Sygonix 1557806, 1557807, CP1M, CP1 App Instruction Manual

App Instruction Manual

Smart WiFi switchable
plug-in socket

Item No. 1557806 / CP1M (with metering)
Item No. 1557807 / CP1

www.conradconnect.de

- 2 -

Contents

Conrad Connect .............................................. 3

Symbols ........................................................... 3

App to device communication ......................... 4

Indicator lights on smart device ....................... 4

Core functions ................................................. 5

Installation ....................................................... 6

Deinstallation ................................................... 6

Multiple mobile devices ................................... 6

User account ................................................... 7

App landing page ............................................ 9

App settings ................................................... 10

Software/Firmware updates .......................... 10

Adding a new device ..................................... 12

Device settings .............................................. 13

Overcurrent Protection .................................. 14

Metering......................................................... 15

Control ........................................................... 17

Scenes........................................................... 24

Device Reset ................................................. 26

- 3 -

Conrad Connect

Your product is compatible with the Conrad
Connect IoT platform at

www.conradconnect.de.

You can set up a personal account at the given
URL.

Symbols

The following instructional symbols are used in
this instruction manual.

This triangle indicates important
instructions contained in these
operating instructions that must be
followed.

This symbol indicates that special
advice and notes on operation are
provided.

- 4 -

App to device communication

■ In order to add a new device to the app,
the mobile device that runs the app and the
smart device must connect to your WLAN.

■ Once a new device was added, you can
control the smart device through the app via
WLAN or mobile network.

Indicator lights on smart device

Observe the indicator lights during set up and
use of your smart device.

On/Off

On Device is powered on

Off Device is powered off

Wi-Fi

Flashing
(Fast)

Device not connected to
WLAN

Flashing
(Slowly, 30s)

Authentication failure.
Check WLAN password.

On Device connected to WLAN

4s on/ 0.25s off

No client-server connection
is possible

- 5 -

Core functions

Real-time metering of power
consumption of connected load.

Nr. 1557807 does not support
metering and therefore does not
show any readings for functions
related to metering.

Recording, retrieval and display of
power consumption statistics:

■ Wh (W < 1000), kWh

■ Cost

Turning the smart device on and
off via app over mobile or WLAN
network.

Turn the smart device on or off via
timer.

Controlling on and off times by
schedule rules.

Socket reboot: smart device restarts
a connected router/access point
when the Internet connection fails.

- 6 -

Installation

Apps are available for Android and iOS
mobile devices. Make sure your mobile device

satises the minimum requirements as outlined

on the app page before downloading.

1. Head to the respective app store and
download the app named 'Sygonix Home'
onto your mobile device.

2. Set up a user account as outlined under

User account.

Deinstallation

If you de-install the app from your mobile
device, the settings are not lost and become
available again as soon as you re-install the
app and login with the same account details.

Settings are stored under your 'Sygonix'
account in the cloud. Refer to User account.

Multiple mobile devices

You can install the app on multiple mobile
devices and login with the same account
details to control the same set of smart devices
from different mobile devices.

- 7 -

User account

A 'Sygonix' account is required for you to

operate the smart device.

Your smart device cannot be linked to
two accounts at the same time.

Adding the smart device to a second

account will remove it from the rst

account.
Reset the smart device before linking

to another account.

Setting up a new account

1. Open the app.

2. Press

Sign Up.

3. Enter user name and password, then
conrm with Sign Up.

4. A new account will be set up for you.

Wait until you receive the conrmation for

successful setup.

Logging in

1. Open the app.

2. Press

Login.

- If you have logged in before, the
username and password should appear in

the corresponding elds.

- Tick

Login automatically if you wish
the app to log you in when you start the
app.

3. Conrm with Login.

- 8 -

4. If you login successfully, the landing page
with the device list will appear.

- If no smart devices have yet been set up,
the device list is blank.

