Harsh Environment Connectivity SolutionsHarsh Environment Connectivity Solutions
E Series Male Solder ContactsE Series Male Solder Contacts
The E Series offers a panel mount with quick releaseThe E Series offers a panel mount with quick release
inserts. A small screwdriver can be used to remove theinserts. A small screwdriver can be used to remove the
inserts, allowing for easy gender changes. The maleinserts, allowing for easy gender changes. The male
and female E Series fit into the same panel cut-outs.and female E Series fit into the same panel cut-outs.
ElectricalElectrical
Contact Resistance: 50 milliohms maximum, per pole.
Current Rating: 15A
Insulation Resistance: 2 X 106 M(omega)
Dielectric Resistance: 1,000 V rms
Capacitance: 10 pF
MechanicalMechanical
Insertion/Withdrawal Forces: 7 pounds maximum/5 pounds nominal insertion; 7
pounds maximum/5 pounds nominal withdrawal
Life: 10,000 operations (minimum)
EnvironmentalEnvironmental
Thermal Range: -55° C to +85° C
Humidity: Meets MIL-STD-202F, method 106E
Thermal Shock: Meets MIL-STD-202F, method 107D
Salt Spray: Meets MIL-STD-202F, method 101D
MaterialMaterial
Shells: Die-cast; satin-nickel or Black Velvet
Inserts: Glass-filled thermoplastic
Socket Contacts: Copper alloy, silver- or gold-plated
Pin Contacts: Copper alloy, silver- or gold-plated
Latch Release: Steel, nickel-plated
Insert Locking Cam: Die-cast zinc
TerminalsTerminals
Three terminations are available on E Series receptacles:
1. Straight PC terminals - direct termination to PC board. Housing mounts to panel.
2. Right-angle PC terminals - direct termination to PC board at a right-angle. Housing
mounts to panel.
3. SC - Solder cup
Each character (or absence thereof) in the part numbers listed above denotes one
specific feature.
CharacterCharacter DescriptionDescription
EE Series designator
33 3 pins or contacts
** M -male connector; F -female connector
QGQG Denotes insert only
HH Denotes housing only
BB
Loading...