Sylvania QTP T5HO, QS BI-LEVEL DATASHEET

www.sylvania.com

QUICKTRONIC®PROStart®T5HO

0.80BF Universal Ballast

Professional Series

Lamp / Ballast Guide

54W T5HO - PENTRON

2-lamp: QTP2x54T5HO/UNVPS80SC

QS2x54T5HO/UNVPS80SC

Also operates:

FT55DL

Key System Features

• QUICKSTEP Stepped Switching bi-level dimming

• Universal voltage (120-277V)

• QUICKSENSE®ballast technology (end-of-lamp-life sensing)

• PROStart programmed rapid start

• Operates at >40 kHz to reduce potential interference with infrared control systems

• High power factor (>98%)

QS BI-LEVEL & QTP T5HO

• <10% THD total harmonic distortion at full power

• UL, CSA, FCC

• Small can enclosure

Application Information

SYLVANIA QUICKTRONIC T5HO Ballasts are ideally suited for:

• Ofﬁce

• Schools

• Commercial

• Retail

• Hospitality

• Institutional

• New construction

• Renovations

The SYLVANIA QUICKTRONIC T5HO

0.80BF ballasts operate PENTRON T5HO

ECOLOGIC lamps. The ballast is tuned to provide a unique 0.80 ballast factor, providing 20% energy savings over conventional 2 lamp 54W T5HO systems. The system includes SYLVANIA’s new line of QUICKSTEP stepped switching ballasts. QUICKSTEP ballasts are specially designed to meet California Energy Commission’s Title 24 requirements for multi-level lighting controls (Section 131). The combined lamp and ballast system offers high performance features that are standard on SYLVANIA’s Professional Series of ballasts.

QUICKTRONIC T5HO ballasts contain QUICKSENSE ballast technology, a patented circuitry designed to shut down the system reliably and safely when lamps reach end-of-life.

System Information

QUICKTRONIC 0.80BF T5HO Systems operate from 120V through 277V, 50 or 60Hz, eliminating “wrong voltage” wiring errors and reducing the number of models in inventory by half.

The QUICKSTEP system has two AC line inputs in addition to the neutral wire. These AC line inputs must be connected to the same phase of the line voltage. The two line inputs can be conﬁgured to provide a bi-level light output system by wiring the system with two switches. Each switch provides 50% power to the ballast. When both switches are on, the lamps operate at full light output.

When either switch is off, the lamps operate in a dimmed mode and the ballast factor is reduced by 50%. In addition, system power is reduced to levels that are compliant with Section 131b-California Title 24.

<10% THD Electronic T5HO Fluorescent

Programmed Rapid Start Systems

0.80BF Professional and QUICKSTEP

Setting the standard for quality, PENTRON Systems are also covered by our QUICK

60+

warranty, the ﬁrst and most comprehensive system warranty in the industry.

System Comparisons (W) Lumens LPW

QS2x54T5HO/UNV PS80SC - FP54T5HO 96 8000 83 (2 lamp)

QTP2x54T5HO/UNV PSN - FP54T5HO 121 10,000 83 (2 lamp)

F32T8- 3 lamp Instant Start Electronic 88 7525 86

Alternatively, QUICKSTEP ballasts can be controlled by occupancy sensors allowing for customized zone controls and various energy saving conﬁgurations.

PROStart ballasts deliver optimum starting conditions to provide up to 100,000 switching cycles for use on occupancy sensors and building control systems.

QUICKTRONIC 0.80BF T5HO is available as a two-lamp model in either a Professional or QUICKSTEP version, to cover a wide range of applications.

Input Initial System

Power System Efﬁcacy

QUICKSENSE ballast technology helps to protect against overheated bases and sockets, as well as cracking of the glass wall, and uses dynamic end-of-lamp-life sensing to avoid false shutdowns caused by some static sensing methods. QUICKSENSE ballast technology will auto reset when the end-of-life lamps are replaced with new ones.

