Syba SY-KVM31036 User Manual

SY-KVM31036 1

USB 3.0

KVM Switch

Model: SY-KVM31036

User Manual

Ver. 2.0

SY-KVM31036 2

Product Introduction

The USB 3.0 KVM Switch is a high quality and durable system which allows
control over multiple c omputers/servers from one console. (mouse, keyboard,
monitor, m icr oph o ne, and speaker)

Features

- Controls 3 computers from a single console (keyboard/mouse) over a US B
connection us in g sta n dar d USB cable s.

- Supports 1 MHL (Mobile High-Definition Link) smart phone projected display
via the spec ific Micro USB to HDMI with power charged synchr onization.

- Supports US B keyboard/mouse.

- Compliant with USB specification Revision 3.0 and USB Device Class
Definition for HID Revision 1.11.

- Three computers can share two USB 3.0 downstream ports.

- Supports two types of switching:
a. Push butto n on front panel
b. Hot keys on USB keyboard

- LED display for easy sta tus monitoring.

- Supply Microsoft Intellimouse 3~5 Key Mouse & Micro so ft N atur al Ke y boa r d
Pro series.

- Supports HDMI resolutions up to 1920x1200 @60Hz, full HD 1080p.

- Provides USB 3.0 HUB sw itching in in dependent method or co mbination with
the host switching. (USB HUB Auto-Switch mode)

SY-KVM31036 3

- Provides audio switching in indep endent method or combi nation with t he host
switching (enable/disable by hotkey).

- Auto-scan function (time interval can be adj u ste d betw e en 5-20 seconds when the
auto-scan function is enabled.

- Plug and Play

Package Con tents

- 1 x 4-port USB 3.0 HDMI K VM with USB 3.0 Hub and Audi o and MHL

- 2 x HDMI Cable

- 2 x USB 3.0 Cable

- 2 x 3.5mm audio/micro phone cable

- 1 x External power adapter DC 5V 2A

- 1 x Micro USB to HDMI cable (for MHL function)

- 1 x User Manual

System Requirements

- Supports Windows® 2000/XP/Vista/7/8/2003, Linux, Mac OS9/OSX, SUN
Micro Solar is 8 or later.

- Computer with 1 USB port and 1 HDMI port (if you w ish to share sp eakers
and/or a m icrophone, the computer must also have available audio ports)

- HDMI male-to-male cable per computer

- USB 3.0 cabl e with Type-A end and Type-B end

- 3.5mm spea ker and mic rophone audio cable

SY-KVM31036 4

- One monitor which supports HDMI

- One keyboard/mouse

Note: Wirel ess keyboard/mouse may not work properly with tis KVM swit ch.

- One speaker and microphone with relative cable if necessary

- One USB device to USB downstream port is necessary.

SY-KVM31036 5

Hardware In stallation

1. Connect US B keyboard/mouse to the console front ports of the KVM.

2. Connect all audio cabl es to each computer, KV M, speaker, and micropho ne is
necessary.

3. Connect any other US B device to the USB 3.0 Hub downstream ports if
necessary.

4. Connect the m onitor HDM I cab le to th e moni tor o ut pu t por t of the KV M.

5. Connect the DC 5V power adaptor to the KVM.

6. Connect the HDMI cable between t he HDMI port on the compu ter display card
and the HDMI input port on the KVM.

7. Ensure all USB ports on your system are up-to-date with the latest drivers
available.

8. Connect the USB 3.0 cable Type-A end to the computer and the cable Typ-eB
end to the KVM switch.

9. Turn on the computers.

USB Enumeration

This KVM support USB plug & play. All components can be added and removed
at any time without the nee d to shutdown the unit. However, it will take serveral
seconds to enumerate USB devices. Time consumed depends on the number of
USB devices and the speed of the com puter.