Swissvoice IP-10 User Manual

Download

Page 1

Swiss Voice IP-10

Telephone User Guide

621-00000121

Page 2

Page 3

VocalData, Inc.

3001 E. President George Bush Highway, Suite 150

Richardson, TX 75082

VocalData has used its best efforts in preparing this manual and the procedures contained in it. However, this manual may include technical or typographical errors despite the publisher's best efforts. Information in this manual is subject to change with these changes to be incorporated in new editions of the manual. VocalData may add features or enhancements to the product described in this manual at any time.

VocalData welcomes comments about this manual. Comments may be sent as email or regular mail.

Email should be sent to techpubs@vocaldata.com

Regular mail should be sent to:

VocalData, Inc., Technical Publications Manager 3001 E. President George Bush Highway, Suite 150 Richardson, TX 75082

VocalData may use or distribute any information you supply in any way it believes appropriate without incurring any obligation to you.

Trademarks and Acknowledgments

The VocalData logo, Voice Over IP Softswitch, VOISS and We Talk Data are trademarks of VocalData.

All products, names and services are trademarks and registered trademarks of their respective companies.

Music: [BG_EASY.WAV, BG_LIGHT.WAV, BG_JAZZ.WAV, IRELAND.WAV, JAPAN.WAV, LITLLITE.WAV, TRANCE.WAV]

Romeo Music International

621-00000121

To order a PDF version of this document use 620-00000121

Page 4

Page 5

1 Your SwissVoice Telephone

Introduction ...................................................................................... 1

Accessing Phone Features........................................................................ 1

In This Manual ........................................................................................... 1

Telephone Description .................................................................... 1

SwissVoice IP 10 Features Table.................................................... 2

Moving Your Telephone .................................................................. 3

2 Basic Phone Features

Adjusting the Volume ...................................................................... 5

Answering a Call .............................................................................. 5

Displaying Line Button Layout ....................................................... 5

Making a Call .................................................................................... 5

…using the Handset .................................................................................. 6

…using the Loudspeaker........................................................................... 6

…using the Keypad ................................................................................... 6

Making a Second Call ...................................................................... 7

Phone Configuration........................................................................ 7

Admin settings Menu ................................................................................. 8

User settings Menu.................................................................................... 8

Alarm ................................................................................................... 8

Date Setting......................................................................................... 8

Display Contrast .................................................................................. 8

Headset Enable/Disable ...................................................................... 9

Idle Display Text .................................................................................. 9

Language............................................................................................. 9

Password............................................................................................. 9

Personal Voice Mail Number ............................................................... 9

Reset ................................................................................................. 10

Page 6

Ringing Tones ................................................................................... 10

Username and Password .............................................................. 11

Using a Headset ............................................................................. 11

Using the Loudspeaker ................................................................. 12

Loudspeaker Troubleshooting................................................................. 12

3 System Telephone Features

Feature Activation Digit................................................................. 13

Abbreviated Dial............................................................................. 13

Creating an Abbreviated Dial Code ......................................................... 13

Using an Abbreviated Dial Code ............................................................. 14

Modifying an Abbreviated Dial Code ....................................................... 14

Deleting an Abbreviated Dial Code ......................................................... 14

Verifying an Abbreviated Dial Number .................................................... 15

Anonymous Call Rejection............................................................ 15

Enabling Anonymous Call Rejection ....................................................... 15

Disabling Anonymous Call Rejection....................................................... 15

Authorization Code Calling ........................................................... 15

Billing Codes .................................................................................. 16

Blind Transfer................................................................................. 16

Call Back Queuing ......................................................................... 16

Call Block (Selective Call Rejection) ............................................ 17

Enabling/Disabling Call Block.................................................................. 17

Blocking Number of Last Call Received .................................................. 17

Adding Numbers to Call Block List .......................................................... 18

Listing Blocked Numbers......................................................................... 18

Deleting Numbers from Call Block........................................................... 18

Call Forward (All Calls).................................................................. 20

Enabling Call Forward (All)...................................................................... 20

…using the Phone ............................................................................. 20

…using Star Codes ........................................................................... 20

Disabling Call Forward (All) ..................................................................... 21

…using the Phone ............................................................................. 21

…using Star Codes ........................................................................... 21

Call Forward (Busy) ....................................................................... 22

Enabling Call Forward (Busy).................................................................. 22

Disabling Call Forward (Busy) ................................................................. 23

Page 7

Call Forward (No Answer) ............................................................. 23

Enabling Call Forward (No Answer) ........................................................ 24

Disabling Call Forward (No Answer) ....................................................... 25

Call Forward (Out of Service)........................................................ 25

Enabling Call Forward (Out of Service)................................................... 25

Disabling Call Forward (Out of Service) .................................................. 26

Call Pickup...................................................................................... 26

Directed Call Pickup ................................................................................ 26

…using the Phone ............................................................................. 26

…using Star Codes ........................................................................... 26

Group Call Pickup.................................................................................... 27

…using the Phone ............................................................................. 27

…using Star Codes ........................................................................... 27

Call Return ...................................................................................... 27

Call Trace ........................................................................................ 27

Call Waiting..................................................................................... 28

Answering the Second Call ..................................................................... 28

Switching Between Held Calls................................................................. 28

Call Waiting with Caller ID............................................................. 28

Call Waiting with ID Manager ........................................................ 28

Caller ID Block................................................................................ 29

Conference ..................................................................................... 29

Conference Call Tips ............................................................................... 29

Dial Tone and Ringer Patterns...................................................... 30

Direct Extension Assignment ....................................................... 30

Programming a Guest Phone .................................................................. 30

Re-establishing the Guest Phone............................................................ 31

Re-establishing Your Old Phone ............................................................. 31

Do Not Disturb................................................................................ 31

Tips for using Do Not Disturb .................................................................. 31

Enabling/Disabling Do Not Disturb .......................................................... 32

…using the Phone ............................................................................. 32

…using Star Codes ........................................................................... 32

Group Speed Dial ........................................................................... 32

Hold ................................................................................................. 32

Hold-on Queuing ............................................................................ 33

Hunt Groups ................................................................................... 33

iii

Page 8

Intercom .......................................................................................... 33

Making an Intercom Call.......................................................................... 33

Receiving an Intercom Call...................................................................... 33

Notes on Intercom Calls .......................................................................... 34

Meet-Me Conference ...................................................................... 34

Joining a Meet-Me Conference ............................................................... 35

To join a Meet-Me Conference .......................................................... 35

Dialing In Too Early........................................................................ 36

Entering an Incorrect ID..................................................................... 36

Extending the Conference Duration .................................................. 36

Roll Call ............................................................................................. 36

Adding More Ports to an Active Meet-Me Conference ...................... 36

Dropping a Conference Call .............................................................. 37

Muting a Conference Call .................................................................. 37

Locking a Conference Call ................................................................ 37

Raising/Lowering Hands in a Conference Call .................................. 38

Scheduling a Meet-Me Conference......................................................... 38

Canceling a Meet-Me Conference........................................................... 39

Modifying a Meet-Me Conference ........................................................... 39

Getting a List of Meet-Me Conferences................................................... 40

MultiCall Park ................................................................................. 41

Parking a Call .......................................................................................... 41

Retrieving a Parked Call.......................................................................... 41

Music on Hold................................................................................. 41

Mute................................................................................................. 41

Night ................................................................................................ 42

On-hook Dialing ............................................................................. 43

One-Touch Transfer....................................................................... 43

Permanent Caller ID Block Release.............................................. 44

Phone Configurator ....................................................................... 44

Assigning Your Phone Number to Your Phone ....................................... 45

IP Address/Phone Number Announcement............................................. 45

Changing the Extension Number............................................................. 45

Unassigning the Extension Number ........................................................ 46

Priority Call ..................................................................................... 46

Enabling/Disabling Priority Call ............................................................... 46

Adding Members to the Priority Call List ................................................. 46

Listing Priority Call Members................................................................... 47

Page 9

Deleting Priority Call Members ................................................................ 47

Privacy Guard................................................................................. 49

Access Codes.......................................................................................... 49

Caller Actions .......................................................................................... 49

Entering an Access Code .................................................................. 50

Recording a Name............................................................................. 50

Answering Privacy Guard Call................................................................. 50

Enabling/Disabling Privacy Guard........................................................... 51

Managing the Access Code..................................................................... 51

Changing the Access Code ............................................................... 51

Listening to Access Code .................................................................. 51

Managing the Selective Caller List .......................................................... 52

Adding to the List............................................................................... 52

Listening to the List............................................................................ 52

Deleting from the List......................................................................... 53

Queue/ACD (Automatic Call Distribution) ................................... 53

Finding Your Queues............................................................................... 54

Logging Into/Out of Queues .................................................................... 54

Answering Calls from Queues ................................................................. 54

Viewing Calls-in-queue Information......................................................... 54

Redial .............................................................................................. 55

…using the Phone ................................................................................... 55

…using Star Codes ................................................................................. 55

Remote Access to Call Forwarding.............................................. 55

Setting or Changing Remote Forwarding ................................................ 55

Canceling Remote Forwarding ................................................................ 55

Remote Phone ................................................................................ 56

Dial-in Setup of Remote Phone ............................................................... 56

Deactivating Dial-up Remote Phone ....................................................... 57

Web Portal Setup of Remote Phone ....................................................... 57

Deactivating Remote Phone via Web Portal ........................................... 58

Selective Call Forward................................................................... 58

Enabling/Disabling Selective Call Forward.............................................. 58

Entering the Forwarding Destination Number ......................................... 59

Identifying the Forwarding Destination Number ...................................... 59

Adding Forwarded Phone Numbers ........................................................ 59

