Sylvania QUICKTRONIC POWERSENSE T8 User Manual

www.sylvania.com

QUICKTRONIC® POWERSENSE® T8
Universal Voltage Dimming Systems

High Efficiency Series

Lamp / Ballast Guide

32W T8 - SYLVANIA OCTRON® lamps

1-lamp QTP1x32T8/UNV DIM
2-lamp QTP2x32T8/UNV DIM
3-lamp QTP3x32T8/UNV DIM
4-lamp QTP4x32T8/UNV DIM

Primary Lamp Types

FO32, FBO32 & FBO31

Also operates:

FO30/SS, FO28/SS, FO25/SS, FO25,
FO17, FBO24 & FBO16

Key System Features

• Industry’s rst ballast that combines

dimming inputs from 0-10V and/
or two-wire AC dimming providing
maximum flexibility

• Compatible with low voltage and

power line fluorescent dimmers

• High Efciency

• NEMA Premium Electronic Ballast

Program compliant

• Lamp Detection Technology

• Universal voltage (120-277V)

• 100 - 5% Dimming Range

• PROStart® Programmed Rapid Start

• Anti-ash circuitry - turns on in

dimmed mode

• Operates at >42kHz

• QUICK 60+ ballast and lamp warranty

• RoHS compliant

• Lead-free solder, printed circuit board

and manufacturing process

Application Information

SYLVANIA QUICKTRONIC
POWERSENSE ballasts

are ideally suited for:

• Occupancy sensors

• Daylight harvesting

• Energy management

• Load shedding

• New construction

• Retrot

SYLVANIA QUICKTRONIC High Efficiency,
POWERSENSE T8 electronic ballasts offer

several advantages:

• Wide Dimming Range: operate linear
fluorescent T8 lamps over a 100-5%
dimming range and provide true versa­tility in controls selection.

• Industry’s Most Adaptable Dimming

Ballast: ballasts feature micro-controller
technology for compatibility with:

• low voltage controls

• power line uorescent dimmers

• any line voltage from 120V to 277V

• Unmatched Performance: patented
lamp detection technology that virtually
eliminates variations in brightness from
lamp-to-lamp and provides uniform
lighting throughout the dimming range.
At light levels of >75% unnecessary
lamp-coil power is turned off, delivering
energy efficiences comparable to non­dimming Instant start electronic ballast.
This technology also eases installation
and troubleshooting by recognizing
failed lamps, faulty wiring or loose
connections, and shutting down.

System Information

QUICKTRONIC POWERSENSE ballasts
operate from standard low voltage
(0-10VDC) fluorescent controllers or
compatible 2-wire power line fluorescent
dimmers, making them ideal for individual
office lighting or automated building
applications, both in new construction
and retrofit projects.

For the individual office or conference
room, installation can be streamlined
by using a 2-wire power line fluorescent
dimmer; eliminating the need for additional
control wires.

For more advanced systems, such as
daylight harvesting or building automation
applications, standard low voltage devices
(0-10VDC, Class 1 or 2) are used to control
the lighting system. In this daylight
harvesting example, each lighting fixture
(or fixture row) is controlled by it’s own
photosensor; regulating the light output

When the problem is corrected,
the system restarts automatically.

• NEMA Premium Electronic Ballast

Program compliant. This program
promotes the use of high efficiency
T8 electronic ballasts by meeting
or exceeding the Ballast Efficiency
Factors, (BEF) established by the CEE,
(Consortium for Energy Efficiency). For
additional information on this program

to compensate for changes in natural
daylight. Depending upon the specific
application, energy savings of up to 60%
compared to fixed output T8 electronic
systems can be realized.

Daylight Harvesting Scenario

Fixture

Light Sensor 1 Light Sensor 2 Light Sensor 3

1

Window / Natural Light Source

Fluorescent Controllable

Lighting Systems

go to: www.cee1.org or www.nema.org

These ballasts are RoHS compliant and
feature lead-free solder, printed circuit
boards and manufacturing process.

Setting the standard for quality,
QUICKTRONIC POWERSENSE ballasts are
covered by the QUICK 60+® warranty,
the first and most comprehensive lamp &
ballast system warranty in the industry.

