S TE RE O MICRO HI-FI S YS TE M
M O D E L N O . : SR-748
INSTRUCTION MANUAL
MAIN UNIT SPEAKER & SUBWOOFER
UK - 1
UK - 2
To achieve the utmost in enjoyment and performance, please read this man ual careful ly before
attempting to operate the unit in order to became familiar with its features, and assure you years of
faithful, trouble free performance and listening pleasure.
Important Notes
* Keep instructions the safety and operating instructions should be retained for future reference.
* Avoid installing the unit in locations described below:
Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
On top of other stereo equipment that radiate too much heat.
Places locking ventilation or dusty places.
Places subject to constant vibration.
Humid or moist places.
* Make sure not to obstruct the ventilation opening.
Operate turning controls and switches as instructed in the manual.
* Before turning on t he power for the first t ime, make certain the power cord is p roperly installed.
* Store your tapes or CD in a cool area to avoid damage from heat.
For safety reasons, do not remove any covers or attempt to gain access to the inside of the product.
Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable
parts inside, refer all servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK),
NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIE D SERVICE
PERSONNEL.
DANGEROUS VOLTAGE
Conductor dangerous voltage, that may be of sufficient magnitude to constitute a risk of
electric shock to persons is present within this product’s enclosure.
ATTENTION
The owner’s manual contains important operating and maintenance instructions, for your
safety, it is necessary to refer to the manual.
WARNING :TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
DRIPPING OR SPLASHING.
Note:
This unit will become warm when used for a long period of time. This is normal and does not indicate a
problem with the unit.
This CD player includes micro-processors which may malfunction as a result of external electrical
interference or noise. If the CD player is not working properly, disconnect the power source and
then reconnect it.
UK - 3
FEATURES AND CONTROLS
1. SKIP / SEARCH UP BUTTON
2. SKIP / SEARCH DOWN BUTTON
3. PLAY / PAUSE BUTTON
4. STOP BUTTON
5. REPEAT BUTTON
6. PROGRAM BUTTON
7. PHONES JACK BUTTON
8. LCD DISPLAY WINDOW
9. POWER BUTTON
10. MUTE BUTTON
11. IR SENSOR
12. TUNING KNOB
13. CD DOOR
14. AM / FM / FM.ST SWITCH
15. CD / RADIO SWITCH
16. VOLUME UP / DOWN BUTTON
17. CD DOOR OPEN BUTTON
REMOTE CONTROL
1. POWER BUTTON
2. PLAY / PAUSE BUTTON
3. STOP BUTTON
4. SKIP / SEARCH DOWN / UP BUTTON
5. REPEAT BUTTON
6. RANDOM BUTTON
7. MUTE BUTTON
8. VOLUME DOWN / UP BUTTON
9. BATTERY DOOR
18. X-BASS ON / OFF SWITCH
19. SPEAKER TERMINALS
20. FM ANTENNA
21. SUBWOOFER LINE-OUT
22. AC POWER MAIN SWITCH
23. 110V / 220V DUAL VOLTAGE (OPTIONAL )
24. AC CORD
25. SPEAKER
26. SUBWOOFER VOLUME UP / DOWN
BUTTON
27. SUBWOOFER POWER ON / OFF
BUTTON
28. SUBWOOFER LINE-OUT JACK
29. DUAL VOLTAGE SWITCH
30. SUBWOOFER POWER STANDBY
INDICATOR
PUTTING THE BATTERIES INTO THE
REMOTE CONTROL UNIT
Press down of the compartment cover, and slide
the cover off open the compartment.
Place the two ( UM3 ), ( AA ), (R6 ) batteries
in the remote control according to the polarity
markings ("+" and "--') inside the compartme nt
and on the batteries.
Place the cover over the compartment, press
down lightly, and push it upward until it snaps on.
NOTE : Replace all batteries at the same time.
Remove the batteries the remote control is not in
use for long periods, don’t mix normal batteries
with rechargeable batteries, when the batteries
become weak, remote control will be not
functioned, replace with new batteries if above
happened.
UK - 4
** BATTERIES NOT INCLUDED **
INSTALLING THE SPEAKER WIR E TO THE SPEAKER TERMINALS
1. Speakers Connection
Extend the SPEAKER WIRES and connect them to the SPEAKER TERMINALS.
2. Power Cord Connection
Before using, connect the AC Power Cord to the AC outl et, then turn on th e main switch of
the unit.
INSTALLING THE SUBWOOFER WIRE TO THE SBB LINE IN TERMINALS
1. Subwoofer Connection
Extend the SUBWOODFER WIRE and conn ect it to the SBB LIN E IN TERMINAL.
2. Power Cord Connection
Before using, connect the AC Power Cord to the AC outl et, then turn on th e main switch of
the SUBWOOFER.
OPERATING THE UNIT
When you first plug the unit into the AC outlet, the unit will be in standby mode.You can press the
POWER button on the unit (or on the remote control) to switch the unit ON and OFF. Pull the AC plug
out of the wall socket if you want to switch off completely.
ADJUSTING THE SOUND
Press the volume +/- buttons to set the sound level. For increased bass at all volume levels, switch
the BASS SWITCH on to boost the low frequency sound. To mute the sound, press MUTE button
and the "POWER" indicator will flash. To resume the sound, press the MUTE butto n again or just
press the volume +/- button to disable the MUTE function.