Listing Forwarded Phone Numbers ......................................................... 59

Deleting Forwarded Phone Numbers ...................................................... 60

Speaker ........................................................................................... 61

Page 10

Speed Dial....................................................................................... 61

Programming a Speed Dial Button .......................................................... 61

Using a Speed Dial Button ...................................................................... 61

Identifying the Number Assigned to a Speed Dial Button........................ 61

Modifying a Speed Dial Number.............................................................. 62

Deleting a Speed Dial Number ................................................................ 62

Star Codes ...................................................................................... 62

4 Voice Mail Features (Default Menu)

Menus and Commands.................................................................. 65

Accessing Your Voice Mail ........................................................... 68

…from your phone................................................................................... 68

…from any other internal phone.............................................................. 69

…from any outside touchtone phone....................................................... 69

Dialing Main Number ......................................................................... 69

Dialing Your Telephone ..................................................................... 70

…from the email program on your PC..................................................... 70

Using Controls While Playing Messages..................................... 71

Rewind/Fast Forward .............................................................................. 71

Rewind to the Beginning of a Message................................................... 71

Fast Forward to the End of a Message ................................................... 71

Pause Play of a Message........................................................................ 71

Composing Messages before Sending ........................................ 71

Compose and Send a Message .............................................................. 71

Marking a Message as Urgent....................................................... 72

Changing Your Password ............................................................. 73

Returning to the Auto Attendant or Operator.............................. 73

Zeroing Out to a Custom Operator............................................... 73

Replaying a Message..................................................................... 74

Saving a Message .......................................................................... 74

Skipping to the Next Message ...................................................... 74

Deleting a Message........................................................................ 75

Forwarding a Message to Another Mailbox................................. 75

Replying to a Message .................................................................. 75

Dialing Back a Caller...................................................................... 76

Sending a Message Directly to an Extension.............................. 76

Page 11

Personal Greetings ........................................................................ 76

Recording Personalized Mailbox Greetings ............................................ 77

Listening to Your Greetings ..................................................................... 78

Receiving Pager Notification ........................................................ 78

What You Receive on Your Pager/Cell Phone ........................................ 78

Managing Distribution Groups ..................................................... 79

Creating a New Group............................................................................. 79

Editing or Modifying a Group................................................................... 80

Listing All Group Members ................................................................ 80

Adding a Member to the Group ......................................................... 81

Deleting a Group Member ................................................................. 81

Playing the Group Name ................................................................... 81

Changing the Group Name................................................................ 81

Deleting a Group ..................................................................................... 82

Listening to a List of Distribution Groups:................................................ 82

Exiting the Voice Mail System ...................................................... 83

5 Voice Mail Features (Option A Menu)

Menus and Commands.................................................................. 85

Accessing Your Voice Mail ........................................................... 88

…from your phone................................................................................... 88

…from any other internal phone.............................................................. 89

…from any outside touchtone phone....................................................... 89

Dialing Main Number ......................................................................... 89

Dialing Your Telephone ..................................................................... 89

…from the email program on your PC..................................................... 90

Using Controls While Playing Messages..................................... 90

Rewind/Fast Forward .............................................................................. 91

Rewind to the Beginning of a Message................................................... 91

Fast Forward to the End of a Message ................................................... 91

Pause Play of a Message........................................................................ 91

Composing Messages before Sending ........................................ 91

Compose and Send a Message .............................................................. 91

Marking a Message as Urgent....................................................... 92

Changing Your Password ............................................................. 92

Skipping the Mail Menu to Hear Messages.................................. 93

Returning to the Auto Attendant or Operator.............................. 93

vii

Page 12

Zeroing Out to a Custom Operator............................................... 93

Replaying a Message..................................................................... 94

Saving a Message .......................................................................... 94

Skipping to the Next Message ...................................................... 94

Deleting a Message........................................................................ 95

Forwarding a Message to Another Mailbox................................. 95

Replying to a Message .................................................................. 95

Dialing Back a Caller...................................................................... 96

Sending a Message Directly to an Extension.............................. 96

Personal Greetings ........................................................................ 96

Recording Personalized Mailbox Greetings ............................................ 97

Listening to Your Greetings ..................................................................... 97

Receiving Pager Notification ........................................................ 97

What You Receive on Your Pager/Cell Phone ........................................ 98

Managing Distribution Groups ..................................................... 98

Creating a New Group............................................................................. 99

Editing or Modifying a Group................................................................... 99

Listing All Group Members .............................................................. 100

Adding a Member to the Group ....................................................... 100

Deleting a Group Member ............................................................... 100

Playing the Group Name ................................................................. 101

Changing the Group Name.............................................................. 101

Deleting a Group ................................................................................... 101

Listening to a List of Distribution Groups:.............................................. 102

viii

Exiting the Voice Mail System .................................................... 102

6 Voice Mail Features (Option B Menu)

Menus and Commands................................................................ 103

Accessing Your Voice Mail ......................................................... 106

…from your phone................................................................................. 106

…from any other internal phone............................................................ 106

…from any outside touchtone phone..................................................... 107

Dialing Main Number ....................................................................... 107

Dialing Your Telephone ................................................................... 107

…from the email program on your PC................................................... 108

Using Controls While Playing Messages................................... 108

Rewind/Fast Forward ............................................................................ 108

Page 13

Rewind to the Beginning of a Message................................................. 109

Fast Forward to the End of a Message ................................................. 109

Pause Play of a Message...................................................................... 109

Composing Messages before Sending ...................................... 109

Compose and Send a Message ............................................................ 109

Marking a Message as Urgent..................................................... 110

Changing Your Password ........................................................... 110

Skipping the Mail Menu to Hear Messages................................ 111

Returning to the Auto Attendant or Operator............................ 111

Zeroing Out to a Custom Operator............................................. 111

Replaying a Message................................................................... 112

Saving a Message ........................................................................ 112

Skipping to the Next Message .................................................... 112

Deleting a Message...................................................................... 112

Forwarding a Message to Another Mailbox............................... 112

Replying to a Message ................................................................ 113

Dialing Back a Caller.................................................................... 113

Sending a Message Directly to an Extension............................ 114

Personal Greetings ...................................................................... 114

Recording Personalized Mailbox Greetings .......................................... 114

Listening to Your Greetings ................................................................... 115

Receiving Pager Notification ...................................................... 116

What You Receive on Your Pager/Cell Phone ...................................... 116

Managing Distribution Groups ................................................... 117

Creating a New Group........................................................................... 117

Editing or Modifying a Group................................................................. 118

Listing All Group Members .............................................................. 118

Adding a Member to the Group ....................................................... 118

Deleting a Group Member ............................................................... 119

Playing the Group Name ................................................................. 119

Changing the Group Name.............................................................. 119

Deleting a Group ................................................................................... 120

Listening to a List of Distribution Groups:.............................................. 120

Exiting the Voice Mail System .................................................... 120

Page 14

7 Set Up Outlook for TAPI

Using TAPI to Call from Outlook ................................................ 121

Installing the TAPI Support Software......................................... 123

Configuring Windows for TAPI ................................................... 129

Configuring Outlook to Use TAPI ............................................... 137

Index ................................................................................ I-1

Page 15

Chapter 1 Your SwissVoice Telephone

Introduction

This guide describes how to use all of the features that are provided by your VocalData telephone system on your SwissVoice IP 10 telephone.

Accessing Phone Features

Some features require you to dial an activating digit followed by a numeric code. The default value for this activating digit is 5 and it is used throughout this guide. However, your system administrator may choose to use another digit for this function. In that case, substitute your activating digit for the default. All feature operation will be exactly the same.

In This Manual

• Chapter 1 discusses the telephone hardware

• Chapter 2 contains an alphabetical summary of each telephone feature

• Chapter 3 contains an alphabetical summary of the VocalData telephone

features

• Chapter 4 discusses voice mail features (default menu).

• Chapter 5 discusses voice mail features (Option A menu).

• Chapter 6 discusses voice mail features (Option B menu).

• Chapter 7 discusses setting up Outlook for TAPI.

Telephone Description

The SwissVoice phone is a full-featured telephone that provides voice communication over an IP network. The phone functions much like a traditional analog phone, allowing you to place and receive telephone calls. The phone also supports features such as call forwarding, redialing, speed dialing, transferring calls, conference calls, and accessing voice mail. The SwissVoice telephone has several key components, which are shown in the following figure.

Swiss Voice Telephone User Guide Your SwissVoice Telephone 1 621-00000121

Page 16

OK - Menu access in standby, sets options, service, call

C - Clear, exits to menu or to standby display (long click)

Volum e Up

Speaker

Volum e Down

Mute (Press and hold)

Figure 1: SwissVoice IP 10

SwissVoice IP 10 Features Table

Features Descriptions

Confirmation In standby mode, when pressed for more

than 3 seconds, enables access to the phone menus. When pressed for less than 3 seconds in standby mode, this key allows the phone number to be reassigned (see “Phone Configurator” on page 44). If in an active call, this key sets an option, a service or a call.

}

Services (short click) or Memory keys (long click)

When no active call, shows most recently called numbers

Scrolls through Directory

Programmable Function Keys

Clear Exits to higher-level menu (short click) or to

standby display (long click). When entering a phone number, Clear deletes the last character in editing mode. Hold down to delete all entered characters.

Phone Book This feature is not available on the

VocalData system.

ServiceS Offers a list of available services (short

click) or gives access to Memory keys menu (long click).

Upper/Lower case When entering names in the Phone Book,

the pound (#) key can be used to switch between upper and lower case character input.