Account settings

On the landing page press

to open the

account settings.
Account settings allow you to:

■ Add a prole picture

■ Change the account name

■ Change the account password

■ Log out of your account

After logging out of your current account you
can log in with a different one.

Integrating with Conrad Connect

Note that your 'Sygonix' account is independent
of Conrad Connect.

If you wish to integrate your smart device

with Conrad Connect you require a separate

Conrad Connect account.
Refer to www.conradconnect.de

- 9 -

App landing page

Add new devices

App settings

Account settings

Device list

Turn device on/off

Show Devices Show Scenes

- 10 -

App settings

Press to open app settings:

Language Select app language

Price for
electricity

Select currency
Set the charge for one kWh

Manual

Download operating
instructions

About

See app version and available
app updates.

Links to www.conrad.com and

www.conradconnect.de

Software/Firmware updates

Two types of updates

There are two types of software updates
indicated in the app:

■ App software updates

■ Firmware updates for your smart device

The rmware of your smart device is updated

via the app.

Available rmware updates are indicated in the

app in the device list by

.

- 11 -

For all rmware updates the smart

device and the mobile device that
runs the app must be connected to
the same WLAN network during the
update.

Updating rmware

1. Make sure that mobile device and smart
device are connected to the same WLAN
network.

2. Press

button next to the device you

want to update in the device list.

3. In the rmware section press

.

4. The rmware of the smart device will be
updated.

Updating app software

App software updates are managed as other
apps through the corresponding app store.

- 12 -

Adding a new device

During set-up make sure to keep the
mobile device running the app and the
smart device within receiving distance
of the wireless access point.

1. Connect your mobile device running the app
to your WLAN network.

2. Open the app and navigate to the landing
page.

3. Press +.

4. Select the smart device type you want to
add.

5. Follow the on-screen instructions in the app.

6. When you see the conrmation notication,
the smart device appears in the device list.

7. Add more devices or exit.

It is strongly recommended that you
set up your router or access point
(AP) to use WPA2-Personal with PSK
encryption for authentication.

- 13 -

Device settings

1. Select the smart device from the device list
on the landing page.

2. Press

to open the device settings.

3. Adjust settings:

Icon Select an icon for your device.

Name Give your device a name.

Firmware
version

Indicates the rmware version

of the smart device.

About

MAC address and serial number
of smart device

Reboot

■ In case that your internet
connection becomes
unstable or disconnects,

Reboot allows the smart

device to restart a router that
is connected to the smart
device.

■ Enable/disable with slider

Factory
Setting
Reset

Resets the smart device to its
factory default settings.

Refer to section Device Reset
for more information.

- 14 -

Overcurrent Protection

Activation

If the current of the power plug-in socket
(CP1M only) exceeds the maximum
permissible current (see operating instructions
that came with your device), the overcurrent
protection is triggered and the socket
deactivated.

Reset

To reset the plug-in socket, remove the load
and press the On/Off button on the socket to
re-activate it.

- 15 -

Metering

Real-time wattage

Back to Home

Real-time wattage

Turn device on/off

- 16 -

Energy consumption

Hours/Days/Months switch

Records

Currency

Energy/Cost display

- 17 -

Control

Remind yourself of the possible
dangers the device you intend to
connect can pose to your environment.

Read the instruction manual that came
with the product you are going to

connect to the smart device to nd out

if it is suitable to be operated without
attendance.

If it is not, then do not use it in
conjuction with timer and schedules.

■ A heater can cause re if left

unattended!

■ A kettle that contains no water may

cause re!

■ A coffee maker may overheat if not
turned off on time and cause re!

- 18 -

Timer

Timer turns device on or off

Time settings

Quick time setting

Start/Stop timer

Note:

■ Off : turns the smart device off

■ On : turns the smart device on

- 19 -

Schedule

Rule enabled

Rule disabled

Add new schedule rule

- 20 -

Adding a new schedule rule

Rule turns smart device on or off

Weekdays

Fixed date

Time

1. Press

to start creating a new rule.

