Sygonix SY-3523496 User guide
Operating instructions
RSL wireless remote control
Item no. 1761748
Latest operating instructions
Download the latest operating instructions via the
link www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when the-
re is a potential risk of personal injury, such as electric
shock.
An exclamation mark in a triangle indicates important ins-
tructions in this operating manual that absolutely have to
be observed.
The arrow symbol indicates specic tips and advice on
operation.
Delivery content
• RSL wireless remote control
• Operating instructions
Intended use
Use this product to turn optionally available radio-controlled power
outlets on and off by radio. This product supports radio-controlled
power outlets with dimming function.
It is intended for indoor use only. Do not use it outdoors. Contact with
moisture, e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify
this product. If you use the product for purposes other than those
described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, re, electric shock
etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European
requirements. All company names and product names are trademarks
of their respective owners. All rights reserved.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any
resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight,
strong jolts, high humidity, moisture, ammable gases, vapours and
solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can
no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions
or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• Also observe the safety and operating instructions of any other
devices which are connected to the product.
• Do not use this product in hospitals or medical facilities. Although
the product sends only relatively weak radio signals, the signals
sent may still cause malfunction of life-support systems. The same
may also apply to other areas.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modications and repairs are to be performed
exclusively by an expert or at a qualied shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
b) Batteries
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for
a long period of time to avoid damage through leaking. Leaking or
damaged batteries might cause acid burns when in contact with
skin, therefore use suitable protective gloves to handle corrupted
batteries.
• Batteries must be kept out of reach of children. Do not leave batte-
ries lying around, as there is risk, that children or pets swallow them.
• Batteries must not be dismantled, short-circuited or thrown into
re. Never recharge non-rechargeable batteries. There is a risk of
explosion!
Operating elements
1
1 Indicator lamp
2
2 Control keys
3
3 Switching group selector
4 Battery compartment lid
4
Inserting/replacing battery
1. Remove the battery compartment lid (4) from the back of the
remote control.
2. Insert one round cell battery, type CR2032, into the battery
recess. The positive pole should face upward (see the “+”
imprint on the battery). Push the battery all the way into the
battery recess.
3. Close the battery compartment.
The battery must be replaced when the remote control’s
range decreases noticeably or when the indicator lamp
(1) no longer lights when a button is pushed.
Key functions
• Use the switching group selector (3) to select one of four switching
groups. There are three channels available for each switching
group. The remote control thus has twelve channels in total.
• The control keys (2) are arranged in two columns: left column = ON
/ right column = OFF.
• Use the upper three keys on the left column to activate channels
1 to 3 individually.
• Use the upper three keys on the right column to deactivate channels
1 to 3 individually.
• Use the lower key ALL ON on the left column to activate channels
1 to 3 simultaneously.
• Use the lower key ALL OFF on the right column to deactivate chan-
nels 1 to 3 simultaneously.
The indicator lamp (1) lights up each time a key is
pressed.
Operation
Conguration and the dimming function will depend on your radio-controlled power outlet. You can nd detailed information in the operating
instructions of your radio-controlled power outlet.
The remote control can control an unlimited number of
compatible radio-controlled power outlets.
Care and cleaning
Do not use any aggressive cleaning agents, rubbing
alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
• Never submerge the product in water.
• To clean the product, a dry, soft and clean cloth is sufcient. Do
not apply too much pressure to the housing to prevent scratching.
• Use a longhaired, soft and clean brush and a vacuum cleaner to
easily remove dust.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU
declaration of conformity: www.conrad.com/downloads
Select a language by clicking on a ag symbol and enter
the product order number in the search box. You can then
download the EU declaration of conformity in PDF format.
Disposal
a) Product
Electronic devices are recyclable waste and must not be
disposed of in the household waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
Remove any inserted batteries and dispose of them sepa-
rately from the product.
b) Batteries
You as the end user are required by law (Battery Ordi-
nance) to return all used batteries. Disposing of them in
the household waste is prohibited.
Contaminated batteries are labelled with this symbol to
indicate that disposal in the domestic waste is forbidden.
The designations for the heavy metals involved are: Cd =
Cadmium, Hg = Mercury, Pb = Lead (name on batteries,
e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever batteries are sold.
You thus full your statutory obligations and contribute to the
protection of the environment.
Technical data
Compatible with item no. .......... 640306 / 640453 / 640454 / 640462 /
Battery type ..............................CR2032
Number of channels .................12
Transmission frequency............433.05 - 434.79 MHz
Transmission range ..................max. 30 m (in open area)
Transmission power..................<10 dBm
Operating/storage conditions ....0 to +45 ºC, 10 – 90 % RH
Dimensions (W x H x D) ...........35 x 15 x 95 mm
Weight ......................................30 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microlming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *1761748_V2_0419_02_mxs_m_en
640466 / 640552 / 1761733 /
1761734 / 1761736 / 1761738 /
1761739 / 1761741 / 1761743 /
1761746 / 1761751 / 1762767 /
1762768 / 1762772 / 1762773 /
1762776
Loading...