2 Your SwissVoice Telephone Swiss Voice Telephone User Guide

621-00000121

Page 17

Features Descriptions

Scrolling keys Enable browsing through menus and setting

options.

In standby mode, shows the most recently called numbers.

Scrolls in the phone books.

Loudspeaker Activates loudspeaker and hands-free

functions.

Volume Keys Increase or decrease volume for the

handset.

Dial pad Is used to key in numbers and letters.

Pressing and holding one key calls the preprogrammed number or function.

F1- F4 Function Keys Programmable backlighted keys used for

voice mail (F4) and line appearances (F1- F3). These keys are accompanied by labels that indicate the key functions. If you press and hold any of these keys for more than 2 seconds, the LCD will show the layout of the four keys. Press OK to reset the display.

Mute

Mute When pressed for more than 2 seconds,

Moving Your Telephone

Before moving your telephone, you should check with your system administrator to make sure that there is power for the telephone at the new location. You need a power adapter for your phone at the new location as well.

To move your phone, follow these steps:

1. Unplug the telephone from the LAN connection jack and the power adapter from the wall.

2. Take the telephone to the new location.

3. Plug the telephone into the LAN connection jack and the power adapter into a

wall outlet.

4. Watch to ensure that the phone registers and boots up properly. If it does not, contact your system administrator.

mutes the call so that the called party cannot hear you speak. You will still be able to hear the called party.

Swiss Voice Telephone User Guide Your SwissVoice Telephone 3 621-00000121

Page 18

4 Your SwissVoice Telephone Swiss Voice Telephone User Guide

621-00000121

Page 19

Chapter 2 Basic Phone Features

Adjusting the Volume

You can adjust the ringer volume while the phone is ringing by pressing the volume up or down keys.

The loudspeaker volume or handset volume can be adjusted during a conversation by pressing the volume up or down keys.

Answering a Call

When a call is received on your phone, the display will show the Caller ID number and name of the caller, if it is available.

Lift the handset or

Press the Loudspeaker key.

NOTE:

See “Using a Headset” on page 11.

To answer using a headset, you must first enable the headset feature.

Displaying Line Button Layout

The four function keys on the right side of the phone labeled F1 - F4 are programmable feature keys. If you press and hold any of these keys for more than 2 seconds, the LCD will show the layout of the four line keys. Press OK to reset the display to the normal state.

Making a Call

Several options exist for you to make a call from your telephone. You may use any of the following options: the handset (traditional), the loudspeaker, or the keypad (direct dialing). See also the Intercom feature, described on page 33.

NOTE:

backspace over mistakes and retype the number. If you press and hold the Clear key, it deletes all of the input.

When entering a number, you can press the Clear key to

Swiss Voice Telephone User Guide Basic Phone Features 5 621-00000121

Page 20

…using the Handset

1. Lift the handset. The first available line is selected. If desired, press a Line key (F1-F3 by default) to select a different line.

2. If you have speed dial numbers set up, press to access the desired speed dial number. Press OK to dial.

NOTE: Refer to “Speed Dial” on page 61.

3. For an internal call, dial the extension of the party you wish to call.

4. For an external call:

• Press 9 (or the digit that is required to access an outside line on your

specific system).

• For long distance, dial 1 before dialing the number.

5. To end the call, press the Line key that is lit or press Loudspeaker key

again.

…using the Loudspeaker

1. Press the Loudspeaker key .

The first available line is automatically selected and you will hear a dial tone over the loudspeaker.

2. If you have speed dial numbers set up, press to access the desired speed dial number. Press OK to dial.

NOTE: Refer to “Speed Dial” on page 61.

3. For an internal call, dial the extension of the party you wish to call.

4. For an external call:

• Press 9 (or the digit that is required to access an outside line on your

specific system).

• For long distance, dial 1 before dialing the number.

5. To end the call, press the Line key that is lit or press Loudspeaker key

again.

…using the Keypad

1. Do one of the following:

• For speed dial numbers, press to access the desired speed dial

number.

NOTE: Refer to “Speed Dial” on page 61.

• For an internal call, dial the extension.

6 Basic Phone Features Swiss Voice Telephone User Guide

621-00000121

Page 21

• For an external call, press 9 (or the digit that is required to access an

outside line) and dial the number.

NOTE:

tone over the loudspeaker. Remember for long distance calls to dial a 1 before dialing the number.

2. Press OK to dial.

3. To end the call, press the Line key that is lit or press Loudspeaker button .

The first available line is automatically selected and you will hear a dial

Making a Second Call

You can start a new call while still in an active call, by pressing an unlit Line key (F1-F3 by default). This will put the first call on hold automatically (red/blinking), and you will hear a dial tone. You can then dial the number to make the new call.

To pick up the first call again, either:

• press the red blinking Line key twice

• or press the red blinking Line key and press the Resume soft key.

• If the second call is still active, it is automatically put on hold and will be

red/blinking.

To end the current call, press the green backlit Line key.

Phone Configuration

The SwissVoice telephone has extensive menus that allow user and administrative configuration.

To access the user configuration menus:

NOTE:

receiver on the hook. Lifting the receiver while configuring the phone will stop the configuration process.

While configuring the user settings, it is advisable for you to keep the

Press and hold the OK key for 3 seconds to enter the main menu.

Press the Navigation key to scroll to the desired sub-menu.

Press the Clear key to return to the previous menu. Press and hold the Clear key to exit the menu system. The phone will exit the menu system after 3 seconds of no action.

Swiss Voice Telephone User Guide Basic Phone Features 7 621-00000121

Page 22

Admin settings Menu

This menu shows the configuration of the phone as set up by your administrator. These settings cannot be changed from the phone, but they can be viewed at any time. The information shown under this sub-menu includes the phone’s MAC address, IP address, Call Agent IP address and other information.

User settings Menu

This sub-menu lets you choose the setting options for ringing tones, display language, display idel screen, heaset enable/disable, clock alarm, voice mail number, password, and reset to factory defaults.

Alarm

The Alarm feature is not supported by the VocalData system.

Date Setting

The SwissVoice phone displays the date in the format dd/mm/yy by default. You can modify this format to display the date in mm/dd/yy or yy/mm/dd format.

You can also reset the date on the phone. However, the date and time are set by the VocalData system. If you change the date (or time) to other than what is current, it will be reset to the current date and time whenever the phone registers with the Call Agent.

To change the display:

1. Press and hold the OK key for 3 seconds to enter the main menu.

2. Press the scroll key to select the User settings menu and press OK to

select.

3. Scroll to Clock and press OK.

4. Scroll to select Date setting and press OK.

5. Scroll to select Date format and press OK.

6. Scroll to select the desired date format. Press OK to confirm your choice.

7. Press and hold the Clear key to exit.

Display Contrast

To change the display contrast of the LCD on the phone:

1. Press and hold the OK key for 3 seconds to enter the main menu.

2. Press the scroll key to select the User settings menu and press OK to

select.

3. Scroll to Display and press OK.

8 Basic Phone Features Swiss Voice Telephone User Guide

621-00000121

Page 23

4. Scroll to select Contrast and press OK.

5. Press the scroll keys up or down to adjust the contrast. Press OK to confirm

your choice.

6. Press and hold the Clear key to exit.

Headset Enable/Disable

To enable (or disable) the use of a headset:

1. Press and hold the OK key for 3 seconds to enter the main menu.

2. Press the scroll key to select the User settings menu and press OK to

select.

3. Scroll to Headset and press OK.

4. Scroll to select On to enable or Off to disable and press OK.

5. Press and hold the Clear key to exit.

Idle Display Text

This feature is not supported on VocalData phones.

Language

You can choose from 5 display languages for the system menus: English, French, German, Italian, or Spanish. If the display is already in a foreign language, look for a word beginning with “*”.

NOTE:

displayed by the VocalData system. The service provider controls the system language for the phone.

1. Press and hold the OK key for 3 seconds to enter the main menu.

2. Press the scroll key to select the User settings menu and press OK to

select.

3. Scroll to *Language and press OK.

4. Scroll to select the desired language and press OK.

5. Press and hold the Clear key to exit.

Changing the language does not affect the messages and information

Password

This feature is not supported on VocalData phones.

Personal Voice Mail Number

You can save a personal voice mail number, which will be used when the network voice mail is not set or is unavailable.

Swiss Voice Telephone User Guide Basic Phone Features 9 621-00000121

Page 24

1. Press and hold the OK key for 3 seconds to enter the main menu.

2. Press the scroll key to select the User settings menu and press OK to

select.

3. Scroll to Other settings and press OK.

4. Enter a voice mail number and press OK.

5. Press and hold the Clear key to exit.

Reset

This feature is not supported on VocalData phones.

Ringing Tones

You can set the ringing tones on your phone for internal or external calls. There are three features that can be set:

• Melody - sets the melody that will be played.

• Volume - sets the volume of the ring.

• Rhythm - sets the frequency of the rhythm of the ring tone.

The Melody and Rhythm selected can be applied to internal or external calls so that you can tell what type of call is incoming when the phone rings. To set the ringing features:

1. Press the OK key for 3 seconds.

2. Select the Ringing tones menu and click OK.

3. Use the scroll key to select the option you want to modify and click OK.

If you select Melody:

a. Select Internal or External for the type of call that the ring will apply to

and click OK.

b. Scroll up and down through the ring tones. Each ring tone will play as it is

highlighted.

c. When you hear one you like, press OK to select it.

If you select Volume :

a. Use the scroll keys to change the volume of the ring tone.

b. Press OK to set it.

If you select Rhythm:

a. Select Internal or External for the type of call that the ring will apply to

and click OK.

b. Use the scroll keys to change the speed of the rhythm that is used (slow

to fast).

c. When you hear one you like, press OK to select it.

