Sylvania HELIOS 49674, HELIOS 49671, HELIOS 49673, HELIOS T5HO, HELIOS 49672 User Manual

PROStart ballasts provide optimum starting conditions to provide up to 100,000 switching cycles for use on occupancy sensors and building control systems.

QUICKSENSE ballast technology helps to protect against overheated bases and sockets, as well as cracking of the glass wall, and uses dynamic end-of-lamplife sensing, over the entire dimming range, to avoid false shutdowns caused by some static sensing methods. QUICKSENSE ballast technology will auto-reset when the end-of-life lamps are replaced with new ones.

SYSTEM PHO-DIM comes in a 30 x 30 mm proﬁle, and PENTRON lamps are designed to provide peak performance at 35°C ﬁxture ambient, allowing for smaller and more innovative ﬁxtures.

A complete OSRAM SYLVANIA System Performance Guide showing performance characteristics of lamps and ballasts is available upon request.

Lamp/Ballast Guide

Key System Features

System Information

■ 100–1% Dimming range

■ QUICKSENSE®ballast technology

(end-of-lamp-life sensing)

■ PROStart®programmed start ballast

■ QUICK 60+®warranty

■ 1–10V Control

■ Anti-ﬂash circuitry—turns on in

dimmed mode

■ High luminous efﬁcacy

■ Virtually eliminates lamp ﬂicker

■ High power factor

■ Low harmonic distortion

■ Lightweight

■ UL, CSA, FCC

SYLVANIA QUICKTRONIC PHO-DIM

is ideally suited for:

■ Commercial

■ Retail

■ Hospitality

■ Institutional

■ New Construction

■ Direct Lighting

■ Indirect Lighting

■ Surface Mount

■ Cove Lighting

Application Information

54W T5 – PENTRON®HO

1-lamp QT1x54PHO-DIM 2-lamp QT2x54PHO-DIM

Also operates:

FT55DL, FPC55

SYLVANIA QUICKTRONIC PHO-DIM operates PENTRON

HO, PENTRON HO Circline, and DULUX

L T5 lamps over a wide

(100–1%) dimming range.

SYSTEM PHO-DIM provides nearly twice the light output (188%) of T8 systems, with the same number of lamps, allowing many new design options. One lamp ﬁxtures can now be used in place of two lamp models.

SYSTEM PHO-DIM is appropriate for lighting control for aesthetic reasons as well as lighting management for energy conservation through daylight harvesting or building automation.

Setting the standard for quality, SYSTEM PHO-DIM is also covered by our QUICK 60+ warranty, the ﬁrst and most comprehensive system warranty in the industry.

SYSTEM PHO-DIM is available in one and two lamp models in 120V and 277V to cover a wide range of applications.

QUICKTRONIC®HELIOS™T5 HO Dimming (0-10V)

<10% THD Electronic T5 HO Fluorescent Controllable Lighting Systems

100

Power Input (Watts)

QT2x54PHO-DIM

Light Output (BF)

30110 90 70 50120 100 80 60 40 20

Professional Series

OSRAM SYLVANIA National Customer Service and Sales Center

1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com

Starting Method: Programmed

Start

Circuit Type: Series Lamp Frequency: > 40 KHz Lamp CCF: Less than 1.7 Starting Temp: 50°F minimum Input Frequency: 60 Hz Low THD: < 10% Power Factor: > 98% Voltage Range: +/–10% of

Rated Input

UL Listed Class P, Type 1 Outdoor CSA Certiﬁed 70°C Max Case Temperature FCC 47CFR Part 18 Non-Consumer Class A Sound Rating ANSI C62.41 Cat. A Transient Protection Dynamic End-of-Lamp-Life Sensing Remote Mounting up to 7 feet

.1Data based on PENTRON HO lamp type. See the

SYLVANIA QUICKTRONIC Electronic Ballast Technology and Speciﬁcation Guide (ECS-ELECTRONIC) for other lamp combinations.

Performance Guide

Speciﬁcations

Ordering Guide

System Life / Warranty

<10% THD Electronic T5 HO Fluorescent Dimming Systems

Dimensions:

Overall: 425mm L x 30mm W x 30mm H Mounting: 415 mm

Wiring:

Push-in connectors (no leads provided) Use 18AWG solid copper wire only

Packaging:

Quantity: 20 Weight: 1.0 lbs ea. (approx)

Input Input Rated

2,3

Ballast

Input3System Item Voltage Current Lamp1Lumens No. of Factor System3Wattage Efﬁcacy Number Description (VAC) (AMPS) Type (lm) Lamps (BF) Lumens (W) (lm/W)

49671 QT1x54/120PHO-DIM 120 0.54 FP54T5HO 5000 1 1.00 5000 62 81

0.01 50 8

49672 QT1x54/277PHO-DIM 277 0.23 FP54T5HO 5000 1 1.00 5000 61 82

0.01 50 8

49673 QT2x54/120PHO-DIM 120 1.07 FP54T5HO 5000 2 1.00 10000 120 83

0.01 100 18

49674 QT2x54/277PHO-DIM 277 0.45 FP54T5HO 5000 2 1.00 10000 117 85

0.01 100 18

Also compatible with other manufacturer’s equivalent lamp types that meet ANSI standards.

Rated lamp lumens and performance data based on PENTRON®HO lamps.

At 35°C lamp ambient temperature

Item Number 49673 QT 2 x 54 / 120 PHO-DIM System Type – PHO-DIM

QUICKTRONIC Line Voltage

Number of Lamps (1, 2) Primary Lamp Wattage

Dimming Control

Speciﬁcations

Speciﬁcations subject to change without notice.

QUICKTRONIC products are covered by our QUICK 60+

warranty, a comprehensive lamp and ballast system warranty. For additional details, refer to our QUICK 60+ warranty bulletin.

Dimming Control2: 1-10Vdc two wire control (10V = full output, 1V = minimum output)

Line Voltage Protection:

Ballast goes to 90% if line voltage is inadvertently applied to control leads. Ballast will source up to 0.5mA for control purposes. May be wired as Class 1 or Class 2 circuit.

QUICKTRONIC HELIOS ballasts are compatible with a wide range of 0–10V controllers available from various manufacturers. A list of controls companies is on pages 64-65. (Controls list literature ordering code ECS041.)

LAMP

Black

DIMMABLE BALLAST

L N

White

Violet

Gray

3 4

1-10Vdc control input

Red

Blue Blue

Class 1 or Class 2 Circuit

QUICKTRONIC 2x54PHO-DIM

Black

DIMMABLE BALLAST

LAMP 2

LAMP 1

L N

White

Violet

Gray

1 2 3 4 5 6 7

1-10Vdc control input

Red Red

Blue

Yellow/Wht

Yellow

Class 1 or Class 2 Circuit

–

(0-10V)

PHO-DIM

Normal Ballast Factor

A list of compatible controllers and wiring examples are on pages 64 & 65.

QUICKTRONIC®1x54PHO-DIM