Sylvania POWERSENSE T8 DIM DATASHEET
www.sylvania.com
QUICKTRONIC®POWERSENSE®T8
Dimming Universal Voltage
High Efficiency Series
Lamp / Ballast Guide
32W T8 - SYLVANIA OCTRON
1-lamp QTP1x32T8/UNV DIM
2-lamp QTP2x32T8/UNV DIM
3-lamp QTP3x32T8/UNV DIM
4-lamp QTP4x32T8/UNV DIM
T8 DIM
Primary Lamp Types
POWERSENSE
FO32, FBO32 & FBO31
Also operates:
FO25, FO17, FBO24 & FBO16
Key System Features
• Industry’s first ballast that combines
dimming inputs from 0-10V and/or
two-wire AC dimming providing
maximum flexibility.
• POWERSENSE compatibility with
low voltage and power line dimmers
• High Efficiency
• NEMA Premium Ballast compliant
• Lamp Detection Technology
• Universal voltage (120-277V)
• 100 - 5% Dimming Range
• PROStart Programmed Rapid Start
• Anti-flash circuitry - turns on in
dimmed mode
• Lightweight and low profile
• Operates at >42kHz
• QUICK 60+ ballast and lamp warranty
Application Information
SYLVANIA QUICKTRONIC
POWERSENSE is ideally suited for:
• Occupancy sensors
• Daylight harvesting
• Energy management
• Load shedding
• Commercial
• Retail
• Hospitality
• Institutional
• Schools
• New construction
• Retrofit
82
®
SYLVANIA QUICKTRONIC High Efficiency,
POWERSENSE T8 ballasts offer several
advantages:
1. Wide Dimming Range: operate linear
fluorescent T8 lamps over a 100-5%
dimming range and provide true versatility in controls selection.
2. Industry’s Most Adaptable Dimming
Ballast: ballasts feature micro-controller
technology for compatibility with:
• low voltage controls
• power line dimmers
• any line voltage from 120V to 277V
3. Unmatched Performance: patented
lamp detection technology that virtually
eliminates variations in brightness from
lamp-to-lamp and provides uniform
lighting throughout the dimming range.
At light levels of >75% unnecessary
lamp-coil power is turned off, delivering
energy efficiences comparable to nondimming Instant start electronic ballast.
This technology also eases installation
and troubleshooting by recognizing
failed lamps, faulty wiring or loose
System Information
QUICKTRONIC POWERSENSE ballasts
operate from standard low voltage
(0-10VDC) fluorescent controllers or
compatible 2-wire power line fluorescent
dimmers, making them ideal for individual
office lighting or automated building
applications, both in new construction
and retrofit projects.
For the individual office or conference
room, installation can be streamlined by
using a 2-wire power line dimmer; eliminating the need for additional control wires.
For more advanced systems, such as
daylight harvesting or building automation
applications, standard low voltage devices
(0-10VDC, Class 1 or 2) are used to control
the lighting system. In this daylight
harvesting example, each lighting fixture
(or fixture row) is controlled by it’s own
photosensor; regulating the light output to
connections, and shutting down. When
the problem is corrected, the system
restarts automatically.
4. NEMA Premium Ballast (NPB) program
compliant. The NPB program promotes
the use of high efficiency T8 electronic
ballasts by meeting or exceeding the
Ballast Efficiency Factors, (BEF) established by the CEE, (Consortium for
compensate for changes in natural
daylight. Depending upon the specific
application, energy savings of up to 60%
compared to fixed output T8 electronic
systems can be realized.
Daylight Harvesting Scenario
Fixture
Light Sensor 1 Light Sensor 2 Light Sensor 3
1
Window / Natural Light Source
Electronic T8
Fluorescent Controllable
Lighting Systems
Energy Efficiency). For additional information on this program go to:
www.cee1.org or www.nema.org
Setting the standard for quality, QUICKTRONIC POWERSENSE is covered by our
QUICK 60+®warranty, the first and most
comprehensive lamp & ballast system
warranty in the industry.
All QUICKTRONIC POWERSENSE models
include a line voltage protection circuit,
which protects the ballast in the event
that line voltage is inadvertently applied
to the low voltage control inputs.