10 Basic Phone Features Swiss Voice Telephone User Guide

621-00000121

Page 25

4. Press and hold the Clear key to exit.

Username and Password

Your SwissVoice phone has a web site that you can access to modify the configuration of your phone. The web site is accessed using a default username (“user”) and password (“user”). It would be wise for you to log into the web site and modify your username and password so that others cannot access and modify your phone’s configuration.

To access your phone’s configuration web site:

1. On your SwissVoice phone, press and hold the OK key to access the menu.

2. Scroll to highlight the Admin Settings and press OK.

3. Highlight Current Settings and press OK.

4. Scroll to view the IP Address and write it down.

5. Open a web browser on your computer, and enter the IP address of your

phone.

6. When the SwissVoice web site comes up, click on the User button at the bottom of the page.

7. Click the User Access link on the left.

8. Enter a New User Login and click Submit.

9. Enter a New Password twice and and click Submit.

The next time you log into the web site, use the new user name and password you just configured.

Using a Headset

To use a headset to answer or make calls, you must enable the feature through the user settings menu on the phone.

To enable (or disable) the use of a headset:

1. Press and hold the OK key for 3 seconds to enter the main menu.

2. Press the scroll key to select the User settings menu and press OK to

select.

3. Scroll to Headset and press OK.

4. Scroll to select On to enable or Off to disable and press OK.

5. Press and hold the Clear key to exit.

To make a call using the headset:

1. Ensure the headset is plugged into the phone and enabled.

Swiss Voice Telephone User Guide Basic Phone Features 11 621-00000121

Page 26

2. Press the Loudspeaker key to answer.

3. Press the Loudspeaker key again to disconnect.

Using the Loudspeaker

Your telephone contains a loudspeaker that lets you converse “hands free” without having to use the handset. A loudspeaker also allows others in the room to listen and participate in a telephone conversation.

When your phone rings, to turn on the loudspeaker and answer the call (without lifting the handset) do one of the following:

• Press the green backlit line key.

• Press the Loudspeaker key .

• Press the Answer soft key.

• Press the NewCall soft key (if you are already on a call).

To activate or deactivate the loudspeaker anytime during a call, press the Loudspeaker key or the lit Line key. When the speaker is active, the handset becomes inactive, and vice versa.

When the loudspeaker is on, press the Vol u me keys to adjust the loudspeaker volume.

You can pick-up the handset at any time and continue the conversation more privately. Picking-up the handset turns off the speaker. If you leave the handset off hook, you can switch back and forth between the handset and loudspeaker by pressing the Loudspeaker key .

Loudspeaker Troubleshooting

Problem Solution

You can’t hear callers on the speaker.

Callers can’t hear you when you use the loudspeaker.

Increase the speaker volume.

Make sure nothing is blocking the microphone, which is located on the left side of the telephone under the handset cradle.

Move closer to the microphone and face the microphone when speaking.

Check the LCD to make sure your call is not muted.

The caller’s voice echoes. Decrease the speaker volume.

12 Basic Phone Features Swiss Voice Telephone User Guide

621-00000121

Page 27

Chapter 3 System Telephone Features

This chapter contains an alphabetical summary of all features that may be provided on your telephone. You will only be able to use those features that have been configured on to your telephone by the system administrator.

NOTE:

provider. It is possible that some system features are not configured on your phone. If you do not have a feature listed in this chapter and would like to have it on your phone, contact your system administrator for help.

Each user’s phone features are configured by the phone service

Feature Activation Digit

Some features require you to dial an activating digit followed by a numeric code (example: 588). The default value for this activating digit is 5 and it is used throughout this document. However, your system administrator may choose to use another digit for this function. In that case, substitute your activating digit for the default. Operation of all features will be exactly the same.

NOTE:

default values for your phone system at the time of installation. They may be changed by your system administrator. Any list of feature codes given to you by your system administrator should be used in place of the codes listed here.

The feature codes (“star codes”) listed in these procedures are the

Abbreviated Dial

This feature lets a you create, modify, delete, verify and use a personal list of up to 100 Abbreviated Dial codes. Abbreviated Dial codes must be entered as two digits when programming and dialing (Example: enter 04 instead of 4).

Creating an Abbreviated Dial Code

1. Press 75# followed by OK button.

NOTE:

2. Press 1 to program (set) the Abbreviated Dial code.

3. Press the digits (00-99) you wish to use as the Abbreviated Dial code or enter * to exit.

Swiss Voice Telephone User Guide System Telephone Features 13 621-00000121

A voice prompt will lead you through the remaining steps.

Page 28

4. Dial the phone number you want to assign to this Abbreviated Dial code, followed by #.

The phone number you entered for this Abbreviated Dial number is repeated back.

NOTE:

includes the area code for long distance calls and may include the area code for local calls in some areas.

5. Press # to save or * to exit without saving.

6. Program or verify another Abbreviated Dial code or hang up to exit.

Be sure to enter all the numbers normally required to dial the call. This

Using an Abbreviated Dial Code

1. Press *3 followed by OK button.

2. Dial the desired Abbreviated Dial code (00-99).

3. Wait for the called party to answer.

Modifying an Abbreviated Dial Code

1. Press 75# followed by OK button.

NOTE:

2. Press 1 to program (set) the Abbreviated Dial code (00-99).

3. Press the digits of the Abbreviated Dial code to modify followed by # or press

* to exit.

A voice prompt will lead you through the remaining steps.

4. Dial the phone number you want to assign to this Abbreviated Dial code followed by the # sign, or press * to cancel.

The phone number you entered for this Abbreviated Dial number is repeated back.

NOTE:

includes the area code for long distance calls and may include the area code for local calls in some areas.

5. Press # to save the changes or * to exit without saving.

6. Program or verify another Abbreviated Dial code or hang up to exit.

Be sure to enter all the numbers normally required to dial the call. This

Deleting an Abbreviated Dial Code

1. Press 75# followed by OK button.

NOTE:

2. Press 1 to program (set) the Abbreviated Dial code (00-99).

A voice prompt will lead you through the remaining steps.

14 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 29

3. Press the digits of the Abbreviated Dial code to delete followed by the # sign.

A confirmation message tells you: “No number was entered.”

4. Program or verify another Abbreviated Dial code or hang up to exit.

Verifying an Abbreviated Dial Number

1. Press 75# followed by OK button.

2. Press 2 to verify (check) an Abbreviated Dial code (00-99).

3. Press the Abbreviated Dial code you wish to verify.

The phone number you entered for this Abbreviated Dial number is repeated back.

4. Program or verify another Abbreviated Dial code or hang up to exit.

Anonymous Call Rejection

When enabled, this feature rejects calls from callers who block the display of their caller ID information.

Enabling Anonymous Call Rejection

1. Press *77 followed by OK button.

2. Hang up.

On the next incoming call, the calling party gets a message that the party they are calling does not accept anonymous calls.

Disabling Anonymous Call Rejection

1. Press *87 followed by OK button.

2. Hang up.

Authorization Code Calling

This feature is available system-wide to allow/deny long distance dialing and does not appear as a button on your telephone.

If you are required to enter an authorization code for a call, follow these steps:

1. Access an outside line.

2. Press the # sign.

3. Enter the authorization code (obtained from your system administrator). When

the correct code is entered, you hear dial tone.

Swiss Voice Telephone User Guide System Telephone Features 15 621-00000121

Page 30

4. Enter the desired number you want to call.

Billing Codes

This feature, if enabled by your service provider, lets you assign a project or client code to any call. The code is recorded in the Call Data Record (CDR) file. Contact your system administrator to retrieve the billing records from the CDR file.

After you dial the number (or during a call), follow these steps:

1. Press the Billing key (as configured by the system administrator).

2. Enter the associated billing code for the call.

3. Re-press the Billing button.

Blind Transfer

Use this feature to transfer a call to another number without having to announce it. See also “One-Touch Transfer” on page 43 and “Transfer” on page 63.

1. Tell the calling party you will transfer the call.

2. Press the scroll key to select the Trnsfr softkey and press OK to select.

3. Dial the number to which you want to transfer the call.

4. Hang up.

Call Back Queuing

This feature instructs the VoIP system to call you when a previously unavailable outgoing line becomes available. (See also “Hold-on Queuing” on page 33.)

When you try to make an external call and all outgoing lines are unavailable, you will hear a recorded announcement. When you hear the announcement, follow these steps:

1. During a call where you hear that all lines are unavailable, press the scroll key to highlight the CallB soft key. Press OK to select.

2. Hang up. When the line becomes available, the system calls your station with a system ring (two short rings).

3. Answer the call to have the system automatically dial the external number for you.

NOTE:

speaker button or by picking up the handset. You hear a message that all trunks are busy and you are queued for the next available trunk. the Call Back

You can access the line at any time by pressing the line button, the

16 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 31

button and hang up to remain queued. If you hang up without pressing Call Back, you are removed from the queue. While you are queued, the line is unavailable for use.

Call Block (Selective Call Rejection)

Call Block (also known as Selective Call Rejection) allows you to program your phone to reject calls from a list of telephone numbers. All calls from phones on the list receive a message which says you are not accepting calls.

To use this feature (*60), you create a list of telephone numbers (internal or external) that receive the message when a call with that caller ID appears at your telephone.

Call Block is managed through a menu of commands activated by pressing digits on the keypad. The menu commands are:

• 1 - Enable/disable feature

• 2 - Add last caller to blocked list

• 3 - Add numbers to blocked list

• 4 - List numbers to blocked list

• 5 - Delete numbers from blocked list

The display on your telephone will show the options for each menu level. For example, if you press 5 to delete a number, the display will show: “1=Num, 2=List, 3=Del All, *=Main Menu”.

