Syba Tech SD-PEX10005 User Manual

SD-PEX10005 1

PCIe Parallel Printer

Controller Card

Model: SD-PEX10005

User Manual

Ver. 2.00

Chipset: Moschip MCS9901

SD-PEX10005 2

Product Introduction

This board i s a single-ch ip, PCI Express parallel ca rd th at us es t he la te st PCI
Express interface standard for expansion bus, ena bl in g th is car d to be in sta l led o n
any PCI Express capable PC desktop system. Most new end mothe rboards do not
come equip ped with a parallel port. This card adds the parallel port functionality to
their com puter for conn ecting their parallel devices.

Features

- Compliant with PCI Express Base Specification revision 1.1

- Single-Lane (x1) PCI Express

- IEEE1284 compatible parallel port

- Supports SPP, PS2, EPP, and ECP mode

Package Con tents

- 1 x 1-port Parallel PCI Express Card

- 1 x User Manual

- 1 x Driver CD

- 1 x Low Profile Bracket

SD-PEX10005 3

System Requirements

- Supports Windows® XP/Vista/2000/7/8/Ser ver 200 3/ Server 2008, Linux, Mac
OS/X 10.5, Dos 6.22

Hardware In stallation

1. Turn off the power to your computer

2. Unplug the power cord and remove your c omputers cover

3. Locate an e mpty PCI Express x1, x4, x8, or x16 slot on the motherboard

4. To install, carefull y align the cards bus connector with the selected PCIe slot on
the motherb oard. Push t he board down f irmly.

5. Replace the slot bra cke ts h ol din g scr ew to secur e the c ard

6. Replace the computer cover and reconnect the power cord

Driver Installation

Installing driver for supported Windows OS:

1. Start Windows and inser t the driver CD into the CD-ROM drive.

2. Windows will automa tically detec t the card,.

3. Select Brows e my computer for driver software .

4. Browse to the following folder on the driver CD according to your operating
system:

> Windows 2000:
(CD Drive):\Moschip\MCS9900\Win2K_XP_Server2003\Windows2000