Sylvania T5 DALI DATASHEET
www.sylvania.com
QUICKTRONIC®DALI
T5 Dimming
Professional Series
Lamp/Ballast Guide
28W T5 - PENTRON
1-lamp QTP1x28T5/DALI
2-lamp QTP2x28T5/DALI
14W T5 - PENTRON
1-lamp QTP1x14T5/DALI
2-lamp QTP2x14T5/DALI
35W T5 - PENTRON
1-lamp QTP1x35T5/DALI
2-lamp QTP2x35T5/DALI
Key System Features
• Digital Addressable Control
• Individual control of fixtures
• Up to 16 groups
• Up to 16 scenes
T5 DALI
• 100-1% dimming
• Programmable fade rates
• 1.0 ballast factor at full power
• Universal Input Voltage (120/277V)
• Programmed rapid start
• End-Of-Lamp-Life Sensing
• QUICK 60+®lamp and ballast
warranty
• Anti-flash circuitry - turns on at
previous light level
• Operates >40kHz to reduce potential
IR interference
• Control may be wired for Class 1 or
Class 2 applications
• Wiretrap connectors
• UL, cUL, FCC
Application Information
SYLVANIA QUICKTRONIC
DALI Dimming is ideally suited for:
• All size offices
• Daylight harvesting
• Energy management
• Load shedding
• A/V presentations
• Conference rooms
• Occupancy sensors
• Creative lighting designs
For optimal dimming performance,
fluorescent lamps may require
seasoning up to 100 hours prior to
dimming to the lowest light levels.
®
®
®
SYLVANIA QUICKTRONIC DALI Dimming
combines digital control technology with
full-range continuous dimming to provide
a new level of lighting system perfor-
mance. This allows for greater flexibility
and control of the lighting environment
than can be achieved with traditional
0-10VDC dimming systems. The commu-
nications protocol is “DALI”, an acronym
for “Digital Addressable Lighting
Interface”. This is a worldwide standard
for digital lighting control that has
been accepted by all the leading
lighting suppliers.
SYSTEM PS-DALI controls
PENTRON T5 lamps over a wide
(100 - 1%) range of light level
settings, from 1.0 ballast factor
to .01 ballast factor. Control
wiring is simplified by two
polarity-free connections that can
be routed in the same raceway as
power wires.
System Information
Programmed rapid start ballasts provide
optimum starting conditions to provide
up to 100,000 switching cycles for use
on occupancy sensor and building
control system applications.
Individual addressability allows the user
to dim any particular fixture or groups
of fixtures at one time. Simple controller
programming steps allow for:
1. Fade rates, dim levels, time of day,
groups and scenes to be customized.
2. Flexibility in grouping fixtures; no
need to re-wire fixtures when groups
need to be changed.
3. Systems are scalable and can be
expanded anytime user needs
change, without the need for costly
re-wiring. Additional fixtures are
added to groupings simply by means
of software.
Electronic T5 Fluorescent
Digital Dimming Systems
SYSTEM PS-DALI
is available in one and
two lamp models that operate
at 120V or 277V input line voltage, elimi-
nating “wrong voltage” wiring errors and
reducing the number of models in
inventory by half.
$ SAVINGS PER YEAR* vs LIGHT LEVEL
$25.00
$20.00
$20.00
$15.00
$10.40
$10.00
$ SAVINGS Per Year
$5.00
$0.00
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
When used in conjunction with appropriate controls, feedback can be obtained
on operating conditions, such as operating
hours, light-level or failed lamps. This
lamp fault-reporting feature can save
significant cost by quickly identifying the
location, especially in large facilities or in
applications where lamps are concealed
by lenses.
(28W T5 Lamps, QUICKTRONIC DALI T5 Ballasts)
1 Lamp Fixture
Setting the standard for quality, SYSTEM
PS-DALI is also covered by our QUICK
®
warranty, the first and most compre-
60+
hensive system warranty in the industry.
2 Lamp Fixture
Light Level
*Based on 4,000 burn hrs/yr & $0.10/kWh
SYSTEM PS-DALI lighting systems can
also be integrated with Building
Management Systems (BMS) by installing
gateways that translate between the DALI
and BMS systems. Specification of DALI
compatible gateways, controls and
ballasts ensure flawless operation of the
lighting system.
