Sylvania QT 54 PHO DIM DATASHEET

www.sylvania.com

100

Power Input (Watts)

QT2x54PHO-DIM

Light Output (BF)

30110 90 70 50120 100 80 60 40 20

QUICKTRONIC®HELIOS T5HO Dimming (0-10V)

Professional Series

Lamp / Ballast Guide

54W T5 - PENTRON®HO

1-lamp QT1x54PHO-DIM 2-lamp QT2x54PHO-DIM

Also operates:

FT55DL, FPC55

Key System Features

• 100-1% Dimming range

• QUICKSENSE®ballast technology (end-of-lamp-life sensing)

• PROStart®programmed rapid start ballast

QT54 PHO DIM

• QUICK 60+®warranty

• 1-10V Control

• Anti-ﬂash circuitry – turns on in dimmed mode

• High luminous efﬁcacy

• Virtually eliminates lamp ﬂicker

• High power factor

• Low harmonic distortion

• Lightweight

• UL, CSA, FCC

Application Information

SYLVANIA QUICKTRONIC PHO-DIM is ideally suited for:

• Commercial

• Retail

• Hospitality

• Institutional

• New construction

• Direct lighting

• Indirect lighting

• Surface mount

• Cove lighting

™

SYLVANIA QUICKTRONIC PHO-DIM

operates PENTRON HO, PENTRON HO Circline, and DULUX®L T5 lamps over a wide (100-1%) dimming range.

SYSTEM PHO-DIM provides nearly twice the light output (188%) of T8 systems, with the same number of lamps, allowing many new design options. One lamp ﬁxtures can now be used in place of two lamp models.

SYSTEM PHO-DIM is appropriate for lighting control for aesthetic reasons as well as lighting management for energy conservation through daylight harvesting or building automation.

Setting the standard for quality, SYSTEM PHO-DIM is also covered by our QUICK 60+ warranty, the ﬁrst and most compre- hensive system warranty in the industry.

System Information

PROStart ballasts provide optimum starting conditions to provide up to 100,000 switching cycles for use on occupancy sensors and building control systems.

QUICKSENSE ballast technology helps to protect against over-heated bases and sockets, as well as cracking of the glass wall, and uses dynamic end-of-lamp-life sensing, over the entire dimming range, to avoid false shutdowns caused by some static sensing methods. QUICKSENSE ballast technology will auto-reset when the end-of-life lamps are replaced with new ones.

SYSTEM PHO-DIM comes in a 30 x 30 mm proﬁle, and PENTRON lamps are designed to provide peak performance at 35°C ﬁxture ambient, allowing for smaller and more innovative ﬁxtures.

A complete OSRAM SYLVANIA System Performance Guide showing performance characteristics of lamps and ballasts is available upon request.

<10% THD Electronic T5HO Fluorescent

Controllable Lighting Systems

Normal Ballast Factor

SYSTEM PHO-DIM is available in one and two lamp models in 120V and 277V to cover a wide range of applications.

SPECIFICATION DATA

QUICKTRONIC 1x54PHO-DIM

LAMP

Black

DIMMABLE BALLAST

L N

–

White

Violet

Gray

3 4

1-10Vdc control input

Red

Blue Blue

Class 1 or Class 2 Circuit

QUICKTRONIC 2x54PHO-DIM

Black

DIMMABLE BALLAST

LAMP 2

LAMP 1

L N

White

Violet

Gray

1 2 3 4 5 6 7

1-10Vdc control input

Red Red

Blue

Yellow/Black

Yel lo w

Class 1 or Class 2 Circuit

–

Width

Mounting

Length

Height

Catalog # Date Type

Project Prepared by

Comments

Normal Ballast Factor

PHO-DIM (0-10V)

Professional Series

<10% THD Electronic T5HO Fluorescent Dimming Systems

Item Voltage Current Lamp Lumens No. of Factor System1Wattage Efﬁcacy Number Description (VAC) (AMPS) Type (lm) Lamps (BF) Lumens (W) (lm/W) BEF

49671

49675 Pallet Pack

49672

49676 Pallet Pack

49673

49677 Pallet Pack

49674

49678 Pallet Pack

Pallet pack (with leads/wires) contains 500 pieces each (add “-PAL” to description). 1: At 35°C lamp ambient temperature 2: Ballast Efﬁciency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power

Speciﬁcations subject to change without notice.

QT1x54/120PHO-DIM 120 0.54 FP54T5HO 5000 1 1.00 5000 62 81 1.61

20-Pack

QT1x54/277PHO-DIM 277 0.23 FP54T5HO 5000 1 1.00 5000 61 82 1.64

20-Pack

QT2x54/120PHO-DIM 120 1.07 FP54T5HO 5000 2 1.00 10000 120 83 0.83

20-Pack

QT2x54/277PHO-DIM 277 0.45 FP54T5HO 5000 2 1.00 10000 117 85 0.85

20-Pack

A list of compatible controllers and wiring examples are on pages 90 & 91.

Dimensions:

Overall: 425mm L x 30mm W x 30mm H Mounting: 415 mm

Wiring:

Push-in connectors Use 18AWG solid copper wire only

Product Weight:

Quantity: 20 pcs./case (no leads provided) 500 pcs/pallet pack (with leads/wires) Weight: 1.0 lbs ea. (approx)

Item Number 49673 QT 2 x 54 / 120 PHO-DIM

QUICKTRONIC PROFESSIONAL

Number of Lamps (1, 2)

Input Input Rated

Ballast

0.01 50 8

0.01 100 18

System Type – PHO-DIM

Line Voltage

Primary Lamp Wattage

Input1System

Performance Guide

Data based upon SYLVANIA PENTRON HO lamps shown. QUICKTRONIC®PHODIM ballasts are also compatible with

other lamp manufacturers equivalent lamp types that meet ANSI standards.

Speciﬁcations

Starting Method: Programmed

Rapid Start

Circuit Type: Series Lamp Frequency: >40 kHz Lamp CCF: Less than 1.7 Starting Temp: 50°F (10°C) minimum Input Frequency: 60 Hz Low THD: <10% Power Factor: >98% Voltage Range: ±10% of Rated Input

UL Listed Class P, Type 1 Outdoor CSA Certiﬁed 70°C Max Case Temperature FCC 47CFR Part 18 Non-Consumer Class A Sound Rating ANSI C62.41 Cat. A Transient Protection Dynamic End-of-Lamp-Life Sensing Remote Mounting (Max. wire length from ballast case to lampholder): up to 7 feet

3 Data based on PENTRON HO lamp type.

See the Sylvania QUICKTRONIC Electronic Ballast Technology and Speciﬁcation Guide (ECS-ELECTRONIC) for other lamp combinations.

Dimming Control Specs.

Dimming Control4: 1-10Vdc two wire control (10V = full output, 1V = minimum output)

Line Voltage Protection: Ballast goes to 90% if line voltage is inadvertently applied to control leads. Ballast will source up to 0.5mA for control purposes. May be wired as Class 1 or Class 2 circuit.

QUICKTRONIC HELIOS™ballasts are compatible with a wide range of 0-10V controllers available from various manufacturers.

A list of controls

companies are on pages 90-91.

System Life / Warranty

QUICKTRONIC products are covered by our QUICK 60+®warranty, a comprehensive lamp and ballast system warranty. For additional details, refer to our QUICK 60+ warranty bulletin.

OSRAM SYLVANIA National Customer Service and Sales Center

1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com

QT54 PHO DIM