SY Electronics SY-HDBT-131EC SET User Manual

User Manual

SY-HDBT-131EC SET

4K HDMI to HDBaseT Splitter

1 HDMI In to 3 HDBaseT Outputs and 1 HDMI Output

Audio De-Embedding to Balance and Unbalanced Outputs

4K UHD with PoC & Bi-Directional IR Support

70m @ 1080p

40m @ 4K2K (60Hz 4:2:0)

SY Electronics Ltd., Unit 7 Worrall Street, Salford, Greater Manchester, M5 4TH

Tel: [phone] – Fax: [phone]

Web: sy.co.uk

Introduction

Connections

SY-MUBT-44EC

HDMI Inputs

1

HDMI Outputs

1

HDBaseT Outputs

3

HDBT-EC Receivers

3

IR IN 3 IR IN ALL

1

IR OUT

1

IR LOOP OUT

1

Stereo Balanced Analog Audio

L (+/-) & R (+/-)

Stereo Unbalanced Analog Audio

L & R

The SY-HDBT-131EC Set is a professional 4K HDBaseT Distribution Splitter 3 with HDBaseT outputs and a
local HDMI output. This splitter is supplied with HDBaseT receivers and accessories. Only one PSU is
required as all the receivers are powered over the cat6 (PoC).

The HDMI input is distributed to the local HDMI output and each of the three HDBaseT outputs. The HDBaseT
outputs are designed to function with the SY-HDBT-EC receiver.

The HDBT-131EC can deliver 4K video up to 40m, or 1080p up to 70m and provides power to each receiver
via their own cat6a cable. Good quality cat6/6a cabling is recommended for best performance and sustained
signal quality.

This splitter is HDCP 1.4 and HDCP 2.2 compliant, with intelligent EDID management.

Features

 Handles all resolutions to 4K2K@60Hz 4:2:0 (1080p, 3D, …) in and out
 Transmits 4K2K video for up to 8m via the local HDMI port
 Transmits 4K2K video HDBaseT to 40m or 1080p to 70m, using single cat6 cable
 The HDBaseT Receivers are PoC powered by the HDBaseT splitter
 Supports HDMI1.4, HDCP1.4/2.2, with auto detection
 Support bi-directional IR control
 LED indicators show current video signal status
 EDID management
 Firmware upgrade through Micro USB port

 Easy installation

www.sy.co.uk 2 V1.0

Product Appearance

Name

Description

Power LED

OFF: No power
RED: DC power present

HDMI IN LED

OFF: No power
GREEN: HDMI Input signal is present

HMDI OUT LED

OFF: No power
GREEN: HDMI Output signal is present

EDID Selection Switch

Select between Lo-Res, Default, Hi-Res modes

Service

USB port for service use only

Name

Description

HDMI INPUT

1 x Type A female HDMI input port

HDMI OUTPUT

1 x Type A female HDMI output port

HDBT OUT

3 x RJ45 with status LEDs

IR IN

3 x IR IN: Connect an IR receiver as required. Each IR input is associated
with the corresponding HDBaseT output.

L/R OUT

1 x 3.5 mm stereo jack Unbalanced Stereo de-embedded audio output

BALANCED OUT

Balanced Stereo de-embedded audio output

IR ALL IN / LOOP IN

1 x IR input routed to all HDBaseT outputs

IR OUT

1 x IR OUT: Plug in the IR Emitter and attach to the front of the Source.
This then emits the IR signals received from the HDBaseT Receiver.

IR LOOP OUT

1 x IR LOOP OUT: 3.5mm mini jack for connecting the IR LOOP IN port of
next splitter to achieve IR cascading function.

DC 24V

24V DC power input (2.71A max)

4K HDMI to HDBaseT Splitter

Front Panel

Rear Panel

V1.0 3 www.sy.co.uk