2. Decide if the new rule shall turn the device
on or off. Select On–Off accordingly.

3. Set on which weekdays the rule is active.

- If you want the smart device to be

controlled on a specic date, deselect all
weekdays and set a xed date instead.

4. Set the time at which the rule takes effect.

5. Save your rule with Save.

6. Return to the schedule page and enable

and disable rules as required.

7. Study the examples that follow.

- 21 -

Schedule Example 1

A schedule is required that turns a connected

light on at 18:00 and off at 09:00 the following
morning. Schedule shall be active every day.

We need 2 schedules:

Schedule 1

Repeat Mon, Tue, Wed, Thu, Fri, Sat, Sun

Time 18:00

On/Off Set to On

Schedule 2

Repeat Mon, Tue, Wed, Thu, Fri, Sat, Sun

Time 09:00

On/Off Set to Off

- 22 -

Schedule Example 2

A schedule is required that turns a connected

and suitable coffee maker on at 06:00 every
morning, excluding the weekend.

We need 1 schedule:

Schedule 1

Repeat Mon, Tue, Wed, Thu, Fri

Time 06:00

On/Off Set to On

For the above example, you must
ensure that the coffee maker is not left
unattended and is turned off manually

if required.

- 23 -

Schedule Example 3

A schedule is required that turns a connected

and suitable coffee maker on at 06:00 every
morning, excluding the weekend. But, on
Wednesdays on 08:00 instead of 06:00.

We need 2 schedules:

Schedule 1

Repeat Mon, Tue, Thu, Fri

Time 06:00

On/Off Set to On

Schedule 2

Repeat Wed

Time 08:00

On/Off Set to On

For the above example, you must
ensure that the coffee maker is not left
unattended and is turned off manually

if required.

- 24 -

Scenes

A scene is a collection of procedures to be
executed when triggered. Open scenes as
follows:

1. Go to the app landing page.

2. Touch

.

Default scenes

The default scenes are pre-set in the app and
not all default scenes may be compatible with
your smart device.

Congurable Function

Yes

Enable all actions when
you leave home.

Yes

Disable all actions
when you return home.

No

Trigger the emergency
sirene.

No Conrm current alert.

You cannot delete default scenes.

- 25 -

User-dened scenes

1. Touch +.

2. Under the Add New Scene panel, touch the
scene and give the scene a name.

3. Touch + next to Actions of scene.

4. Under the Add New Task panel, select a
device. The available actions of the selected
device are listed. Select an action and touch

Save.

5. Touch

. Set a timer that triggers the

scene and its linked actions after expiry.

6. Touch Save to save the scene.

Execute a scene

In the Scenes panel, touch the scene you want
to execute.

Edit a scene

1. In the Scenes panel, hold down the scene
you want to edit.

2. Select Edit from the pop-up menu.

3. Edit the scene.

4. Touch Save to save the edits.

Delete a user-dened scene

1. In the Scenes panel, hold down the scene
you want to delete.

2. Select Delete from the pop-up menu.

3. Conrm the alert to delete the scene.

- 26 -

Device Reset

Attention! Resetting removes all

conguration data in the smart device.

Option 1

1. Select the device from the device list.

2. Press

.

3. Press

Factory Setting Reset

.

Option 2

1. Navigate to the landing page.

2. Android: Long press on the smart device in
the device list.
iOS: Slide the smart device to the left in the
device list.

3. Select Delete.

4. The device is reset and removed from the
device list.

Option 3

On your smart device, long press the

button
until the On/Off indicator light goes out and
comes on again.

This is a publication by Conrad Electronic SE, Klaus­Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction

by any method, e.g. photocopy, microlming, or the
capture in electronic data processing systems require

the prior written approval by the editor. Reprinting, also
in part, is prohibited. This publication represents the
technical status at the time of printing.

Copyright 2017 by Conrad Electronic SE.

*1557806_P701A_1557807_P701B_v3_1117_02_jh_m_en_1080x1920px_(3)