSN HT W
Also operates:
FT50DL, FT55DL, FPC55, L58
Four lamp switchable model can be
wired for four, three, two or one lamp
operation.
Two lamp fixed output model can be
wired for one lamp operation.
Key System Features
• 90°C maximum case temp.
• Universal voltage (120-277V)
• Low-profile (1.00" High)
• 100% Ballast factor
T5HO PSN HT
• QUICKSENSE ballast technology
(end-of-lamp-life sensing)
• PROStart programmed rapid start
• UL type CC rated
• -20°F (-29C) Min. Starting Temp.
• Operates at >40 kHz to reduce
potential interference with infrared
control systems
• High power factor
• Low harmonic distortion
• Lightweight
• UL, CSA, FCC
Application Information
SYLVANIA QUICKTRONIC PHO HT
is ideally suited for:
• Industrial high-bay
• Commercial
• Retail
• Hospitality
• Institutional
• New construction
• Direct lighting
• Indirect lighting
• Surface mount
• Cove lighting
64
SYLVANIA QUICKTRONIC HIGH
AMBIENT (HT) PHO operates
PENTRON HO, PENTRON HO Circline,
and DULUX®L T5 lamps with full
lumen output and optimal system
performance.
SYSTEM PHO High Ambient
Temperature ballasts are specifically
designed for applications where the
ballast is subjected to higher ambient
temperatures, as in high bay industrial installations. The four lamp UNV
(120-277V) ballast system provides
18,600 mean lumens, which, when
factoring in lumen maintenance and
typical T5HO fixture efficiency, can be
considered as a direct replacement
for standard 400W MH. As such, the
family is ideally suited to replace
250W and 400W metal halide installations.
Unique to the family is the 120-277V
4-lamp “switching” ballast, designed to
switch from 4- to 2-, 3- to 2-, 3- to 1- or
2- to 1-lamps. The switching feature can
be accessed through a second input power
System Information
System PHO HT operates on 120V
through 277V, 50 or 60Hz current, eliminating “wrong voltage” wiring errors and
reducing the number of ballast models in
inventory by half.
PROStart ballasts provide optimum starting
conditions and provide up to 100,000
switching cycles for use on occupancy
sensors and building control systems.
QUICKSENSE ballast technology helps to
protect against overheated bases and
sockets, as well as cracking of the lamp
glass wall, and uses dynamic end-oflamp-life sensing to avoid false
shutdowns caused by some static
sensing methods. QUICKSENSE ballast
technology will auto reset when spent
lamps are replaced with new ones.
<10% THD Electronic T5HO Fluorescent
Programmed Rapid Start Ballasts
Normal Ballast Factor
terminal. This feature allows for a range of
control interfaces, including an occupancy
sensor, mounted inside a fixture.
SYSTEM PHO HT ballasts contain QUICK-
®
SENSE
ballast technology, a patented
circuitry designed to shut down the
system reliably and safely when lamps
reach end-of-life.
System Type (W) Lumens LPW
F40T12 - E.S. Magnetic Ballast (4-lamp) 172 11590 67
F34T12 - E.S. Magnetic Ballast (4-lamp) 144 9500 66
FO32T8/XP - QT4x32IS (4-lamp) 114 10800 95
FP54T5HO - QTP2x54T5HO/UNV PSN HT (2-lamp) 121 10000 83
FP54T5HO - QTP4x54T5HO/UNV PSN HTW (4-lamp) 241 20000 83
The four lamp unit can be wired for four,
three, two or one lamp operation. The
two lamp unit can be wired for one lamp
operation, allowing for an additional 50%
reduction in inventory model numbers.
SYSTEM PHO HT has a 25.4H (mm)
profile. PENTRON T5 lamps are designed
to provide peak performance at 35°C
fixture ambient, allowing for smaller and
more innovative fixtures.
Setting the standard for quality, SYSTEM
PHO HT is also covered by our QUICK 60+
warranty, the first and most compre-
hensive system warranty in the industry.
SYSTEM PHO HT is available in four and
two lamp models to cover a wide range
of applications.
Input Initial System
Power System Efficacy
HT
®
SPECIFICATION DATA
Catalog # Date Type
Project Prepared by
Comments
High Ambient Temp.