All QUICKTRONIC POWERSENSE ballasts
include a line voltage protection circuit,
which protects the ballast in the event
that line voltage is inadvertently applied
to the low voltage control inputs.

Fixture

2

Fixture

3

Desired Illuminance E

Constant setpoint value

r

P O W E R S E N S E

T 8 D I M

ECS201 – 2/2011

QTP2x28T5/UNV DIM TCL

POWERLINE CONTROL

LINE

BLACK

NEUTRAL

WHITE

INSULATE
UNUSED LEADS

VIOLET

(+)

GREY (-)

SPECIFICATION DATA

Catalog # Date Type

Project Prepared by

Comments

T8 POWERSENSE

High Efficiency

QUICKTRONIC® POWERSENSE® Controls Information

Fluorescent Building
Controls Powerline 0-10 VDC Photo Occupancy Management
Manufacturer Controllers Controllers Cells Sensors Systems

SYLVANIA ELOGIC™ Controls
1-800-LIGHTBULB
www.sylvania.com x x x x

Encelium
www.encelium.com x

Hunt Dimming
www.huntdimming.com x x x x x

Lehigh Electronic Products

C O N T R O L S

www.lehighdim.com x x x x x

P O W E R S E N S E

Leviton Lighting Controls
www.leviton.com x x x x

Lightolier Controls
www.lolcontrols.com x x x x x

Lithonia Controls
www.lithonia.com x x x x x

Lumisys
www.lumisys1.com x x x

PCI
www.pcilightingcontrols.com x x

Sensorswitch
www.sensorswitch.com x x

Siemens Energy & Automation
www.sea.siemens.com x

Starfield Controls
www.starfieldcontrols.com x x x x

The Watt Stopper, Inc
www.wattstopper.com x x

Please contact controls manufacturers to order/specify controls. For the latest controls list go to www.sylvania.com

Also for more information, check out the LCA (Lighting Controls Association) site: www.aboutlightingcontrols.org

Dimensions:
1 & 2 lamp enclosure

Overall: 9.5" L x 1.68" W x 1.0" H (241 x 43 x 25 mm)
Mounting: 8.90" (226 mm)
Weight: 1.1 lbs each (500 g)

3 & 4 lamp enclosure

Overall: 16.7" L x 1.68" W x 1.0" H (425 x 43 x 25 mm)
Mounting:16.2" (411 mm)
Weight: 2.1 lbs each (950 g)

Wiring:

Leads Only

Input & Control
Wiring Options:

LOW-VOLTAGE CONTROL

LINE

NEUTRAL

0-10V

< 0.5mA

DC

Class 1 o r
Class 2

Control Specifications/model numbers may change.

Please consult manufacturers listed for their latest control models and to order their controls.

Specifications subject to change without notice.

BLACK

WHITE

VIOLET

GREY (-)

(+)

Height

25.4mm
(1.0")

Height

8.70 mm
Slot

Width

Mounting

Length

Length

Mounting

411.3mm
(16.2")

Length
425mm
(16.7")

POWERLINE CONTROL

LINE

NEUTRAL

INSULATE
UNUSED LEADS

BLACK

WHITE

VIOLET

GREY (-)

(+)

Width
43mm
(1.68")

Controls Guide

Warning

Install and wire these ballast and controls
in accordance with the National Electrical
Code (NEC), all applicable Federal, State and
local electrical codes, as well as the specific
instructions provided with the compatible
control that you purchased. Installation should
be performed by qualified personnel only.

These instructions are guidelines only.
Installation may vary for different controls/
fixtures/applications. Be sure to follow the
control instructions and all applicable codes
and standards when installing dimming
systems.

Please contact controls manufacturer listed
in the OSRAM SYLVANIA Inc. controls cross
reference for compatible controls and
instruction wiring.

NOTES:

1. Dimming ballasts source < 0.5mA
(0-10VDC control input).

2. Powerline controls must be rated for the
type (e.g. Fluorescent Phase-control)
and size (e.g. 600W, 1000W, 1500W &
2000W etc.) of the connected load. Do
NOT use incandescent powerline controls;
incandescent dimmers are not rated for
fluorescent loads and are NOT compatible
with POWERSENSE ballasts.

