Sylvania POWERSENSE T5 DIM DATASHEET
www.sylvania.com
QUICKTRONIC®POWERSENSE®T5
Dimming Universal Voltage
High Efficiency Series
Lamp / Ballast Guide
28W T5 - PENTRON
2-lamp QTP2x28T5/UNV DIM
Primary Lamp Type
FP28
T5 DIM
Also operates:
POWERSENSE
FP35, FP21, FP14
®
Key System Features
• Industry’s first ballast that combines
dimming inputs from 0-10V and/or
two-wire AC dimming providing
maximum flexibility
• POWERSENSE compatibility with low
voltage and power line dimmers
• High Efficiency
• Lamp Detection Technology
• Universal voltage (120-277V)
• 100-1% Dimming Range
• PROStart programmed rapid start
• Anti-flash circuitry – turns on in
dimmed mode
• Lightweight and low profile
• Operates at >42kHz
• QUICKSENSE ballast technology
(end-of-lamp-life sensing)
• QUICK 60+ ballast and lamp warranty
Application Information
SYLVANIA QUICKTRONIC
POWERSENSE is ideally suited for:
• Occupancy sensors
• Daylight harvesting
• Energy management
• Load shedding
• Commercial
• Retail
• Hospitality
• Institutional
• Schools
• New construction
• Retrofit
84
SYLVANIA QUICKTRONIC POWERSENSE
ballasts operate linear fluorescent T5 lamps
over a wide (100-1%) dimming range and
provide true versatility in controls selection.
QUICKTRONIC POWERSENSE ballasts
feature micro-controller technology to offer
the industry’s most adaptable dimming
ballast. Compatibility with low voltage
controls, power line dimmers and any line
voltage from 120V to 277V, provides the
flexibility to greatly simplify the specification, purchasing and installation process.
Patented lamp detection technology
delivers unmatched performance.
Variations in brightness from lamp-tolamp are virtually eliminated, providing
uniform lighting throughout the dimming
range. At light levels of >75% unnecessary lamp-coil power is turned off,
delivering energy efficiences comparable
to non-dimming Instant start electronic
ballast. This technology also eases installation and troubleshooting by recognizing
failed lamps, faulty wiring or loose
System Information
QUICKTRONIC POWERSENSE ballasts
operate from standard low voltage
(0-10VDC) fluorescent controllers or
compatible 2-wire power line fluorescent
dimmers, making them ideal for
individual office lighting or automated
building applications, both in new
construction and retrofit projects.
For the individual office or conference
room, installation can be streamlined by
using a 2-wire power line dimmer; eliminating the need for additional control
wires.
For more advanced systems, such as
daylight harvesting or building automation
applications, standard low voltage
devices (0-10VDC, Class 1 or 2) are used
to control the lighting system. In this
daylight harvesting example, each lighting
fixture (or fixture row) is controlled by it’s
own photosensor; regulating the light
connections, and
shutting down. When the
problem is corrected, the system restarts
automatically.
All SYLVANIA Professional Series (QTP)
electronic ballasts feature high power
quality (<10% THD), lightweight, low
profile designs.
output to compensate for changes in
natural daylight. Depending upon the
specific application, energy savings of up
to 60% compared to fixed output
electronic systems can be realized.
Daylight Harvesting Scenario
Fixture
Light Sensor 1 Light Sensor 2 Light Sensor 3
1
Window / Natural Light Source
Electronic T5
Fluorescent Controllable
Lighting Systems
Setting the standard for quality,
QUICKTRONIC POWERSENSE is
covered by our QUICK 60+
the first and most comprehensive
lamp & ballast system warranty in
the industry.
All QUICKTRONIC POWERSENSE models
include a line voltage protection circuit,
which protects the ballast in the event
that line voltage is inadvertently applied
to the low voltage control inputs.
