A. In off status,Long press 5-8 seconds to enter into pairing mode with LED
Blue & Red flash alternately.
B. Search and click to connect “ BH-M97” on your phone Bluetooth lists, LED
change to LED Blue flash after connected, now you can play music from phone
to headphone.
C. You can press MFB/ volume+ / volume- on the Bluetooth headset to control
the answer/hang up a call and play/pause of the music, next and previous
songs, volume up and down.
Pairing: In off status,Long press MFB 5-8 seconds to enter into pairing mode with LED
Blue & Red alternately flash.
Connection: Search and click to connect “ BH-M97” on your phone Bluetooth
A. Follow part 3 to connect with first phone, then turn off the Bluetooth
function of first phone.
B. Double press MFB to pairing mode again with Red & Blue LED flash
alternately.
C. Search and click to connect “BH-M97” on your second phone Bluetooth
lists, LED change to Blue LED low flash after connected.
D. Turn on Bluetooth function of first phone, click to reconnect “BH-M97”on
Bluetooth lists. Headset connected with two phones now.
* Music only can be played from one phone under two connections,
when you want to play music from another phone, you need to pause or
close the music of the previous phone. The same operation during
talking status.
Please charge the BH-M97 at once when the Red LED flash. Charging time
about 2 hours. Solid LED Red change to Solid LED Blue when full charged.
Charge Connections
Please connect to the BH-M97 charging port through the Micro USB charging
cable, the charger can be used as car charger, travel charger, computer USB,
etc.
Charging with Charger Charging with PC
Use of charge Base
Please place the BH-M97 on the charging base, then connect the charging
base to USB charger through the Micro USB port for charging .
Charging with Charger Charging with PC
Note:
1. Pls charge the BH-M97 at least one time every 2 moths when don’t use it.
When BH-M97 connected with your mobile phone successfully at the first
time, it will search and reconnect the paired device automatically when power
on, If failed, please pair and connect again.
B. How to Delete paired records?
In Power on state, long press the volume+ and the volume- button for 5
seconds to clear the pairing record. The indicator Blue and Red LED flashes
once at the same time that means the pairing record has been cleared, and
the BH-M97 will not connect back to the connected device. When there are
various connection problem, try clearing the pairing record firstly.
C. What’s the password for pairing?
Some connection devices require password for pairing, pls try 0000 or 8888
or 1111 or 1234.
D. What devices could charge for the headphone?
Any car charger, power bank, PC etc which meet DC 5V , charging current
more than 500mA could be charge for this item.
E. Three-way calling function operation
Call coming during call, short press the MFB to answer the new call and hang
up the current call;
Call coming during the call, double press the MFB to answer the new call and
keep the current call;
Call with a new call coming, long press the MFB for 1 second rejecting a new
call.
When you are on a three-party call, double press the MFB to switch audio
between the current call and the keep call.