Sylvania T5HO DALI DATASHEET
www.sylvania.com
QUICKTRONIC®DALI
T5HO Dimming
Professional Series
Lamp/Ballast Guide
54W T5HO - PENTRON
1-lamp QTP1x54T5HO/DALI
2-lamp QTP2x54T5HO/DALI
Operates FP54HO Lamp Types
Key System Features
• Digital Addressable Control
• Individual control of fixtures
• Up to 16 groups
• Up to 16 scenes
• 100-1% dimming
• Programmable fade rates
• 1.0 ballast factor at full power
• Universal Input Voltage (120/277V)
T5HO DALI
• Programmed rapid start
• End-Of-Lamp-Life Sensing
• QUICK 60+®lamp and ballast
warranty
• Anti-flash circuitry – turns on at
previous light level
• Operates >40kHz to reduce potential
IR interference
• Control may be wired for Class 1 or
Class 2 applications
• Wiretrap connectors
• UL, cUL, FCC
Application Information
SYLVANIA QUICKTRONIC
DALI Dimming is ideally suited for:
• All size offices
• Daylight harvesting
• Energy management
• Load shedding
• A/V presentations
• Conference rooms
• Occupancy sensors
• Creative lighting designs
For optimal dimming performance,
fluorescent lamps may require
seasoning up to 100 hours prior to
dimming to the lowest light levels.
®
SYLVANIA QUICKTRONIC DALI Dimming
combines digital control technology with
full-range continuous dimming to provide a
new level of lighting system performance.
This allows for greater flexibility and
control of the lighting environment than
can be achieved with traditional 0-10VDC
dimming systems. The communications
protocol is “DALI”, an acronym for “Digital
Addressable Lighting Interface”. This is a
worldwide standard for digital lighting
control that has been accepted by all
the leading lighting suppliers.
SYSTEM PHO-DALI controls
PENTRON HO T5 lamps over a
wide (100 - 1%) range of light
level settings, from 1.0 ballast
factor to .01 ballast factor.
Control wiring is simplified by two
polarity-free connections that can
be routed in the same raceway as
power wires.
System Information
Programmed rapid start ballasts provide
optimum starting conditions to provide
up to 100,000 switching cycles for use
on occupancy sensor and building
control system applications.
Individual addressability allows the user
to dim any particular fixture or groups
of fixtures at one time. Simple controller
programming steps allow for:
1. Fade rates, dim levels, time of day,
groups and scenes to be customized.
2. Flexibility in grouping fixtures;
no need to re-wire fixtures when
groups need to be changed.
3. Systems are scalable and can be
expanded anytime user needs
change, without the need for costly
re-wiring. Additional fixtures are
added to groupings simply by means
of software.
When used in conjunction with appropriate controls, feedback can be
obtained on operating conditions, such
as operating hours, light-level or failed
lamps. This lamp fault-reporting feature
can save significant cost by quickly
Electronic T5HO Fluorescent
Digital Dimming Systems
SYSTEM PHO-DALI is
available in one and two
lamp models that operate at 120V or 277V
input line voltage, eliminating “wrong
voltage” wiring errors and reducing the
number of models in inventory by half.
$ SAVINGS PER YEAR* vs LIGHT LEVEL
$45.00
$40.00
$35.00
$30.00
$25.00
$20.00
$ SAVINGS Per Year
$15.00
$10.00
$5.00
$0.00
identifying the location, especially in large
facilities or in applications where lamps
are concealed by lenses.
SYSTEM PHO-DALI lighting systems can
also be integrated with Building
Management Systems (BMS) by installing
(54W T5HO Lamps, QUICKTRONIC DALI T5HO Ballasts)
$44.40
$20.80
1 Lamp Fixture
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Setting the standard for quality, SYSTEM
PHO-DALI is also covered by our QUICK
®
warranty, the first and most compre-
60+
hensive system warranty in the industry.
2 Lamp Fixture
Light Level
*Based on 4,000 burn hrs/yr & $0.10/kWh
gateways that translate between the DALI
and BMS systems. Specification of DALI
compatible gateways, controls and
ballasts ensure flawless operation of the
lighting system.
96
SPECIFICATION DATA
QTP1x54T5HO/UNV DALI
LAMP
Green
White
Black
Purple
Purple
DALI
DIMMING
BALLAST
1
2
3
4
Red
Red
Blue
Blue
DALI Control Leads (non-polarized)
Class 1 or Class 2 Circuit
G
N
L
LAMP 2
LAMP 1
QTP2x54T5HO/UNV DALI
DALI
DIMMING
BALLAST
1
2
3
4
5
6
Red
Red
Yel lo w
Yel lo w
Blue
Blue
Green
White
Black
Purple
Purple
DALI Control Leads (non-polarized)
Class 1 or Class 2 Circuit
G
N
L
Catalog # Date Type
Project Prepared by
Comments
T5HO DALI
Professional Series
Electronic DALI T5HO Fluorescent Controllable Lighting Systems
Input Input Rated Ballast Input System
Item Voltage Current Lamp Lumens No. of Factor System Power Efficacy
Number Description (VAC) (AMPS) Type (lm) Lamps (BF) Lumens (Watts) (lm/W) BEF
51364 QTP 1x54T5HO/UNV DALI 120/277 0.52/0.22 FP54HO 5000 1 1.00 5000 63/62 79/81 1.61
0.01 50 13
51366 QTP 2x54T5HO/UNV DALI 120/277 1.05/0.44 FP54HO 5000 2 1.00 10,000 117/115 85/87 0.87
0.01 100 22/24
1: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Wattage (Note: calculation based on lowest input wattage).
Wiring Diagrams:
Wiring: Push-in (wiretrap) connections
Use 18 AWG solid copper wire only
Performance Guide
Data shown based upon SYLVANIA
®
PENTRON
TRONIC®DALI ballasts are also
1
FP54HO lamps. QUICK-
compatible with other manufacturers
equivalent lamp types that meet ANSI
specifications.
Specifications
Starting Method: Programmed
Rapid-Start
Circuit Type: Series
Lamp Frequency: >40kHz
Lamp CCF: <1.7
Starting Temp: 50°F (10°C) min.
Input Frequency: 50/60 Hz
THD: <10% @ full output
Power Factor: >98% @ full output
Voltage Range: ±10% of 120/277
rated voltage
UL Listed Class P, Indoor
cUL Certified
Temperature Test Point (Tc) on
ballast label: 70°C max.
All other points on ballast: 75°C max.
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
No Remote or Tandem Wiring
T5HO DALI
Packaging:
Quantity: 25 pieces
Weight: 1.2 lbs each (approx.)
Dimensions:
Units L ML W H
inches 18.05 17.70 1.18 1.18
mm 458.5 449.6 30.0 30.0
Item Number 51366 QTP 2 x 54T5HO / UNV DALI
QUICKTRONIC PROFESSIONAL
Number of Lamps
Specifications subject to change without notice.
Height
Width
Length
Mounting
Length
System Type - DALI
Line Voltage (120/277V)
Primary Lamp Type (F54T5HO)
Control Information
QUICKTRONIC DALI ballasts are
compatible with DALI digital
controllers available from various
manufacturers. For a list of DALI
control manufacturers, please contact
OSRAM SYLVANIA.
Refer to pages 100 & 101
for controls information.
Control Specifications:
Two wire non-polarized control.
May be wired as Class 1 or Class 2
circuit, consult Local and National
Electrical Codes.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
97
Loading...