Enabling/Disabling Call Block

The VoIP system allows you to turn the Call Block feature on and off (i.e., decide when calls from your list will be forwarded and when they will ring at your telephone as usual). Disabling (turning off) the feature does not delete the list of callers who are blocked and receive the message.

1. Press *60 or *80 followed by OK button.

A voice prompt tells you whether Call Block is enabled or disabled and then gives the menu choices.

2. Press 1 to enable Call Block if it is disabled or to disable the feature if it is enabled.

Blocking Number of Last Call Received

1. Press *60 or *80 followed by OK button.

A voice prompt tells you whether Call Block is enabled or disabled and then gives the menu choices.

Swiss Voice Telephone User Guide System Telephone Features 17 621-00000121

Page 32

2. Press 2 to add the number of the last call you received to the blocked list.

You are returned to the Selective Call Forward menu.

3. Select a menu item or hang up.

NOTE:

list, but simply adds the most recent caller to your blocked list.

Adding a number this way does not affect any numbers already on your

Adding Numbers to Call Block List

1. Press *60 or *80 followed by OK button.

A voice prompt tells you whether Call Block is enabled or disabled and then gives the menu choices.

2. Press 3 to add telephone numbers to the list of numbers that will be blocked.

3. Enter the number with no spaces, dashes or special characters followed by the # key.

4. Press # to save the entry or * to exit without saving.

5. Select a menu item or hang up.

Listing Blocked Numbers

1. Press *60 or *80 followed by OK button.

A voice prompt tells you whether Call Block is enabled or disabled and then gives the menu choices.

2. Press 4 to hear the list of numbers which will be blocked.

The voice prompt announces the list and the first number.

3. Press # to hear the next number or press * to return to the Call Block menu.

NOTE:

through the list of member numbers, starting over with the first number after the last number is spoken.

4. Repeat the previous two steps until you have heard as many of the numbers as you want.

5. Press * to return to the Call Block menu when you are finished listening to member numbers.

As long as you press # for the next number, the system will scroll

Deleting Numbers from Call Block

1. Press *60 or *80 followed by OK button.

A voice prompt tells you whether Call Block is enabled or disabled and then gives the menu choices.

18 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 33

2. Press 5 to delete telephone numbers from the list of numbers which will be blocked.

3. The voice prompt provides options for deleting members including:

• Press 1 if you know the number to delete;

(see Step 4)

• Press 2 for a list of numbers;

(see Step 8)

• Press 3 to delete all numbers;

(see Step 14)

• Press * to return to the Call Block menu.

4. Press 1 to remove a specific number.

5. Enter the number to delete with no spaces, dashes or special characters

followed by the # key.

The voice prompt repeats the number you just entered.

6. Press # to save the entry (delete it from your list) or press * to cancel the entry.

7. Select a menu item or hang up.

8. Press 2 to hear the list of numbers and have the option to delete them as you

go through the list.

The voice prompt announces the list and the first number.

9. Press # until you find the number you wish to delete.

10. Press 1 to delete the number, # to hear the next number or * to return to the

Call Block menu.

The number is deleted immediately and the next number in the list is announced.

11. You can press 1 to delete it, # to hear the next number or * to return to the Call Block menu.

12. Repeat the previous three steps until you have found and deleted as many of the numbers as you want.

13. Press * to return to the Call Block menu or hang up

14. Press 3 to immediately delete all member numbers.

The voice prompt announces that all phone numbers have been removed from the list and you are returned to the Call Block menu.

15. Select a menu item or hang up.

Swiss Voice Telephone User Guide System Telephone Features 19 621-00000121

Page 34

Call Forward (All Calls)

Call Forward (All Calls) allows you to forward all calls for your phone to the number you enter. Calls will not ring at your phone and will be sent to the number you entered as the forward destination. If your telephone has a display, it will show that your telephone is forwarded. You can forward calls to an IP or non-IP phone.

If your phone does not have an indicator showing that the phone is forwarded, then it will emit one short ring or “ping ring” when a call comes in to the phone. The “ping ring” is provided to remind you that your phone is forwarded to another number.

Calls forwarded to an external number (7- or 10-digits) that are unanswered will roll over to voice mail (if available) at that number. Calls forwarded to an internal number (4-digit extension) that are unanswered will roll over to voice mail (if available) for the called party (not the forwarding destination).

External forwarding must be supported by your system for external numbers to be accepted. Be sure to include the access code for an outside line and the area code, if necessary, with the external number. Up to 20 digits may be entered.

NOTE:

system.

The specified destination number is not tested for validity by the VoIP

Enabling Call Forward (All)

…using the Phone

1. Use the scroll keys to select the “Forwr” softkey and press the OK button.

2. Enter the number to which you want to forward all calls. Be sure to enter the

number exactly as you would if you were to call that number. Include the area code, if necessary. The display shows the number as it is entered.

3. To forward your calls, do one of the following to hang up the phone:

• Press the OK button

• Press the Loudspeaker button

• Press the line button

• Pickup and replace the handset.

4. Call forward (all) is enabled and the display shows“Fwd number”.

…using Star Codes

NOTE:

Depending on available space on the display, the final entry (usually * for reenter or exit) may not appear completely.

1. Press 72# followed by OK button. The speaker phone turns on .

20 System Telephone Features Swiss Voice Telephone User Guide

The display will show the available options as the prompts are played.

621-00000121

Page 35

• If you do not have a previously configured forward number, you will be

instructed to enter a forwarding number and press #.

• If you previously configured a forwarding number, you will be instructed

to do one of the following:

• Press 1 to enable forwarding. Go to step 8.

• Press 2 to change the current forwarding number. Go to step 2.

2. Enter the number to which you want to forward all your calls. Be sure to enter the number exactly as you would if you were to call that number. Include the area code, if necessary. The display shows the number as it is entered.

3. Press #.

4. A prompt asks you to confirm the forwarding number by pressing # or re-enter

the forwarding number by pressing *.

• If you entered an external number, but are not allowed to forward calls to

external numbers, a prompt states the number is invalid and requests you enter a number.

5. If you pressed *, return to step 2 or hang up.

6. If you pressed #, you are offered the option to verify the forwarding number.

• Press 1 to verify the number you entered.

• Press 2 to enable the number. Go to step 8.

7. If you pressed 1, the forwarding number is dialed.

• Call is answered by a person: Explain your call, have them hang up,

and then press # to enable the forwarding number or * to exit without enabling forwarding.

• Call is not answered: Prompt explains call not connected and asks you

to press # to enable the forwarding number or * to exit without enabling forwarding.

• Answering machine or voice mail answers: Press # to escape, and

then press # to enable the forwarding number or * to exit without enabling forwarding.

8. Forwarding for all calls is enabled.

Disabling Call Forward (All)

…using the Phone

1. Press the scroll keys to highlight the “Forwr” softkey.

2. Press OK.

3. Call forwarding (all) is disabled and the phone hangs up.

…using Star Codes

1. Press 73# followed by OK button.

Swiss Voice Telephone User Guide System Telephone Features 21 621-00000121

Page 36

2. Call forwarding (all) is disabled and the phone hangs up.

Call Forward (Busy)

Call Forward (Busy) allows you to forward calls arriving at your phone while it is busy to be forwarded to the number you enter. Calls will not ring at your phone and will be sent to the number entered as the forward destination.

NOTE:

system, but the system does check to be sure it is okay for you to forward calls to external numbers. If you are not allowed to forward calls outside the phone system, you will hear a message that the forward number is invalid.

The specified destination number is not tested for validity by the VoIP

Enabling Call Forward (Busy)

NOTE:

Depending on available space on the display, the final entry (usually * for reenter or exit) may not appear completely.

1. Press 76# followed by OK button. The speaker phone turns on .

2. Enter the number to which you want to forward all your calls when busy. Be

sure to enter the number exactly as you would if you were to call that number. Include the area code, if necessary. The display shows the number as it is entered.

The display will show the available options as the prompts are played.

• If you do not have a previously configured forward number, you will be

instructed to enter a forwarding number and press #.

• If you previously configured a forwarding number, you will be instructed

to do one of the following:

• Press 1 to enable forwarding. Go to step 8.

• Press 2 to change the current forwarding number. Go to step 2.

3. Press # on the telephone keypad.

4. A prompt asks you to confirm the forwarding number by pressing # or re-enter

the forwarding number by pressing *.

• If you entered an external number, but are not allowed to forward calls to

external numbers, a prompt states the number is invalid and requests you enter a number.

22 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 37

5. If you pressed *, return to step 2 or hang up.

6. If you pressed #, you are offered the option to verify the forwarding number.

• Press 1 to verify the number you entered.

• Press 2 to enable the number. Go to step 8.

7. If you pressed 1, the forwarding number is dialed.

• Call is answered by a person: Explain your call, have them hang up,

and then press # to enable the forwarding number or * to exit without enabling forwarding.

• Call is not answered: Prompt explains call not connected and asks you

to press # to enable the forwarding number or * to exit without enabling forwarding.

• Answering machine or voice mail answers: Press # to escape, and

then press # to enable the forwarding number or * to exit without enabling forwarding.

8. Call forward (busy) is enabled.

NOTE:

to voice mail (if available) at the forwarded to destination. Calls that stay onnet and are unanswered will roll over to your voice mail (if available).

Calls forwarded to an off-net number that are unanswered will roll over

Disabling Call Forward (Busy)

1. Press 77# followed by OK button.

2. Call forward (busy) is disabled and the phone hangs up.

Call Forward (No Answer)

Call Forward (No Answer) allows you to forward calls that are unanswered at your phone to the number you enter. Calls will not ring at your phone and will be sent to the number entered as the forward destination.