OSRAM SYLVANIA
National Customer
Service and Sales Center

1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com

To
Fluorescent
Lamps

Violet (+)

DIMMING
BALLAST

Black
White

Photo Sensor 0-10V Wiring Example

0-10V DC Control with POWERSENSE Ballasts

0-10V

Control

Gray (-)

Neutral (White)

120 or 277V
Black (Hot)

LINE

Gray

Violet

Class 1 or Class 2 circuit

To
Fluorescent
Lamps

Violet (+)

DIMMING

BALLAST

Black
White

Gray (-)

To
Additional
Ballasts

Photo

Sensor

0-10V

Standard

Line Voltage

Switch

Black

Photo Sensor 0-10V Wiring Example

0-10V DC Control with POWERSENSE Ballasts

SPECIFICATION DATA

Catalog # Date Type

Project Prepared by

Comments

QUICKTRONIC® POWERSENSE® T8 Dimming UNV - Dimming Control Wiring Examples

Industry’s 1st Ballast That Allows POWERLINE Fluorescent Control AND 0-10Vdc Control Input Simultaneously

T8 POWERSENSE

High Efficiency

2-wire Powerline AND 0-10Vdc Control with POWERSENSE Ballasts

2-wire
Fluorescent

Fluorescent AC Dimming
No Control Wires

• Occupant Wallbox Dimming

• Lighting Panel Dimming

• Excellent for Retrofit

0-10Vdc Low Voltage
Industry Standard Interface

• Daylight Harvesting

• Building Management

• Demand Response Override

120 or 277V
Black (Hot)

LINE

Neutral (White)

Powerline Dimmer

Black

0-10V

Control

Violet

Black
White

Violet (+)

Gray (-)

Gray

DIMMING
BALLAST

0-10V

Class 1 or Class 2 circuit

Wallbox Style 2-wire Powerline Control Wiring Example

Specification-grade controls are available for 120V or 277V

Powerline Control Specs:

operation of controllable analog electronic fluorescent ballasts.

Controls must be suitably rated for both the type (e.g. Fluorescent

Phase-control) and size (e.g. 600W) of the connected load.

ELOGIC™ MANUAL CONTROL SLIDE FLUORESCENT PHASE CUT DIMMER

Maximum Input Current (A)
Item OSRAM SYLVANIA (# of gangs) Input Integral
Number Description Single Double Triple Voltage (V) Color Switch

45045 ELMC-SL-FLPCWALL/120-WH

45046 ELMC-SL-FLPCWALL/277-WH

5.0A 4.5A 4.0A

2.2A 2.0A 1.7A

120

277

Black (Hot)

LINE

Neutral (White)

White

White

2-wire Powerline Control with POWERSENSE Ballasts

2-wire
Fluorescent
Powerline Dimmer

Single Pole

Wallbox Style 0-10V Control with Power Switch Wiring Example

Black

DIMMING

To
Fluorescent
Lamps

Black

White

Violet (+)

BALLAST

Gray (-)

Black
White

Violet (+)

Gray (-)

For 2-wire Powerline wiring, individually insulate (cap-off)

all unused Violet & Gray leads as shown.

DIMMING
BALLAST

CAUTION:

0-10V

To
Fluorescent
Lamps

To
Fluorescent
Lamps

To
Additional
Ballasts

Black
White

Violet (+)

Gray (-)

DIMMING
BALLAST

To
Fluorescent
Lamps

Examples: Leviton IPX series operate as
single pole or 3-way models. Available in
120V and 277V models. Leviton 6668-1W
(white) 120V single pole fluorescent dimmer.

To
Additional
Ballasts

WI R I NG & C ONTR O L S

PO W E RSEN S E

Examples: Lithonia model ISD BC
or Leviton IP 710 Series (These
0-10V dc, 120/277V models can be
wired for single pole application
(shown); these models can also be
wired for 3-way applications.)

OSRAM SYLVANIA National Customer Service and Sales Center 1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com

Specifications subject to change without notice.

