Page 1
62
PROStart ballasts provide optimum
starting conditions to provide up to
100,000 switching cycles for use on
occupancy sensors and building
control systems.
QUICKSENSE ballast technology
helps to protect against overheated bases and sockets, as
well as cracking of the glass wall,
and uses dynamic end-of-lamplife sensing, over the entire
dimming range, to avoid false
shutdowns caused by some static
sensing methods. QUICKSENSE
ballast technology will auto-reset
when the end-of-life lamps are
replaced with new ones.
SYSTEM PHO-DIM comes in a
30 x 30 mm profile, and PENTRON
lamps are designed to provide
peak performance at 35°C fixture
ambient, allowing for smaller and
more innovative fixtures.
A complete OSRAM SYLVANIA
System Performance Guide
showing performance characteristics of lamps and ballasts is
available upon request.
Lamp/Ballast Guide
Key System Features
System Information
■ 100–1% Dimming range
■ QUICKSENSE®ballast technology
(end-of-lamp-life sensing)
■ PROStart®programmed start
ballast
■ QUICK 60+®warranty
■ 1–10V Control
■ Anti-flash circuitry—turns on in
dimmed mode
■ High luminous efficacy
■ Virtually eliminates lamp flicker
■ High power factor
■ Low harmonic distortion
■ Lightweight
■ UL, CSA, FCC
SYLVANIA
QUICKTRONIC PHO-DIM
is ideally suited for:
■ Commercial
■ Retail
■ Hospitality
■ Institutional
■ New Construction
■ Direct Lighting
■ Indirect Lighting
■ Surface Mount
■ Cove Lighting
Application Information
54W T5 – PENTRON®HO
1-lamp QT1x54PHO-DIM
2-lamp QT2x54PHO-DIM
Also operates:
FT55DL, FPC55
SYLVANIA QUICKTRONIC
PHO-DIM operates PENTRON
HO, PENTRON HO Circline, and
DULUX
®
L T5 lamps over a wide
(100–1%) dimming range.
SYSTEM PHO-DIM provides
nearly twice the light output
(188%) of T8 systems, with the
same number of lamps, allowing
many new design options. One
lamp fixtures can now be used
in place of two lamp models.
SYSTEM PHO-DIM is appropriate
for lighting control for aesthetic
reasons as well as lighting
management for energy conservation through daylight harvesting
or building automation.
Setting the standard for quality,
SYSTEM PHO-DIM is also
covered by our QUICK 60+
warranty, the first and most
comprehensive system warranty
in the industry.
SYSTEM PHO-DIM is available in
one and two lamp models in 120V
and 277V to cover a wide range
of applications.
QUICKTRONIC®HELIOS™T5 HO Dimming (0-10V)
<10% THD Electronic T5 HO Fluorescent Controllable Lighting Systems
10
20
40
50
60
70
80
90
100
Power Input (Watts)
QT2x54PHO-DIM
Light Output (BF)
30110 90 70 50120 100 80 60 40 20
30
0
15
Professional Series
Page 2
63
OSRAM SYLVANIA National Customer Service and Sales Center
1-800-LIGHTBULB (1-800-544-4828)
www.sylvania.com
Starting Method: Programmed
Start
Circuit Type: Series
Lamp Frequency: > 40 KHz
Lamp CCF: Less than 1.7
Starting Temp: 50°F minimum
Input Frequency: 60 Hz
Low THD: < 10%
Power Factor: > 98%
Voltage Range: +/–10% of
Rated Input
UL Listed Class P, Type 1 Outdoor
CSA Certified
70°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
Dynamic End-of-Lamp-Life Sensing
Remote Mounting up to 7 feet
.1Data based on PENTRON HO lamp type. See the
SYLVANIA QUICKTRONIC Electronic Ballast Technology
and Specification Guide (ECS-ELECTRONIC) for other
lamp combinations.
Performance Guide
Specifications
1
Ordering Guide
System Life / Warranty
<10% THD Electronic T5 HO Fluorescent Dimming Systems
Dimensions:
Overall: 425mm L x 30mm W x 30mm H
Mounting: 415 mm
Wiring:
Push-in connectors (no leads provided)
Use 18AWG solid copper wire only
Packaging:
Quantity: 20
Weight: 1.0 lbs ea. (approx)
Input Input Rated
2,3
Ballast
3
Input3System
Item Voltage Current Lamp1Lumens No. of Factor System3Wattage Efficacy
Number Description (VAC) (AMPS) Type (lm) Lamps (BF) Lumens (W) (lm/W)
49671 QT1x54/120PHO-DIM 120 0.54 FP54T5HO 5000 1 1.00 5000 62 81
0.01 50 8
49672 QT1x54/277PHO-DIM 277 0.23 FP54T5HO 5000 1 1.00 5000 61 82
0.01 50 8
49673 QT2x54/120PHO-DIM 120 1.07 FP54T5HO 5000 2 1.00 10000 120 83
0.01 100 18
49674 QT2x54/277PHO-DIM 277 0.45 FP54T5HO 5000 2 1.00 10000 117 85
0.01 100 18
1
Also compatible with other manufacturer’s equivalent lamp types that meet ANSI standards.
2
Rated lamp lumens and performance data based on PENTRON®HO lamps.
3
At 35°C lamp ambient temperature
Item Number 49673 QT 2 x 54 / 120 PHO-DIM System Type – PHO-DIM
QUICKTRONIC Line Voltage
Number of Lamps (1, 2) Primary Lamp Wattage
Dimming Control
Specifications
2
Specifications subject to change
without notice.
QUICKTRONIC products are covered by
our QUICK 60+
®
warranty, a comprehensive lamp and ballast system
warranty. For additional details, refer
to our QUICK 60+ warranty bulletin.
Dimming Control2: 1-10Vdc
two wire control (10V = full output,
1V = minimum output)
Line Voltage Protection:
Ballast goes to 90% if line voltage is
inadvertently applied to control leads.
Ballast will source up to 0.5mA for
control purposes. May be wired as
Class 1 or Class 2 circuit.
QUICKTRONIC HELIOS ballasts are
compatible with a wide range of
0–10V controllers available from
various manufacturers. A list of
controls companies is on pages
64-65. (Controls list literature
ordering code ECS041.)
LAMP
Black
DIMMABLE BALLAST
L
N
+
-
White
Violet
Gray
1
2
3
4
1-10Vdc control input
Red
Red
Blue
Blue
Class 1 or Class 2 Circuit
QUICKTRONIC 2x54PHO-DIM
Black
DIMMABLE BALLAST
LAMP 2
LAMP 1
L
N
+
White
Violet
Gray
1
2
3
4
5
6
7
1-10Vdc control input
Red
Red
Blue
Blue
Yellow/Wht
Yellow
Yellow
Class 1 or Class 2 Circuit
–
(0-10V)
PHO-DIM
Normal Ballast Factor
A list of compatible controllers and wiring examples are on pages 64 & 65.
QUICKTRONIC®1x54PHO-DIM
Loading...