Series

SPECIFICATION DATA

Electronic

Ballast

Black

Yellow

Red

Blue

Lamp 1

Lamp 2

White

Electronic

Ballast

Black

Yel lo w Red

Blue

Lamp 1

Lamp 2

Black

White

Catalog # Date Type

Project Prepared by

Comments

0.80 BF & QUICKSTEP

T5HO BF 0.80

Professional Series

0.80BF T5HO Systems and QUICKSTEP®(Bi-Level) T5HO Dimming Systems (120-277V)

Input Rated

Item Current Lamp Lumens No. of Factor System1Mean1Power Efﬁcacy Number Description (AMPS) Type (lm) Lamps (BF) Lumens Lumens (W) (lm/W) BEF

QTP Fixed Output BF0.80

49418 QTP 2x54T5HO/UNV PS80SC 0.80/0.34 FP54T5HO 5000 2 0.80 8000 7440 96/93 83/86 0.86

QUICKSTEP Bi-Level Switchable Model

49419 QS 2x54T5HO/UNV PS80SC 0.80/0.34 FP54T5HO 5000 2 0.80 8000 7440 96/93 83/86 0.86

0.44/0.19 FP54T5HO 5000 2 0.40 4000 3720 52/51 77/78 0.78

1: At 35°C lamp ambient temperature. 2: Ballast Efﬁciency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).

Ballast

Input1System

Installation Notes

• Install in accordance with National & Local Electric Code

• Ground ballast case

• For QUICKSTEP ballasts, the AC line inputs must be connected to the same phase of the line voltage

• DO NOT CONNECT not covered by warranty

two separate phases of line voltage to the input of QUICKSTEP ballasts, the ballast will be damaged and

2-Lamp QTP

Fixed output only

Full light output (full power) S1 & S2 closed (on)

2-Lamp QS (QUICKSTEP)

Bi-level mode S1 or S2 open (off)

Performance Guide

Data based upon SYLVANIA PENTRON HO lamps shown. QUICKTRONIC®T5HO

0.80BF and QUICKSTEP ballasts are

also compatible with other lamp manufacturers equivalent lamp types that meet ANSI standards.

Speciﬁcations

Data based on FP54T5HO

Starting Method: Programmed

Rapid Start

Circuit Type: Series Lamp Frequency: >40 kHz Lamp CCF: Less than 1.7 Starting Temp: 50°F (10°C) minimum Input Frequency: 50/60 Hz Low THD: <10% (Full power)

<20% THD (@50% power)

Power Factor: >98% (Full power) Voltage Range: ±10% of Rated Input

UL Listed Class P, Type 1, Outdoor, CSA Certiﬁed 70°C Max Case Temperature FCC 47CFR Part 18 Non-Consumer Class A+ Sound Rating ANSI C62.41 Cat. A Transient Protection Dynamic End-of-Lamp-Life Sensing Remote Mounting (Max. wire length from ballast case to lampholder): up to 10 feet

NEW!

QS BI-LEVEL & QTP T5HO

Dimensions: Small Can (SC) enclosure size:

Overall: 9.5" L x 1.68" W x 1.18" H Mounting: 8.90"

Wiring:

Leads only

Packaging:

Quantity: 10 pcs Weight: 1.6 lbs each (approx)

Item Number 49419 QS 2 x 54 / T5HO/UNV PS80 SC

QUICKSTEP

Number of Lamps

Speciﬁcations subject to change without notice.

Height

8.70 mm Slot

Width

Mounting

Length

Case Size

Starting/Ballast Factor

Line Voltage (120-277V)

Primary Lamp Wattage

System Life / Warranty

QUICKTRONIC products are covered by our QUICK 60+®warranty, a comprehensive lamp and ballast system warranty. For additional details, refer to our QUICK 60+ warranty bulletin.

OSRAM SYLVANIA National Customer Service and Sales Center

1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com