0-10V DC Control with POWERSENSE Ballasts

120 or 277V
Black (Hot)

LINE

Neutral (White)

0-10Vdc

Wallbox
Control with
Line Voltage

Switch

Black

Line

Voltage

Switch

0-10V

Control

Black
White

DIMMING

Violet (+)

BALLAST

Gray (-)

Class 1 or Class 2 circuit

Black

Violet

Gray

Photo Sensor 0-10V Wiring Example

Ballast Output Max.
Item OSRAM SYLVANIA Control Voltage Input Lamp
Number Description Type Method (VDC) Current (mA) Type

45030 ELSC-DLH-TVLAMP/BUS
Daylight Harvesting

To
Fluorescent
Lamps

On/Off

Switch (120/277V)

Slide Dimmer

0-10V

Black
White

DIMMING

Violet (+)

BALLAST

Gray (-)

ELOGIC DAYLIGHT SENSOR ORDERING INFORMATION

Sensor & Control for

To
Fluorescent
Lamps

Analog 0-10V 6 T8 or T5 or T5HO

To
Additional
Ballasts

SPECIFICATION DATA

Black
White

Violet (+)
Grey (-)

Red
Red

Blue
Blue

LAMP 1

ELECTRONIC

BALLAST

Catalog # Date Type

Project Prepared by

Comments

T8 POWERSENSE

High Efficiency

®

High Efficiency, T8 Controllable Lighting Systems, UNV (120-277V)

Input Rated Ballast Input System
Item OSRAM SYLVANIA Current Lamp Lumens No. of Factor System Mean Power (W) Efficacy
Number Description (AMPS) Type (lm) Lamps (BF) Lumens Lumens 120V 277V (lm/W) BEF

50705 QTP 1x32T8/UNV DIM-TC 0.27/0.12 FO32XP 3000 1 0.88 2640 2480 30 30 88 2.93

0.05 150 140 8 8

0.24/0.11 FO30/SS 2850 1 0.88 2510 2360 28 28 90 3.14

0.05 145 135 8 8

0.22/0.10 FO28/SS 2725 1 0.88 2400 2255 25 25 96 3.52

0.05 135 130 8 8

0.20/0.09 FO25/SS 2475 1 0.88 2180 2045 23 23 95 3.83

0.05 125 115 7 7

T 8 D I M

50707 QTP 2x32T8/UNV DIM-TC 0.51/0.24 FO32XP 3000 2 0.88 5280 4965 59 57 93 1.54

0.05 300 280 14 14

P O W E R S E N S E

0.48/0.20 FO30/SS 2850 2 0.88 5015 4715 55 53 95 1.66

0.05 285 270 14 14

0.43/0.18 FO28/SS 2725 2 0.88 4795 4510 51 49 98 1.80

0.05 275 255 13 13

0.39/0.16 FO25/SS 2475 2 0.88 4355 4095 45 44 99 2.00

0.05 250 235 13 13

50714 QTP 3x32T8/UNV DIM-TCL 0.73/0.30 FO32XP 3000 3 0.88 7920 7445 87 84 94 1.05

0.05 450 425 20 20

0.68/0.30 FO30/SS 2850 3 0.88 7525 7075 81 78 96 1.13

0.05 430 400 20 20

0.62/0.26 FO28/SS 2725 3 0.88 7195 6760 73 72 100 1.22

0.05 410 385 19 19

0.56/0.24 FO25/SS 2475 3 0.88 6535 6140 67 66 99 1.33

0.05 370 350 19 19

50716 QTP 4x32T8/UNV DIM-TCL 0.96/0.40 FO32XP 3000 4 0.88 10,560 9925 114 110 96 0.80

0.05 600 565 27 27

0.92/0.39 FO30/SS 2850 4 0.88 10,030 9430 107 104 96 0.85

0.05 570 535 26 26

0.82/0.35 FO28/SS 2725 4 0.88 9590 9015 98 95 101 0.93

0.05 545 510 25 25

0.74/0.32 FO25/SS 2475 4 0.88 8710 8190 91 89 98 0.99

0.05 495 465 24 24

Products are all 10-pack. *Striation might occur with SUPERSAVER lamps.
1: System Efficacy calculation based on lowest input power value.
2: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).