LISTEN TO THE MUSIC BY USING HEADPHONE
A stereo headphone jack is provided for private listening. To listen to the unit with headphones(not
included)insert the 3.5mm mini-stereo plug from the headphones i nto the PH ONES jack on the
front panel. The external speakers are automatically disconnected when headphones are in use.
RADIO OPERATION
Set the FUNCTION switch to RADIO.
FM
Select FM mode band selector switch. Turn the TUNING control to select the required station. The FM
stereo indicator light will show a stereo broadcast is b eing received. Fully extend the FM antenna and
adjust its direction for best FM reception.
AM
Select AM on band selector switch. T urn the TUNING control to select the required station. For operation on AM the set control a built-in ferrite aerial which is directional. Therefore, the set should b e
positioned for the best signal strength.
FM STEREO RECEPTION
For reception of a FM stereo broadcast station, set the AM / FM / FM ST. switch to FM ST. position. The
" " will indicate on the LCD display when a FM STEREO broadcast is being received.
FM ANTENNA
FM antenna wire for better FM reception.
UK - 5
LISTENING TO COMPACT DISC (CD)
The LCD indicator always shown the tracks of a disc or program which are still to be played. It works in
all modes, in stop mode, all tracks of the disc or the program are shown.
Playing The Entire Disc
1. Playback will start by pressing PLAY/PAUSE, the " " indicator then appears.
Playback starts with the first track.The display shown the current track number and its elapsed time.
2. To interrupt playback, press PLAY/PAUSE. The " " indicator will flash.
3. To resume playback, p ress PLAY/PAUSE again.
4. To stop playback, press STOP.
Selection A Different Track During Play
1. Press SKI P/SEARCH b utton on the unit (or remot e), the required track number app ears in the
display.
2. Press PLAY/PAUSE button to starting playing. Starting ag ain with the track that is currently playing.
Starting Again With The Track That Is Currently Playing
1. Press SKIP F.R. once.
2. The track will be started again from the beginning.
Stopping Play
1. Press STOP if you wish to stop play. The disc and track number which can be played will now
appear in the display.
2. Open the CD door on the unit to remove the CD.
PROGRAMMED PLAYBACK
Up to 20 tunes can be programmed for listening and played.
1. Press the PROG button.(F.1)
2. Select the desired track number using the SKIP/SEARCH
button on the unit (or remote).(F.2)
3. Press the PROG button to memories the track select ion.
4. Repeat steps 1 and 3 as to memories up to 20 t racks.
(F.1)
5. Press PLAY / PAUSE button, to play starts with the first
track of the program.
6. To stop playing, press the STOP button.
7. Opening the door clears all programmes.
(F.2)
RANDOM PLAY (for Remote Handset)
1. Press the RANDOM button once, and the "RANDOM" indicator will light up .
2. Press the PLAY / PAUSE button to start playing. The tr acks will be played randomly.
3. To cancel random play, either press the STOP button twice or press the RANDOM button once
again, until the "RANDOM" indicator disappeared.
REPEAT PLAY
1. When playing CD, If repeat the same track only, press the REPEAT button once and the "REPEAT"
indicator will light up and flash.
2. If you desire to repeat all, press REPEAT button twi ce and the "REPEAT" indica tor will light up a nd not flash.
3. To cancel repeat play, press the STOP button twice until the repeat indicator disappeared.
UK - 6
COMPACT DISC
1. Always use a compact discs bearing the mark as shown.
2. Notes on handling discs
Removing the disc from its storage case and loading it.
* D o not touch the reflective rec orded surface.
* D o not stick paper or write anyth ing on the surface.
* D o not bend the disc.
3. Storage
* Store the disc in its case.
* Do not expose discs to direct su nlight or high temperatures, high humidity or dusty
places.
4. Cleaning a disc
* Should the disc become so iled, wipe off dust, dirt and fingerprints with a soft cloth.
* T he disc should be cleaned from th e center to the edge.
FROM THE CENTRE TO THE EDGE
CORRECT
INCOR RECT
* N ever use benzene, thinners, recor d clea ner fluid or anti static spray.
* Be sure to close the CD door so the lens is not contaminated by dust.
* Do not touch the lens.
UK - 7
CD DISPLAY WINDOW
A. STEREO INDIC ATOR
B. PROGRAM IND ICATOR
C. RANDOM INDICATOR
D. REPEAT INDICA TOR
E. TRACK NUMBER IN DICATOR
F. PLAY INDICATOR
SPECIFICATION
POWER SUPPLY : AC 120V~ 60Hz
SUBWOOFER : 20WRMS
OUTPUT POWER : 4.5 WATTS x 2
UNIT DIMENSION : 135 (L) x 253 (W) x149 (H) mm
SPEAKER BOX DIMENSION : 90 (L) x 225 (W) x 190 (H) mm
N. W.: 4.2 kg
RADIO SECTION
FREQUENCY RANGE : FM 87.5 - 108 MHz
AM 530 - 1710 kHz
COMPACT DISC SECTION
OPTICAL PICKUP : 3 - BEAM LASER
FREQUENCY RESPONSE : 100Hz - 16kHz
SPECIFICATION SUBJECT TO CHANGE WITHOUT FU RTHER NOTICE.
Dripping warning :
" The product shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the product."
Ventilation warning :
" The normal ventilation of the product shall not b e impeded for intended use."
UK - 8
Loading...