94
SPECIFICATION DATA
LAMP
Green
White
Black
Purple
Purple
DALI
DIMMING
BALLAST
1
2
3
4
Red
Red
Blue
Blue
DALI Control Leads (non-polarized)
Class 1 or Class 2 Circuit
G
N
L
LAMP 2
LAMP 1
QTP2x28T5/UNV DALI
DALI
DIMMING
BALLAST
1
2
3
4
5
6
Red
Red
Yellow
Yellow
Blue
Blue
Green
White
Black
Purple
Purple
DALI Control Leads (non-polarized)
Class 1 or Class 2 Circuit
G
N
L
Width
Height
Mounting
Length
Length
Catalog # Date Type
Project Prepared by
Comments
T5 DALI
Professional Series
Electronic DALI T5 Fluorescent Controllable Lighting Systems
Input Input Rated Ballast Input System
Item Voltage Current Lamp Lumens No. of Factor System Power Efficacy
Number Description (VAC) (AMPS) Type (lm) Lamps (BF) Lumens (Watts) (lm/W) BEF
51356 QTP 1x28T5/UNV DALI 120/277 0.27/0.11 FP28 2900 1 1.00 2900 33 88 3.03
0.01 29 7
51358 QTP 2x28T5/UNV DALI 120/277 0.55/0.23 FP28 2900 2 1.00 5800 64/62 91/94 1.61
0.01 58 12
51357 QTP 1x14T5/UNV DALI 120/277 0.15/0.07 FP14 1350 1 1.00 1350 19 71 5.26
0.01 14 6
51359 QTP 2x14T5/UNV DALI 120/277 0.29/0.13 FP14 1350 2 1.00 2700 35 77 2.86
0.01 27 10
51360 QTP 1x35T5/UNV DALI 120/277 0.34/0.14 FP35 3650 1 1.00 3650 40/39 91/94 2.56
0.01 37 8
51361 QTP 2x35T5/UNV DALI 120/277 0.67/0.28 FP35 3650 2 1.00 7300 79/76 92/96 1.32
0.01 73 3
1: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Wiring Diagrams:
Wiring: Push-in (wiretrap) connections (no leads provided)
Use 18 AWG solid copper wire only
1 Lamp
Performance Guide
Data shown based upon SYLVANIA
®
PENTRON
TRONIC®DALI ballasts are also
1
lamps shown. QUICK-
compatible with other manufacturers
equivalent lamp types that meet
ANSI specifications.
Specifications
Starting Method: Programmed
Rapid-Start
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: <1.7
Starting Temp: 50°F (10°C) min.
Input Frequency: 50/60 Hz
THD: <10% @ full output
Power Factor: >98% @ full output
Voltage Range: ±10% of 120/277
rated voltage
UL Listed Class P, Indoor
cUL Certified
Temp. Test Point (Tc) on ballast label:
1 lamp model: 70°C max
2 lamp model: 75°C max.
All other points on ballast: 75°C max.
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
No Remote or Tandem Wiring
T5 DALI
Packaging:
Quantity: 25 pieces
Weight: 1.2 lbs each (approx.)
Dimensions:
Units L ML W H
inches 18.05 17.70 1.18 1.18
mm 458.5 449.6 30.0 30.0
Specifications subject to change without notice.
Item Number 51358 QTP 2 x 28T5 / UNV DALI
QUICKTRONIC PROFESSIONAL
Number of Lamps
Control Information
2 Lamp
System Type - DALI
Line Voltage (120-277V)
Primary Lamp Type (F28T5)
QUICKTRONIC DALI ballasts are
compatible with DALI digital
controllers available from various
manufacturers. For a list of DALI
control manufacturers, please contact
OSRAM SYLVANIA.
Refer to pages 100 & 101 for
controls information.
Control Specifications:
Two wire non-polarized control.
May be wired as Class 1 or Class 2
circuit, consult Local and National
Electrical Codes.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
95
Loading...