NOTE:

Swiss Voice Telephone User Guide System Telephone Features 23 621-00000121

The specified destination number is not tested for validity by the VoIP

Page 38

Enabling Call Forward (No Answer)

NOTE:

Depending on available space on the display, the final entry (usually * for reenter or exit) may not appear completely.

1. Press 78# followed by OK button. The speaker phone turns on .

The display will show the available options as the prompts are played.

• If you do not have a previously configured forward number, you will be

instructed to enter a forwarding number and press #.

• If you previously configured a forwarding number, you will be instructed

to do one of the following:

• Press 1 to enable forwarding. Go to step 8.

• Press 2 to change the current forwarding number. Go to step 2.

2. Enter the number to which you want to forward all your calls when busy. Be sure to enter the number exactly as you would if you were to call that number. Include the area code, if necessary. The display shows the number as it is entered.

3. Press # on the telephone keypad.

4. A prompt asks you to confirm the forwarding number by pressing # or re-enter

the forwarding number by pressing *.

• If you entered an external number, but are not allowed to forward calls to

external numbers, a prompt states the number is invalid and requests you enter a number.

5. If you pressed *, return to step 2 or hang up.

6. If you pressed #, you are offered the option to verify the forwarding number.

• Press 1 to verify the number you entered.

• Press 2 to enable the number. Go to step 8.

7. If you pressed 1, the forwarding number is dialed.

• Call is answered by a person: Explain your call, have them hang up,

and then press # to enable the forwarding number or * to exit without enabling forwarding.

• Call is not answered: Prompt explains call not connected and asks you

to press # to enable the forwarding number or * to exit without enabling forwarding.

• Answering machine or voice mail answers: Press # to escape, and

then press # to enable the forwarding number or * to exit without enabling forwarding.

8. Call forward (no answer) is enabled.

NOTE:

to voice mail (if available) at the forwarded to destination. Calls that stay onnet and are unanswered will roll over to your voice mail (if available).

Calls forwarded to an off-net number that are unanswered will roll over

24 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 39

Disabling Call Forward (No Answer)

1. Press 79# followed by OK button.

2. Call forward (no answer) is disabled and the phone hangs up.

Call Forward (Out of Service)

Call Forward (Out of Service) allows you to forward for your phone when it is out of service to the number you enter. Calls will not ring at your phone and will be sent to the number you entered as the forward destination. You can forward calls to an IP or non-IP phone.

NOTE:

The specified destination number is not tested for validity by the VoIP

Enabling Call Forward (Out of Service)

NOTE:

Depending on available space on the display, the final entry (usually * for reenter or exit) may not appear completely.

1. Press 70# followed by OK button.

2. Enter the number to which you want to forward calls when your phone is out

of service. Be sure to enter the number exactly as you would if you were to call that number. Include the area code, if necessary. The display shows the number as it is entered.

The display will show the available options as the prompts are played.

• If you do not have a previously configured forward number, you will be

instructed to enter a forwarding number and press #.

• If you previously configured a forwarding number, you will be instructed

to do one of the following:

• Press 1 to enable forwarding. Go to step 8.

• Press 2 to change the current forwarding number. Go to step 2.

3. Press #.

4. A prompt asks you to confirm the forwarding number by pressing # or re-enter

the forwarding number by pressing *.

Swiss Voice Telephone User Guide System Telephone Features 25 621-00000121

Page 40

5. If you pressed *, return to step 2 or hang up.

6. If you pressed #, you are offered the option to verify the forwarding number.

• Press 1 to verify the number you entered.

• Press 2 to enable the number. Go to step 8.

7. If you pressed 1, the forwarding number is dialed.

• Call is answered by a person: Explain your call, have them hang up,

and press # to enable the forwarding number or * to exit without enabling forwarding.

• Call is not answered: Prompt explains call not connected and asks you

to press # to enable the forwarding number or * to exit without enabling forwarding.

• Answering machine or voice mail answers: Press # to escape, and

then press # to enable the forwarding number or * to exit without enabling forwarding.

8. Forwarding for out of service is enabled.

Disabling Call Forward (Out of Service)

1. Press 71# followed by OK button.

2. Call forward (out of service) is disabled and the phone hangs up.

Call Pickup

This feature lets you use one phone to answer another phone that is ringing. There are two types of Call Pickup: Directed Call Pickup and Group Call Pickup. Both phones must be members of the same Call Pickup Group. Your system administrator should tell you if you are in a pickup group and who the members are.

Directed Call Pickup

Directed Call Pickup lets you answer another phone from your phone when you hear the other phone ringing. Both phones must be members of the same Directed Call Pickup Group. Your system administrator should tell you if you are in a pickup group and who the members are.

…using the Phone

1. Press the scroll key until you see the DC Pick-Up (DC Pic) soft key.

2. Dial the ringing extension number to answer the phone and begin speaking

with the caller.

…using Star Codes

1. Press *12 followed by OK button.

2. Dial the ringing extension number to begin speaking with the caller.

26 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 41

Group Call Pickup

Group Call Pickup lets you answer another phone that is in your Call Pickup Group. Both phones must be members of the same Call Pickup Group. Your system administrator should tell you if you are in a pickup group and who the members are.

…using the Phone

1. Press the scroll key until you see the Group Pickup (Group) soft key.

2. Press the Group soft key to answer the phone and begin speaking with the

…using Star Codes

1. Press *06 followed by OK button.

2. Begin speaking with the caller.

Call Return

Using this feature dials the telephone number of the last incoming call. However, if the caller is shown as “Unknown”, then Call Return will not work.

caller.

Call Trace

1. Press *69 followed by OK button.

2. Wait for the called party to answer.

Call Trace allows you to record the telephone number of an offending call, but must be performed immediately after the offending call is ended.

NOTE:

receiving the offending call.

1. Hang up.

2. Press *57 followed by OK button.

The last number that called you is traced. After you initiate Call Trace, a recording informs you if the trace succeeded and provides you with an 800 number you can use to take legal action.

Your phone number and the caller ID of the offending caller is recorded in the phone system’s Call Data Record (CDR). Check with your service provider to retrieve the phone number of the traced call from the CDR. Note the time and date that you traced the call, as this will help the system administrator find the call in the CDR file.

The feature won't work if Call Waiting is triggered while you are

Swiss Voice Telephone User Guide System Telephone Features 27 621-00000121

Page 42

Call Waiting

If your phone is configured with Call Waiting, you can answer an incoming call without disconnecting from the current call.

If a call comes in while you are on the phone, you will hear a single beep repeated approximately every ten seconds. The line button (F1-F3) that the incoming call is on will begin blinking red.

NOTE:

next phone in the hunt group before you will be able to pick up the second incoming call.

If your phone is configured to be part of a Hunt Group, it will skip to the

Answering the Second Call

To answer a second call without ending the current call, press the red blinking line key. The first call is automatically placed on hold and you are connected to the incoming call.

Switching Between Held Calls

Press the red blinking line button to pick up the other call. The current call will automatically be placed on hold.

Call Waiting with Caller ID

If you have both the call waiting and caller ID capabilities, you can see the caller ID of a call waiting call on your telephone's display.

Call Waiting with ID Manager

While already on a phone call, this feature allows the user to view the Caller ID of a second incoming phone call and decide how the second call should be handled. The user has four options:

• Answer the new call and put the current on hold.

• Press 1 to send the call to voice mail.

• Press 2 to send a "Please Hold" announcement to the incoming caller.

• Press 3 to send a "Call Me Back" announcement to the incoming caller.

After the announcement is played, the call is disconnected.

28 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 43

This feature must be turned on by your system administrator for you to have access to its functions.

NOTE:

call comes in for the other line, you can only use the 2 - “Please Hold” feature to put the call on hold.

Pressing 1 or 3 for an incoming call for the other line-appearance will disconnect the caller from your phone, but the call will continue to ring on the other phone.The “send to voice mail” and “Call Me Back” features are not available because the call may still be picked up on the phone that the line is assigned to as a prime line.

Caller ID Block

This feature blocks the display of your phone number to the called party for this call only. Be aware that if the person you are calling does not accept anonymous calls, your call will be rejected since no Caller ID information is provided.

1. Press *67 followed by OK button.

2. Dial the phone number that you want to block.

Conference

If you have a line-appearance of another phone on your phone, and a

If supported by your system, you can conference several internal and/or external parties together. Check with your system administrator for the availability of this feature on your system.

To create a conference call, follow these steps:

1. Make a call or be engaged in a call.

2. Use the scroll buttons to highlight the Confr softkey and press OK to select it.

3. Dial the number of the person that you want to include in the conference.

4. When the person answers, inform the party about the conference and then

press the scroll button to highlight the Confr softkey. Press OK to add that party into the conference call.

5. Repeat steps 2-4 to add additional parties to the conference.

Conference Call Tips

• The parties connected to the conference call remain connected to each

other while you add additional parties. They may carry on a conversation with each other while you finish adding parties to the conference.

• Even if the call initiator disconnects, any of the other parties (who have

the conference feature) can use it to add new parties.

Swiss Voice Telephone User Guide System Telephone Features 29 621-00000121

Page 44

• To place a conference call on hold, scroll to highlight the Hold soft key.

The other parties can talk among themselves but they can’t hear you.

• When you put the call on hold, a beeping tone automatically sounds every

few seconds. To avoid disrupting the other callers, consider muting the call instead. To mute the call, press the Mute (*) button for at least two seconds.

• To transfer a conference call to another telephone, scroll to highlight the

Transfer (Trnsfr) soft key and press OK to select it. Dial the number to which you want to transfer the call and then press Trnsfr key again.

