Sylvania QUICKTRONIC PROStart DL40 DATASHEET

www.sylvania.com

QUICKTRONIC®PROStart®DL40

Professional Series

Lamp / Ballast Guide

40W T5 - DULUX®L

1-lamp QTP1x40TT5 PSN-F 2-lamp QTP2x40TT5 PSN-F 3-lamp QTP3x40TT5 PSN-B

Primary Lamp Type:

FT40DL

Also operates:

FT40DL/28W/SS

Key System Features

• PROStart Programmed Rapid Start Ballast

• 88% Ballast factor

• QUICKSENSE®ballast technology (end-of-lamp-life sensing)

DL40 PSN

• 0°F (-18°C) Starting

• High luminous efﬁcacy

• Virtually eliminates lamp ﬂicker

• Quiet operation

• High power factor

• Low harmonic distortion

• Lightweight

• UL, CSA, FCC

• Auto Reset

Application Information

SYLVANIA QUICKTRONIC PROStart DL40 is ideally suited for:

• Occupancy sensors

• Building control systems

• Any applications where maximum lamp life is required to reduce maintenance costs

SYLVANIA QUICKTRONIC PROStart DL40

operates DULUX L 40 lamps with maximum efﬁcacy and high lumen output.

PROStart DL40 provides over 20% more lumen output than 34T12 systems. Also, the small lamp diameter and sleek proﬁle provide new design options and improved ﬁxture optics.

SYSTEM DL40 ballasts contain QUICKSENSE ballast technology, a patented circuitry designed to shut down the system reliably and safely when the lamps have reached their end-of-life.

Setting the standard for quality, SYSTEM DL40 is also covered by our QUICK 60+ warranty, the ﬁrst and most comprehensive system warranty in the industry.

SYSTEM PROStart DL40 is available in one, two, and three lamp models in 120V and 277V to cover a wide range of applications.

System Information

QUICKTRONIC PROStart ballasts provide optimum starting conditions to provide over 50,000 switching cycles for occupancy sensor and building control system applications.

QUICKSENSE ballast technology helps to protect against over-heated bases and sockets, as well as cracking of the glass wall, and uses dynamic end-of-lamp-life sensing to avoid false shutdowns caused by some static sensing methods. QUICKSENSE ballast technology will auto reset when the lamps are replaced with new ones.

A complete OSRAM SYLVANIA System Performance Guide showing performance characteristics for all combinations of lamps and ballasts is available upon request.

<10% THD Electronic TT5 Fluorescent

Programmed Rapid Start Systems

Normal Ballast Factor

Input Initial System System Type Power System Efﬁcacy (2 x 2) (W) Lumens LPW

FB40T12 - Std. Magnetic Ballast 96 5795 60

E.S. Magnetic Ballast 86 5795 67

FB34T12 - E.S. Magnetic Ballast 72 4575 66

FBO32T8 - Magnetic 71 5415 76

DL40 - QTP2x40TT5-PSN 76 5545 73

DL40 - QTP3x 40TT5-PSN 110 8315 76

SPECIFICATION DATA

BALLAST

LAMP

Red Red

Blue Blue

Neutral

Line

Red

Blue Blue

BALLAST

Neutral

Line

Yel lo w

LAMP

Yellow

Neutral

Line

LAMP

Red Red

Blue Blue

Yel lo w

Blue/Wht

BALLAST

LAMP

Catalog # Date Type

Project Prepared by

Comments

Normal Ballast Factor

DL40 PROStart

Professional Series

<10% THD Electronic TT5 Compact Fluorescent Systems

Input Input Rated Ballast Input System Item Voltage Current Lamp Lumens No. of Factor System Mean Power Efﬁcacy Number Description (VAC) (AMPS) Type (lm) Lamps (BF) Lumens Lumens (W) (lm/W) BEF

50320 QTP 1x40TT5/120 PSN-F 120 0.32 FT40T5 3150 1 0.88 2770 2385 38 73 2.32

50330 QTP 1x40TT5/277 PSN-F 277 0.13 FT40T5 3150 1 0.88 2770 2385 37 75 2.38

50340 QTP 2x40TT5/120 PSN-F 120 0.63 FT40T5 3150 2 0.88 5545 4770 76 73 1.16

50350 QTP 2x40TT5/277 PSN-F 277 0.27 FT40T5 3150 2 0.88 5545 4770 73 76 1.21

50360 QTP 3x40TT5/120 PSN-B 120 0.92 FT40T5 3150 3 0.88 8315 7150 110 76 0.80

50370 QTP 3x40TT5/277 PSN-B 277 0.39 FT40T5 3150 3 0.88 8315 7150 108 77 0.81

1: Ballast Efﬁciency Factor (BEF) shown = (Ballast Factor X 100) divided by Input Power.

Performance Guide

Data based upon SYLVANIA DL40 lamps shown. QUICKTRONIC®PROStart DL40 is also compatible with other

lamp manufacturers equivalent lamp types that meet ANSI speciﬁcations.

Speciﬁcations

Data based on DL40

Starting Method: Programmed

Rapid Start

Ballast Factor: 0.88 Circuit Type: Series Lamp Frequency: >40 kHz Lamp CCF: Less than 1.5 Starting Temp: 0°F (-18°C) Input Frequency: 60 Hz Low THD: <10% Power Factor: >99% Voltage Range: ±10% of Rated Input

UL Listed Class P, Type 1 Outdoor CSA Certiﬁed 70°C Max Case Temperature FCC 47CFR Part 18 Non-Consumer Class A Sound Rating ANSI C62.41 Cat. A Transient Protection Remote Mounting (Max. wire length from ballast case to lampholder): up to 10 feet

DL40 PSN

Dimensions “B” Enclosure: Dimensions “F” Enclosure

Overall: 9.5" L x 2.38" W x 1.25" H Overall: 9.5" L x 1.6" W x 1.0" H Mounting: 8.91" Mounting: 8.91"

Packaging: Packaging: Quantity: 20 pieces Quantity: 20 pieces Weight: 1.3 lbs each Weight: 0.75 lbs each

Wiring:

Leads only

Length

Width

Mounting Length

Item Number 50350 QTP 2 x 40TT5 / 277 PSN F

QUICKTRONIC PROFESSIONAL

Number of Lamps (1, 2, 3)

Speciﬁcations subject to change without notice.

Length

Mounting Length

Enclosure Type (F)

Starting Type/Ballast Factor

Line Voltage

Primary Lamp Type (FT40T5)

Width

2 Operation below 50°F (10°C) may affect

light output or lamp operation – see “Low Temp. Starting” deﬁnition.

System Life / Warranty

QUICKTRONIC products are covered by our QUICK 60+®warranty, a comprehensive lamp and ballast system warranty. For additional details, refer to our QUICK 60+ warranty bulletin.

OSRAM SYLVANIA National Customer Service and Sales Center

1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com