Fixture
2
Desired Illuminance E
Constant setpoint value
Fixture
3
®
warranty,
r
SPECIFICATION DATA
Black
White
Violet (+)
Grey (-)
Red
Red
Blue
Blue
LAMP 1
Yel/Blk
Yellow
Yellow
LAMP 1
ELECTRONIC
BALLAST
LAMP 2
POWERLINE CONTROL
LINE
BLACK
NEUTRAL
WHITE
INSULATE
UNUSED LEADS
VIOLET
(+)
GREY (-)
LOW-VOLTAGE CONTROL
VIOLET (+)
GREY (-)
LINE
BLACK
NEUTRAL
WHITE
0-10V
DC
< 0.5mA
Class 1
or Class2
Catalog # Date Type
Project Prepared by
Comments
T5 POWERSENSE
High Efficiency
®
High Efficiency Electronic T5 Fluorescent Controllable Lighting Systems
Input Input Rated
1,2
Item Voltage Current Lamp Lumens No. of Factor System2Power Efficacy
Number Description (VAC) (AMPS) Type (lm) Lamps (BF) Lumens (Watts) (lm/W) BEF
50726 QTP 2x28T5/UNV DIM-TCL 120-277 0.53/0.23 FP28 2900 2 1.00 5800 64/62 91/93 1.61
0.67/0.29 FP35 3650 2 1.00 7300 81/79 90/92 1.27
0.40/0.18 FP21 2100 2 1.00 4200 49 86 2.04
0.29/0.13 FP14 1350 2 1.00 2700 34 79 2.94
1: Rated lamp lumens and performance data based on PENTRON lamps.
2: At 35°C lamp ambient temperature.
3: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (note: calculation based on lowest wattage value)
Dimensions:
2 lamp enclosure
Overall: 16.7" L x 1.68" W x 1.0" H (425 x 43 x 25 mm)
Mounting:16.2" (411 mm)
Weight: 2.1 lbs each (950 g)
Wiring:
Height
Leads Only
Width
Output Wiring: Lamp wiring for dimming ballasts can differ significantly from non-dimming ballasts and from other manufacturers dimming ballasts.
Take care to connect lamp lead wires as shown on the applicable ballast diagram.
Mounting
Length
2 lamp
2
Ballast
Input2System
0.01 58 10
0.01 73 10
0.01 42 9
0.01 27 8
Length
Performance Guide
Data shown based upon SYLVANIA
®
PENTRON
lamp(s). QUICKTRONIC
POWERSENSE®ballasts are also compatible
3
with other lamp manufacturers equivalent
lamp types that meet ANSI specifications.
Specifications
Data based on FP28
Starting Method: Programmed
Rapid Start
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.7
Starting Temp: 50°F/10°C minimum
Input Voltage: 120-277V, ±10%
Input Frequency: 50/60 Hz
THD: <10% @ Full Output
Power Factor: >98% @ Full Output
UL Listed Class P, Type 1 Outdoor
CSA or C/UL Certified
70°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
No Remote or Tandem Wiring
Control Information
QUICKTRONIC POWERSENSE ballasts are
compatible with a wide range of low
voltage (0-10VDC) and power line
fluorescent controllers available from
various manufacturers.
controls list and dimming control
wiring examples on page 86 & 87
or contact OSRAM SYLVANIA.
Low Voltage Control Specs: Ballast will
source up to 0.5mA for 0-10VDC control
purposes. May be wired as a Class 1 or
Class 2 circuit-consult Local and
National Electrical Codes.
Power Line Control Specs:
Specification-grade fluorescent controls
are available for 120V or 277V operation
of controllable analog electronic
fluorescent ballasts. Controls must
be suitably rated for both the type
(e.g. Fluorescent Phase-control) and size
(e.g. 600W) of the connected load.
Please see
®
POWERSENSE
T5 DIM
Input & Control Wiring Options:
Item Number 50726 QTP 2 x 28T5 / UNV DIM-TCL
QUICKTRONIC PROFESSIONAL
Number of Lamps (2)
Specifications subject to change without notice.
System Type - DIMMING/Case Size
Line Voltage (120-277V)
Primary Lamp Wattage
System Life / Warranty
QUICKTRONIC products are covered
by our QUICK 60+
comprehensive lamp and ballast
system warranty. For additional
details, refer to our QUICK 60+
warranty bulletin.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
®
warranty, a
85
Loading...