Dial Tone and Ringer Patterns

The VoIP telephone system generates different ringer and dial tones, depending on call conditions.

There are two types of dial tone:

• Internal Dial Tone – A continuous, higher-pitched tone

• External (Outside) Dial Tone – A continuous, lower-pitched tone

There are four types of ringers – all are answered the same way:

• One Ring – Internal (Extension-to-Extension) Calls and when the system

has called your extension to remind you or to notify you about something.

• Two Rings – External Calls

• Distinctive Rings – A different ring tone is provided for up to two

additional Direct Inward Dial (DID) numbers assigned to your telephone by the system administrator. These numbers do not appear as lines on your telephone, but ring your prime line with the appropriate ring when they are dialed.

• Priority Ring – The call screening feature allows users to designate

specific callers as important enough to ring through to their telephone even if Do Not Disturb is activated. A different ring tone is provided for calls assigned the Priority Call option. See “Priority Call” on page 46.

Direct Extension Assignment

This feature lets you program another telephone in the same corporate system to be your telephone. For example, you are visiting a branch office for an extended business trip and you want to program a “guest” telephone to ring as your telephone while you are there. This feature requires your old phone and the “new/ guest” phone to be the same type of phone.

Programming a Guest Phone

To program a guest phone to act as your phone, follow these steps:

30 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 45

1. From the guest /new phone, dial 588 (or the code provided by your system administrator). You are prompted to enter the telephone number which you want that phone to be (Presumably, your “original/old” phone number).

2. Enter your complete 10-digit telephone number, followed by the # key. You are prompted to enter a password. The password default is the last four digits of the phone number entered in this step.

3. Enter your password, followed by the # key. The phone is now programmed to be your phone and your old phone is removed from service.

NOTE: When you reassign your telephone number to the new phone, the button template from your “old” phone is assigned to the “new” phone.

Re-establishing the Guest Phone

To reset the guest phone to its original number, follow the steps to program a phone, using the original phone number and password of the guest phone.

Re-establishing Your Old Phone

Once you have programmed another phone with your old phone’s extension, you must reconfigure your old phone before using it. Your old phone displays the message “Pickup handset to configure”. Pickup the handset and perform the following steps:

1. Enter your old 10-digit phone number, followed by the # key. You are prompted to enter a password.

2. Enter the password, followed by the # key. (Your password is typically the last four digits of your phone number.) The phone is now programmed back to its original extension.

Do Not Disturb

Do Not Disturb instantly routes all your incoming calls to another destination (your voice mailbox, the main operator, your secretary, a co-worker, etc.), but still lets you make calls and use other telephone features. With Do Not Disturb enabled, the phone will not ring when a call comes in.

The display shows a door with an exit arrow when Do Not Disturb is enabled.

Tips for using Do Not Disturb

You can record a special voice mail greeting for callers to hear if your calls go to voice mail when you activate the Do Not Disturb feature. See Chapter 4, “Voice Mail Features (Default Menu)” for more information.

The Do Not Disturb destination where incoming calls are sent can be changed by your system administrator.

Swiss Voice Telephone User Guide System Telephone Features 31 621-00000121

Page 46

Enabling/Disabling Do Not Disturb

…using the Phone

To enable Do Not Disturb:

1. Press the Service key.

2. Scroll to Do Not Disturb ON.

3. Press OK to select.

To disable Do Not Disturb, press again.

…using Star Codes

The same star code is used to enable and disable Do Not Disturb since you are switching between the on and off mode for this feature.

1. Press *04 followed by OK button.

2. Hang up the handset.

Group Speed Dial

Hold

This feature provides additional speed dialing capabilities beyond those provided by the Abbreviated Dial feature. With Group Speed Dialing, you have access to a common speed dial list of up to 1,000 entries managed by your system administrator.

Group Speed Dial numbers are extension numbers that have been programmed to dial another number, usually an external number. Your system administrator will provide you with a list of Group Speed Dial numbers and their destinations.

This feature lets you place a call on hold. While a call is holding, the holding party occupies the associated line. (To place a call on hold and free the line, see the MultiCall Park feature description.)

1. During a conversation, press the HOLD button. Depending on your system configuration, the party may hear music, a recorded announcement, or silence while holding.

32 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 47

2. To resume the conversation, press the HOLD button.

NOTE:

minute after that, 3 short rings sound from the phone speaker, even if you are using the handset. This is to remind you that you have a call on hold.

NOTE:

Held Calls” on page 28.

Hold-on Queuing

This feature allows you to wait for a busy outgoing line to become available. (See “Hold-on Queuing” on page 33.)

When you try to make an external call and all outgoing lines are unavailable, you will hear a recorded announcement.

• Hold for a line to become available.

• When a line becomes available, the system automatically dials the

external number for you.

Hunt Groups

Starting one minute after the party is on hold, and occurring each

For more details on handling two calls at once, see “Switching Between

Intercom

The Hunt Group feature allows the VoIP system to distribute calls made to a specific "pilot" number or to any member of a defined group based on the specified hunting order. Your system administrator or manager should tell you if you are a member of a hunt group and who the other members are.

Use this feature to make and receive extension-to-extension intercom calls.

Making an Intercom Call

1. Press the Intercom button.

2. After hearing the dial tone, dial the desired 4-digit extension number.

NOTE:

connected, you must lift the handset in order to speak with the other party. The SPEAKER and MUTE buttons light.

When you send or receive an intercom call, remember that, once

Receiving an Intercom Call

Intercom calls are announced by a brief dial-tone followed by the intercom tones. A tone is played every 60 seconds during active intercom calls (except for MGCP phones).

Swiss Voice Telephone User Guide System Telephone Features 33 621-00000121

Page 48

Notes on Intercom Calls

• Intercom calls are announced by a brief dial-tone followed by the intercom

tones. A tone is played every 60 seconds during active intercom calls (except for MGCP phones).

• If the person you call has the Do Not Disturb feature active, or they are

already off-hook, you wil get a fast busy tone when attempting to call them using the intercom feature.

• If you use the Privacy feature (*67) to hide your identity from the person

you call, the call is converted into an regular call. If the person you call has a display phone, Private is displayed on their display. For phones without a display, the call rings in as any regular call.

• If you place an Intercom call to a person you are not allowed to intercom,

your intercom attempt is converted to a regular call that rings the other person’s phone.

Meet-Me Conference

If supported by your system, Meet-Me Conferencing provides the ability to schedule conference calls where the moderator (who has control of the conference) and other members (internal or external) call into the conference and are connected at the appropriate time to carry on the conference call.

Moderators can do any of the following:

• Schedule a conference

• Cancel a conference

• Modify a conference

• List all conferences

Check with your system administrator to find out if you are authorized to schedule Meet-Me Conferences. The default internal access number is 523, but check with your system administrator if the default does not work for your system. If a DID number was created for outside access, you can dial in from an external telephone to schedule Meet-Me Conferences. Your system administrator can provide you with the external access number.

Anyone can join Meet-Me Conferences from both internal and external telephones by dialing the correct numbers and entering the required ID. The default internal access number is 522, but your system may be different. Check with your system administrator for the internal access number you should use. If you need to join a Meet-Me Conference from outside the system, check with either the conference moderator (the person who set up the conference) or your system administrator to get the external access number for the Meet-Me Conference.

34 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 49

Joining a Meet-Me Conference

Joining a conference call is done by dialing the correct number and entering the Moderator or Guest ID. The system provides helpful prompts when dialing in too early or entering an incorrect ID. Only Moderators may extend a meet-me conference call.

To join a Meet-Me Conference

1. If dialing internally, dial the Meet-Me Join number (default is 522) followed by OK button. Otherwise, dial the ten-digit conference access number.

2. Enter the ID of the conference you wish to join.

• If you are the moderator of the conference, enter the Moderator ID.

• If you are a guest, enter the Guest ID (provided by the moderator of the

conference).

3. Press the # key.

• You will be prompted by the system:

“Please record your name after the tone, press the # key when you are done.”

4. Record your name and press the # key within 5 seconds.

NOTE:

to the conference without being identified. Within the 5 seconds, you may press the * key to cancel the current recording and start the recording over.

If you do not complete this step within 5 seconds, you will be connected

• Under normal operations, when you successfully enter the Guest or

Moderator ID and are not too early, the system will play the following greetings to you:

• If you are the first to join the conference:

“Your conference call is active. You are the first caller to join this conference. Please wait for the next participant.”

• If participants have already joined the conference:

“You are now being connected to the conference”.

• If you are within 5 minutes before the start of the conference call:

“Your conference will start in a few minutes, please wait or call back later.”

• When you join the conference, if you are the third (or later) conferee to

join, the system will play your recorded name and the join tone to the moderator and the other conference participants.

NOTE:

moderator and all remaining participants that someone has left the conference call.

Swiss Voice Telephone User Guide System Telephone Features 35 621-00000121

As participants leave the conference call, a “ding” sound will alert the

Page 50

Dialing In Too Early

If you dial the Meet-Me Conferencing number more than five minutes prior to the scheduled conference call time, you will hear the following message and the system will then disconnect:

“Your conference is not scheduled to start until (time) on (day, date). Please call back at that time.”

Entering an Incorrect ID

If you enter the wrong Guest or Moderator ID, the system informs you the conference you wish to join could not be found and prompts you to press 1 to re- enter the conference ID or press the * key to end the call.

If you pressed 1, do the following:

1. Enter the ID of the conference you wish to join.

2. Press the # key.

Extending the Conference Duration

Five minutes prior to the end of the call, the system plays a message to the moderator that the conference will end in five minutes. Instructions are provided to the moderator on how to extend the conference call, if desired. The conference call may be extended in increments of 5 minutes by pressing *6 for as long as needed or until the next scheduled conference call.