Wiring Diagrams

Output Wiring: Lamp wiring for dimming ballasts can differ significantly from non-dimming ballasts and from

other manufacturers dimming ballasts. Take care to connect lamp lead wires as shown on the applicable
ballast diagram. Lamp Seasoning: For optimal performance, fluorescent lamps may require seasoning for up to 12 hours prior to low temperature starting &
low level dimming. Refer to NEMA LSD 23-2002 Lighting Systems Division: Recommended Practice — Lamp Seasoning for Fluorescent Dimming Systems

1 lamp

Black
White

Violet (+)
Grey (-)

ELECTRONIC

BALLAST

LAMP 1

3 lamp

Black

White

ELECTRONIC

Violet (+)

Grey (-)

BALLAST

Item Number 50707 QTP 2 x 32T8 / UNV DIM-TC

Red

Red/White
Red/Black

Red/White

Yellow
Yel/Blk

Yellow

Blue

Red
Red

Blue
Blue

LAMP 1

LAMP 2

LAMP 3

QUICKTRONIC

Number of Lamps (1, 2, 3, 4)

SYLVANIA, the system solution, QUICK60+, POWERSENSE, See the World in a New Light, PROStart, OCTRON and SUPERSAVER are registered trademarks of OSRAM SYLVANIA Inc.
ELOGIC is a trademark of OSRAM SYLVANIA Inc. QUICKTRONIC is a registered trademark of OSRAM GmbH. NEMA Premium is a registered trademark of National Electrical Manufacturers Association.

2 lamp

4 lamp

Black

White

Violet (+)
Grey (-)

Black
White

Violet (+)
Grey (-)

ELECTRONIC

BALLAST

Red
Red

Red

Red/White
Red/Black

Red/White

Yellow
Yellow/Black

Yellow

Blue/White
Blue/Black

Blue/White

Blue

Blue

Blue
Yel/Blk
Yellow
Yellow

LAMP 1

LAMP 2

LAMP 3

LAMP 4

ELECTRONIC

BALLAST

LAMP 1

LAMP 1

LAMP 2

System Type - DIMMING/Case Size

Line Voltage (120-277V)

Primary Lamp Wattage

1

Performance Guide

Data based on SYLVANIA OCTRON® lamps
shown. QUICKTRONIC® POWERSENSE
ballasts are also compatible with other

2

manufacturers equivalent lamp types that
meet ANSI specifications, including F17,
F25, F32, U-Bend equivalent lamps and
SUPERSAVER lamps.

Specifications

Data based on F32T8

Starting Method: Programmed Rapid Start
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.7
Starting Temp: 50°F/10°C minimum

for OCTRON T8 lamps

Input Voltage: 120-277V, ±10%
Input Frequency: 50/60 Hz
THD: <10% @ Full Output
Power Factor: >98% @ Full Output

UL Listed Class P, Type 1 Outdoor
CSA or C/UL Certified
70°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
RoHS compliant

3

ANSI C62.41 Cat. A Transient Protection
Remote mounting (Max. wire length from
ballast case to lampholder)

• up to 8ft for full wattage T8s

• no remote mounting for SUPERSAVER

3 Complies with European Union Restriction

of Hazardous Substances Directive (Directive
EC 2002/95)

Control Information

QUICKTRONIC POWERSENSE ballasts are
compatible with a wide range of low voltage
(0-10VDC) and power line fluorescent controllers
available from various manufacturers.
Low Voltage Control Specs: Ballast will source
up to 0.5mA for 0-10VDC control purposes.
May be wired as a Class 1 or Class 2 circuit­consult Local and National Electrical Codes.
Power Line Control Specs: Specification­grade fluorescent controls are available
for 120V or 277V operation of controllable
analog electronic fluorescent ballasts.
Controls must be suitably rated for both the
type (e.g. Fluorescent Phasecontrol) and size
(e.g. 600W) of the connected load.

System Life / Warranty

QUICKTRONIC products are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.

OSRAM SYLVANIA
National Customer
Service and Sales Center

1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com

Specifications subject to change without notice.

©20 11 O SRAM SYLVA NIA