Sylvac Fowler Ultra-cal II Operating Instructions Manual

tn

s:::::

.2

-

o

::::J

...

-

tn

e

-

C)

c:

-

as

...

Q)

a.

o

SPECIFICATIONS AND FUNCTIONS

Measuring range:

Resolution:

Accuracy:

Repeatability:

Maximum measuring speed:
Measuring units:
Measuring system:

Display:

Power:

Battery life:
Operating temperature:
Storage temperature:
Influence of humidity:
Data output:
Interface:
Jaws and body:
Weight:

NOTE:

Step

measuring face

depth: 0-6"
step: 0-6"

0-150 mm
0-150 mm

inside: 0-6" 0-150 mm
outside: 0-6" 0-150 mm

.0005" 0.01 mm
.001" 0.03 mm
.0005" 0.01 mm

>

60"/sec. -

>

1.5

m/sec.

inch/metric, switch able (true conversion)
non-contacting linear SYLVAC measuring system (patented)

LCD display, minus sign

"-",5

digits with

.185"/4.7

mm character height, small digit

"5" and "IN" sign for inch measuring unit
one battery, 1.5 V., sylver oxyde (high drain), 190 mAh.

End of battery life warning by flashing display.
12 months of continuous use (reading constantly visible)
0° to+40°

C

- 20° to+70°

C

not important within 0 to 80% of relative humidity
serial
RS 232
hardened and ground stainless steel
145 grams

If the display does not operate correctly (display does not count or it is impossible
to reset to zero), remo e the battery (see page 6), wait 30 seconds and reinsert bat-
tery.

Do not use the digital caliper without its cap (on data output). This cap has to be
removed only in the event of the connection to an interface.

,-- __ Inside measuring jaws

r---

Positive locking screw

Wiper Scale

Zero setting
(zero setting at any position within the measuring range)

'------ INCH/METRIC change over

(true conversion)

Depth
measuring blade

Outside measuring jaws