T5HO PROStart
Professional Series
®
High Ambient Universal Voltage (120-277V)
Item Current Lamp
Number Description (AMPS) Type (lm) Lamps (BF) Lumens Lumens (Watts) (lm/W) BEF
QTP 2x54 T5HO Fixed Output BF 1.0
49136 QTP 2x54T5HO/UNV PSN HT 1.00/0.43 FP54T5HO 5000 2 1.00 10000 9300 121/118 83/85 0.85
(49135)*
QTP 4x54 T5HO Switchable Model
49161 QTP 4x54T5HO/UNV PSN HTW 2.00/0.85 FP54T5HO 5000 4 1.00 20000 18,600 241/236 83/85 0.42
(49160)**
1: At 35°C lamp ambient temperature.
2: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
*(49135) QTP 2x54T5HO/UNV PSN HT: same as 49136, with leads.
**(49160) QTP 4x54T5HO/UNV PSN HTW: same as 49161, with leads.
Installation Notes
Input Rated
Switching: Simultaneously disconnect all ungrounded line conductors.
Install in accordance with National & Local Electric Code. Ground ballast case.
1
1
Lumens No. of Factor System1Mean1Power Efficacy
1 1.00 5000 4650 61 82 1.64
3 1.00 15000 13,950 182/178 83/85 0.56
2 1.00 10000 9300 121/118 83/85 0.85
1 1.00 5000 4650 61 82 1.64
Dimensions:
Model QTP2x54 T5HO/UNV PSN HT enclosure size:
Overall: 16.73"L x 1.18"W x 1.0"H (425mm L x 30mm W x 25.4mm H)
Mounting: 16.34" (415mm)
Wiring:
Push-in connectors
Use 18AWG solid copper wire only
See page 66 for wiring diagram.
Packaging:
Quantity: 20 (2-lamp)
Weight: 2L: 0.88 lbs each (approx)
30.0 mm
1.18”
Width
Dimensions:
Model QTP4x54 T5HO/UNV PSN HT W enclosure size:
Overall: 16.73"L x 2.32"W x 1.0"H (425mm L x 59mm W x 25.4mm H)
Mounting: 16.34" (415mm)
Wiring:
Push-in connectors
Use 18AWG solid copper wire only
See page 67 for wiring diagram.
Packaging:
Quantity: 2-Lamp: 20 (no leads)
10 (with leads)
4-Lamp: 10 (leaded and non-leaded)
59.0 mm
2.32”
Width
Weight: 2L: 0.88 lbs, 0.40kg each (approx)
4L: 1.68 lbs, 0.76kg each (approx)
Item Number 49161 QTP 4 x 54 T5HO / UNV PSN HTW
QUICKTRONIC PROFESSIONAL
Number of Lamps
Specifications subject to change without notice.
Ballast
1
414.0 mm
16.3”
Mounting Length
Input1System
25.4 mm
1.0”
Height
425.0 mm
16.73”
Length
414.0 mm
16.3”
Mounting Length
425.0 mm
16.73”
Length
High Ambient Temperature (Case)
Starting/Ballast Factor
Line Voltage (120-277V)
Primary Lamp Wattage
25.4 mm
1.0”
Height
Performance Guide
Data based upon SYLVANIA
®
PENTRON
QUICKTRONIC
2
also compatible with other lamp
HO lamps shown.
®
PHO HT ballasts are
manufacturers equivalent lamp
types that meet ANSI specifications.
Specifications
Starting Method: Programmed
Rapid Start
Ballast Factor: 1.00
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.6
Starting Temp: -20°F (-29°C) min.
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
rated line (108-305V)
UL Listed Class P, Type 1, Outdoor,
UL Type CC Rated
CSA Certified
High Ambient Applications:
90°C Max. Case Temp. (3 yr. warranty)
Standard Ambient Applications:
70°C Max. Case Temp. (5 yr. warranty)
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
Dynamic End-of-Lamp-Life Sensing
Remote Mounting (Max. wire length
from ballast case to lampholder):
up to 18 feet
3 Data based on PENTRON HO lamp types
for primary ballast application.
4 Operation below 50°F (10°C) may affect
light output or lamp operation – see “Low
Temp. Starting” definition. Remote red and
brown leads up to 18 feet. Keep blue and
yellow (for 4-lamp model only) leads <10 ft.
4
System Life / Warranty
QUICKTRONIC®products are covered
by our QUICK 60+®warranty, a
comprehensive lamp and ballast
system warranty. For additional
details, refer to our QUICK 60+
warranty bulletin.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
3
4
T5HO PSN HT
65
Loading...