Fixture
2
Fixture
3
Desired Illuminance E
Constant setpoint value
r
SPECIFICATION DATA
Black
White
Violet (+)
Grey (-)
Red
Red
Blue
Blue
LAMP 1
ELECTRONIC
BALLAST
Black
White
Violet (+)
Grey (-)
Red
Red
Blue
Blue
LAMP 1
Yel/Blk
Yel lo w
Yel lo w
LAMP 1
ELECTRONIC
BALLAST
LAMP 2
Yel/Blk
Yellow
Yellow
Red/Black
Red/White
Red
Red/White
Blue
LAMP 1
LAMP 3
ELECTRONIC
BALLAST
Black
White
Violet (+)
Grey (-)
LAMP 2
POWERLINE CONTROL
LINE
BLACK
NEUTRAL
WHITE
INSULATE
UNUSED LEADS
VIOLET
(+)
GREY (-)
LOW-VOLTAGE CONTROL
VIOLET (+)
GREY (-)
LINE
BLACK
NEUTRAL
WHITE
0-10V
DC
< 0.5mA
Class 1
or Class2
Catalog # Date Type
Project Prepared by
Comments
T8 POWERSENSE
High Efficiency
®
High Efficiency Electronic T8 Fluorescent Controllable Lighting Systems
Item* Voltage Current Lamp Lumens No. of Factor System Power Efficacy
Number Description* (VAC) (AMPS) Type (lm) Lamps (BF) Lumens (Watts) (lm/W) BEF
50705 QTP 1x32T8/UNV DIM-TC 120-277 0.27/0.12 FO32XP 3000 1 0.88 2640 30 88 2.93
50707 QTP 2x32T8/UNV DIM-TC 120-277 0.54/0.24 FO32XP 3000 2 0.88 5280 59/57 89/93 1.54
50714 QTP 3x32T8/UNV DIM-TCL 120-277 0.73/0.30 FO32XP 3000 3 0.88 7920 87/84 91/94 1.05
50716 QTP 4x32T8/UNV DIM-TCL 120-277 0.96/0.40 FO32XP 3000 4 0.88 10560 114/110 92/96 0.80
Products are all 10-pack. * POWERSENSE T8 replaces former Helios T8 dimming products.
1: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (note: calculation based on lowest wattage value)
Dimensions:
1 & 2 lamp enclosure
Overall: 9.5" L x 1.68" W x 1.0" H (241 x 43 x 25 mm)
Mounting: 8.90" (226 mm)
Weight: 1.1 lbs each (500 g)
3 & 4 lamp enclosure
Overall: 16.7" L x 1.68" W x 1.0" H (425 x 43 x 25 mm)
Mounting:16.2" (411 mm)
Weight: 2.1 lbs each (950 g)
Output Wiring: Lamp wiring for dimming ballasts can differ significantly from non-dimming ballasts and from other manufacturers dimming ballasts.
Take care to connect lamp lead wires as shown on the applicable ballast diagram.
1 lamp 2 lamp
3 lamp
Input & Control Wiring Options:
Input Input Rated Ballast Initial Input System
0.05 150 8
0.05 300 14
0.05 450 20
0.05 600 27
Wiring:
Leads Only
Height
8.70 mm
Slot
4 lamp
Black
White
Violet (+)
Grey (-)
Width
ELECTRONIC
BALLAST
Mounting
Length
Red
Red/White
Red/Black
Red/White
Yellow
Yellow/Black
Yellow
Blue/White
Blue/Black
Blue/White
Blue
Length
LAMP 1
LAMP 2
LAMP 3
LAMP 4
Performance Guide
Data based on SYLVANIA OCTRON®lamps
shown. QUICKTRONIC
ballasts are also compatible with other
1
manufacturers equivalent lamp types that
meet ANSI specifications, including F17,
F25, F32 and the U-Bend equivalent lamps.
Energy saving T8 lamps are not suitable for
dimming applications.
Starting Method: Programmed Rapid Start
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.7
Starting Temp: 50°F/10°C minimum
Input Voltage: 120-277V, ±10%
Input Frequency: 50/60 Hz
THD: <10% @ Full Output
Power Factor: >98% @ Full Output
UL Listed Class P, Type 1 Outdoor
CSA or C/UL Certified
70°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
Remote mounting (Max. wire length from
ballast case to lampholder) up to 8 feet
®
POWERSENSE
Specifications
Data based on F32T8
Control Information
QUICKTRONIC POWERSENSE ballasts are
compatible with a wide range of low voltage
(0-10VDC) and power line fluorescent
controllers available from various manufac-
Please see controls list and
turers.
dimming control wiring examples on page
86 & 87 or contact OSRAM SYLVANIA.
Low Voltage Control Specs: Ballast will source
up to 0.5mA for 0-10VDC control purposes.
May be wired as a Class 1 or Class 2 circuitconsult Local and National Electrical Codes.
Power Line Control Specs: Specificationgrade fluorescent controls are available for
120V or 277V operation of controllable
analog electronic fluorescent ballasts.
Controls must be suitably rated for both the
type (e.g. Fluorescent Phasecontrol) and
size (e.g. 600W) of the connected load.
System Life / Warranty
QUICKTRONIC products are covered by
®
QUICK 60+
ballast system warranty. For additional
details, refer to the QUICK 60+ warranty
bulletin.
, a comprehensive lamp and
®
POWERSENSE
T8 DIM
Item Number 50707 QTP 2 x 32T8 / UNV DIM-TC
QUICKTRONIC PROFESSIONAL
Number of Lamps (1, 2, 3, 4)
Specifications subject to change without notice.
System Type - DIMMING/Case Size
Line Voltage (120-277V)
Primary Lamp Wattage
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
83
Loading...