Sygonix SY-4416210 operation manual

Page 1
App Instruction Manual
SY-RS-201 Smart Wi-Fi Socket with 2 USB Charging Ports
Item No. 2208105
www.conradconnect.com
Page 2
Contents
Introduction
General Information
Conrad Connect Legal Notice
Requirements
Security App to Device Connection
Safety
Mobile App
Getting Started Download and Install the App
App Installation
User Account
Create a User Account Home Page Add Device Overview
Page 3
Settings
Change Device Name
Connect with Amazon Alexa or Google
Assistant
Device Sharing
Remove Device
O󰀪ine Notication
Create Groups
Push Notications
FAQ
Troubleshooting
Page 4
Introduction
The connected device works through a Wi-Fi network together with the “Smart Life - Smart Living” app. This mobile app allows you to control, manage, and receive alerts on devices connected to your network.

General Information

Important Information

Observe information in a red frame to avoid harming yourself or others, and prevent product damage.
Give information in an orange frame special attention.
The blue frame provides tips on product use and features.
Page 5
Conrad Connect
Your product is compatible with the Conrad Connect IoT platform and is powered by Tuya.
Device integration with Conrad Connect requires a Conrad Connect Account.
You can set up an account at the following URL: www.conradconnect.com

Legal Notice

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy,
microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
Page 6

Requirements

Security

It is strongly recommended that you set up your Wi-Fi Router/Wi-Fi Access Point (AP) to use the most secure encryption option it supports.

App to Device Connection

To add a new device to the app, the mobile device that runs the app and the smart device must be connected to the same Wi­Fi network.
You can control the smart device through the app via Wi-Fi or using mobile device data.
Page 7

Safety

Remind yourself of the possible dangers the device you intend to connect can pose to your environment.
Read the instruction manual that came with the product you are going to
connect to the smart device to nd out
if it is suitable to be operated without attendance.
If it is not, then do not use it in conjuction with timer and schedules.
A heater can cause re if left
unattended!
A kettle that contains no water may
cause re!
A coee maker may overheat if not
turned o on time and cause re!
Page 8

Mobile App

Please note that the following instructions may change for future app versions.

Getting Started

First time users should follow these steps:
1. Download and Install the App.
2. Create a User Account.
3. Log In.
4. Add Device.
Page 9

Download and Install the App

App Installation
Apps are available for Android and iOS mobile devices.
Visit the respective app store and search for "Smart Life - Smart Living", or scan the QR code shown here.
Make sure your mobile device satises the
minimum requirements as outlined on the app store download page.
Page 10

User Account

Your account settings are stored in the cloud.

Create a User Account

A user account is required for you to operate the device.
1. Select Register to create an account.
2. Log In.
3. You will then be taken to the "Home Page".
Page 11

Home Page

The home page lists all devices that are under your account's control. When you log in for the
rst time, the device list will be blank.
A1
A2
A14 A13
A12
A3
A11
A10
A9
A8
A4
A5
A6
A7
Swipe down from the top of the screen to
refresh the page.
Page 12
A1 Access to "Home Management" settings,
where you can name a home, set the home location on a map, and assign/add new devices to each room.
A2 Enter a room to view or add devices. A3 View all devices at once. A4 Adds a new device; identical with A14 A5 Return to "Home Page" view A6 Access "Tap-to-Run" and "Automation". A7 Access your prole and settings.
Manage your rooms and assigned
A8
devices.
A9 Remove one or all devices. A10 Switch between list and grid view,
A11 Access submenus, see items A8, A9 and
A10
A12 Displays location information such
as current temperature, humidity, air pressure and wind speed.
A13 Voice control. A14 Adds a new device; identical with A4
Page 13

Add Device

Familiarize yourself with the product before setting it up. Refer to the product operating instructions for further information.
1. Connect your mobile device to a Wi-Fi
network.
2. Add a device by selecting Add Device or
the
3. Select Electrician → Socket (Wi-Fi).
4. Follow the onscreen instructions to
complete the setup process.
icon.
Page 14

Overview

B4
B1
B2
B5
B3 B6
B1 Main socket On/O󰀨 B2 Countdown B3 All sockets and ports On/O󰀨 B4 Settings B5 All USB ports On/O󰀨 B6 Timer
Page 15

Settings

Change Device Name
1. From the "overview" screen select ... > .
2. Enter a new device name.
Connect with Amazon Alexa or Google Assistant
1. From the "overview" select ... .
2. Select an option under "Third-party-
Control".
3. Follow the onscreen instructions to
complete the setup process.
Device Sharing
To share access to a device e.g. with a family member:
1. From the "Overview" screen select
Share Device.
2. Follow the onscreen instructions.
Remove Device
>
The socket must be removed from your device before it can be used with a new account you have not "shared" with. E.g. If giving it to a third party.
From the "overview" select ... > Remove
Device.
Page 16
O󰀪ine Notication
Receive a notication if your device goes o󰀪ine.
From the "overview" select ... > O󰀪ine
Notication > toggle on/o󰀨.
Create Groups
Devices under the same group can be controlled all at once.
1. From the "overview" select ... > Create
Group.
2. Follow the onscreen instructions.
Push Notications
To receive notications, notications should
be enabled in the app and in your mobile
device notication settings.
1. From the "Home Page" view select Me >
Settings > App Notication.
2. Set your notication settings as required.
FAQ
Visit a list of frequently asked questions here:
From the "Overview" select ... > FAQ &
Feedback.
Page 17

Troubleshooting

App cannot connect to device
This may be due to a weak Wi-Fi signal or an interrupted connection.
Check that your internet connection is working correctly. Check cables, routers and connections. Restart network devices if necessary.
Check that the device is within range of your Wi-Fi access point. Use of other 2.4 GHz products e.g. wireless networks and microwave ovens may cause interference.
You may need to set up a wireless repeater to improve the connection.
If the device is battery powered, it may need to have the batteries replaced.
Resetting the device
Resetting a device may help resolve erratic behavior such as connection problems.
1. Insert the included reset pin into the reset
hole.
2. Press down until you feel a “click” then hold
4-5 seconds until you hear an audio prompt.
3. If needed, repeat steps to "Add device".
Loading...