Sylvania SRCD858 User Manual

SRCD858

MWMW

INSTRUCTION MANUAL

WARNINGS

TO Pr eve nt f ir e or shock hazard, do not use this plug with an e xt ension cord, rec eptacle or add other
outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock
hazard, do not expose this appliance to rain or moisture.

WARNING

The lightning flash with arro­whead symbol,within an equ­ilateral triangle is intented to
alert the user to the presence
of uninsulated' dangerous vo-

ltage' wi thi n the pro d uc t's en­closure that may be of suffici­ent magnitude to constitute a
risk of electric shock to perso­ns.

CAUTION : TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (
OR BACK),NO USER SERV­ICEABLE PARTS INSIDE R­EFER SER VICING TO QUA­LIFIED SERVICE PERSON­NEL

The exclamation point within
an equilateral triangle is int­ended to alert the user to the
pres ence of important opera­ting and maintenanc e (servi-
cing) instructions in the liter­ature accompany-in g the ap­plicance

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instruction.
2 keep these instructions.
3 heed all warnings.
4 Follow all instructions.
5 Do not use this product near water(swimming pool, beach, lake etc.).
6 Clean only with a dry cl ot h.
7 Do not block any of the ventilation openings.Install in accordance with the manufacturer's instructions .
8 Do not install near any heat sources such as radiators, heat registers . Stoves or other apparatus
(including amplifiers ) that produce heat.
9 Do not defe at the safet y purpose o f the polarized or groun ding-type plug, A pola r ized plug ha s t wo
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or th e t hi r d pr ong is provided for your safety. If the p r ovided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Pro tect the power cord from being walked on or pinched particularly at receptacles and t he point
wher e they exi t fr om t he stereo.
11 Only use attachments/accessories specified by the man ufacturer.
12 Unpl ug this app ar at us during lig htning sto r m s or w hen unused for long pe r iods of time
13 Refe r al l ser v i cing to quali fi ed service personne l. Servicing is req u i r ed when the system has be e n
damaged in any way, such as a damaged power-supply cord or plug . Has been exposed to rain or
moisture ,does not operate normally , or has been dropped.
14 This appliance should not be exposed to dripping water or splashing water and objects filled with
water, such as vases, should not be placed on this unit

- 1 -

IMPORTANT NOTES

• Avoid installing this unit in places
exposed to direct sunlight or close to heat
radiating appliances such as electric
heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
places subject to constant vibration and/
or humid or moist areas.

• Do not attempt to clean this unit with
chemical solvents as this might
damage the finish. Use a clean dry cloth.

• Operate controls and switches as
described in the manual.

• Before turning ‘On’ the power, make
certain that power cord is properly
installed.

• Store your CDs, in a cool area to avoid
damage from heat.

• When moving the set, be sure to first
disconnect the power cord.

CLASS 1 LASER PRODUCT

CAUTION

CLASS 1 LASER PRODUCT

APPAREIL Á LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

This product contains a low power Laser Device.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference

that may cause undesired operation.

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED.

AVOID EXPOSURE TO BEAM

- 2 -

UNPACKING AND SET-UP

• Carefully remove the unit from the carton and remove all packing material from the
unit.

• Remove any labels or stickers which may be on the front or top of the set, but do not
remove any labels from the back or bottom.

• We suggest that you retain the original carton and packing materials in case it ever
becomes necessary to return your unit for service. This is the only sure way to
protect the unit from damage in transit.

• Remove any small strips of tape that may have been used to prevent the CD door
from opening in transit.

• Unwind the lead wire FM antenna on the back of the unit and extend it to its full
length.

• The unit is shipped with a dummy CD display card in the CD player. This dummy CD
card must be removed before you can use the CD player.

SPEAKER CONNECTION

Connect each speaker to the corresponding speaker jack on the back panel of the main
unit. Make sure that the left speaker plug is connected to the left (L)speaker jack and the
right speaker plug is connected to the right (R) speaker jack.

POWER SOURCE

This system is designed to operate on 120V 60Hz AC house current. Connecting this
system to any other power supply could result in damage to the unit which is not covered
by your warranty. You will note that this system is equipped with a polarized AC power
plug having one blade wider than the other. This is a safety feature. If this plug does not fit
into your existing AC outlet, do not try to defeat this safety feature by filing the wide blade
to make it fit into your outlet. If this plug will not fit into your outlet, you probably have an
out-dated non- polarized AC outlet. You should have your outlet changed by a qualified
licensed electrician.

AC OPERATION

1.) Unwind the AC Power Cord completely.

2.) Insert the plug into any convenient

120V 60Hz AC outlet.

AC
Plug

- 3 -

AC
Outlet

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving
when you operate the controls. These ‘feet’ are made from non-migrating rubber material
specially formulated to avoid leaving any marks or stains on your furniture. However
certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may
cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.
To prevent any damage to your furniture we strongly recommend that you purchase small
self-adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place
the product on fine wooden furniture.

- 4 -

LOCATION OF CONTROLS

20

22

19

21

18

1
2

17

3

4

5

6

7
8

16

15

14
13

10

11

9

12

- 5 -