Roll Call

During a conference call, the moderator may initiate a roll call of the participants that have signed in by pressing *2. All conference call participants will hear:

“There are (n) people in the conference. The following people have joined the conference. (System plays the name of each participant as recorded.) Roll call complete.”

Adding More Ports to an Active Meet-Me Conference

During an active conference call, the moderator may add more ports if needed. To add more ports, do the following:

1. Press *3. The moderator will hear:

“Please enter the number of ports you wish to add followed by the # key.”

2. Enter the number of ports to be added, then press the # key. The system will check the availability of the ports and report results to the moderator. For example, the moderator wants to add six ports:

36 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 51

• If all six ports are available, the moderator will hear:

“Six additional ports have been reserved for this conference.”

• If only 5 of 6 ports are available, the moderator will hear:

“Five of six additional ports have been reserved for this conference.”

• If no ports are available, the moderator will hear:

“We are sorry, additional ports are not available at this time.”

Dropping a Conference Call

Should it be necessary, a moderator may be drop (end) a conference call while in progress. Reasons for dropping a conference call may include participants becoming loud, not allowing others to talk, and lack of courtesy, among others. To drop a conference call, press *7. All callers will be disconnected from the conference call and the call terminated.

However, the meet-me conference reservation remains in effect and partitipants can be invited to re-join the conference by dialing the meet-me conference number and entering the appropriate guest ID.

Muting a Conference Call

The moderator of the meet-me conference call can mute (disable the ability to speak in the conference) all parties in the meet-me conference call. The moderator also has the ability to un-mute (restore conversation).

The Mute function is toggled from the keypad by pressing *5 to enable or disable the mute function. Only the moderator can operate the mute function.

When Mute is in effect, the moderator can still speak to all members of the conference, but members of the conference cannot heard. Also the moderator may leave and re-join the muted conference, but will not be muted (I.e., the moderator can still talk to conference members).

When a meet-me conference is muted, all parties in the conference hear an announcement that the conference has been muted.

Once Mute is enabled (before or during the conference call), anyone joining the active conference will be muted as soon as they are connected to the conference call. Callers joining the conference when mute is in effect hear an announcement that the conference is muted after the announcement that the conference is active. Members of the conference will hear the join tone and the caller’s name.

Locking a Conference Call

Locking a meet-me conference prevents additional callers from joining the conference. Unlocking the conference allows additional callers to join the conference.

Swiss Voice Telephone User Guide System Telephone Features 37 621-00000121

Page 52

The Lock function is toggled from the keypad by pressing *4 to enable or disable the lock function.

When the moderator locksor unlocks a conference, only the moderator will hear an announcement that the conference has been locked or unlocked.

Callers who try to join the conference when it is locked hear an announcement that the conference is locked and they should contact the moderator for assistance.

Raising/Lowering Hands in a Conference Call

NOTE:

acknowledge raised hands.

If you are a member of a meet-me conference you can ask to be recognized or respond to a moderator’s question by raising and lowering your hand - in a virtual manner.

The moderator must be using the VOISS Assistant to see and

• Press #8 to raise your hand

• Press #9 to lower your hand

Raising your hand can be used to ask for permission to speak when the conference has been muted. It can also be used if the moderator wants to poll partiticpants and asks for a show of hands.

Scheduling a Meet-Me Conference

Scheduling a conference call is done by dialing the correct number and entering the date, time and length of the conference and number of conference members.

1. If dialing internally, dial the Meet-Me Join number (default is 522) followed by OK button. Otherwise, dial the ten-digit conference access number.

2. Press 1 to schedule a conference call.

3. Enter the date of the conference call in mm/dd/yy format.

4. Enter the 4-digit start time of the conference call in 24-hour format (HHMM).

All start times must be in quarter hour increments (e.g., 0800, 0815, 0830,

0845)

5. Enter the length of the conference call in 5-minute increments, but with a minimum of 15 minutes (e.g., 15, 20, 25, etc.) followed by the # key.

6. Enter the number of participants (conference ports to reserve) followed by the # key.

The system repeats your conference call settings to you as “You have requested to reserve a conference call for (day of week, date), at (time) with a duration of (X) minutes and (X) ports.”

38 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 53

7. Press the # key if the information is correct, otherwise press 1 to re-enter the conference call parameters.

NOTE:

conference call meeting IDs including the Moderator ID, Guest ID, and the dial-in number.

Write down this information. It should also be displayed across your display telephone.

8. Do one of the following:

If you pressed # to accept the settings, the system speaks your

• Press 1 to hear the information again, or

• Press * to return to the Meet-Me Conference setup menu, or

• Hang up.

Canceling a Meet-Me Conference

You may cancel a conference reservation at any time; however, conference reservations are frozen 30 minutes before the start time and cannot be cancelled after that time.

1. If dialing internally, dial the Meet-Me Join number (default is 522) followed by OK button. Otherwise, dial the ten-digit conference access number.

2. Press 2 to cancel a conference call.

3. Enter the Moderator ID of the conference you wish to cancel followed by the #

key.

The system confirms your decision to cancel the conference call including speaking the scheduled day and date, time, duration and ports.

4. Press the # key to confirm the cancellation or press the * key to return to the Meet-Me Conference setup menu.

• If you pressed #, the system announces that your conference reservation

has been cancelled.

• If you pressed *, the Meet-Me Conference setup menu is played.

Modifying a Meet-Me Conference

You may modify a conference reservation at any time; however, conference reservations are frozen 10 minutes before the start time and cannot be modified after that time.

1. If dialing internally, dial the Meet-Me Join number (default is 522) followed by OK button. Otherwise, dial the ten-digit conference access number.

2. Press 3 to modify a conference call.

Swiss Voice Telephone User Guide System Telephone Features 39 621-00000121

Page 54

3. Enter the Moderator ID that was received when the conference was scheduled followed by the # key.

The system announces the selected conference call settings to you as “You have selected to modify a conference call scheduled for (day), (date), at (time) with a duration of (X) minutes and (X) ports.”

4. Press the # key to confirm you want to modify this reservation or press * if this is the wrong reservation and return to the conference menu.

NOTE:

key to return to the Meet-Me Conference setup menu.

5. Enter the 4-digit start time of the conference call in 24-hour format (HHMM). All start times must be in quarter hour increments (e.g., 0800, 0815, 0830,

0845)

6. Enter the length of the conference call in 15-minute increments (e.g., 15, 30, 45, etc.) followed by the # key.

7. Enter the number of participants (conference ports to reserve) followed by the # key.

The system repeats your conference call settings to you as “You have requested to reserve a conference call for (day of week, date), at (time) with a duration of (X) minutes and (X) ports.”

8. Press the # key if the information is correct, otherwise press 1 to re-enter the conference call parameters.

If this is not the meet-me conference you want to modify, press the *

Getting a List of Meet-Me Conferences

You can listen to a list of Meet-Me Conferences you have scheduled as a moderator. you may need to do this to find the moderator ID for a conference in case you need to modify or delete the conference or the guest ID to distribute it to the attendees.

1. If dialing internally, dial the Meet-Me Join number (default is 522) followed by OK button. Otherwise, dial the ten-digit conference access number.

2. Press 4 to list all conference call reservations.

The system announces the number of conference reservations you currently have and then announces each conference providing the day of week and date, time, duration, ports, moderator ID and guest ID. After the last conference listing, the system informs you that there are no more conferences.

3. The conference menu is played and you may make a selection or hang up.

40 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 55

MultiCall Park

This feature lets you park more than one call from your phone or pick up a specific parked call. When parked, a call is assigned an ID number by the system. This ID number makes Multicall Park possible. Parking a call is similar to placing a call on hold, except that when a call is parked, you can pick up the parked call from anywhere in the system. Once the call is parked, the line is free again.

Parking a Call

1. Tell the caller that you are going to place them on hold.

2. Press the scroll key until the MCPark soft key is displayed.

3. Press OK to select.

4. The display shows “Park number is xxxx” and a voice prompt repeats the

same information.

NOTE:

retrieve this parked call.

5. Hang up.

Retrieving a Parked Call

NOTE:

1. Pick up the handset.

2. Dial the call ID number of the parked call you wish to retrieve.

3. Speak with the parked caller.

Music on Hold

Your telephone provides crystal clear voice conversations. However, if you listen to music on hold, you may notice that some types of music sound slightly distorted. This is normal. The VocalData system has been optimized to transmit and receive speech; music contains a variety of sounds that are considerably higher and lower in pitch than the human voice, so some of these musical sounds are not included in the audio signal.

Write down the Park Number because you will need to know it to

You can retrieve parked calls using any phone in the system.

Mute

Press and hold the Mute (*) button for 3 seconds to turn off the speakerphone/ handset microphone during a conversation. This way, you can converse with someone else in your office and the party on the phone will not be able to hear the conversation. Press and hold the Mute button again to turn the speakerphone/ handset microphone back on.

Swiss Voice Telephone User Guide System Telephone Features 41 621-00000121

Page 56

Night

The Night feature lets you determine where calls will be routed based on the time of day and day of the week. Typically, this feature is assigned to the receptionist’s or attendant’s telephone (usually the company’s main number) and is used when the attendant leaves the office and wants the automated attendant to answer calls. You can switch to the “night” or “after hours” mode during the day or to the “day” mode after hours.

• “Day” mode (or Mode 1) is defined by default as Monday - Friday, 8:00

am to 5:00 pm.

• “Night” mode (Mode 2) is defined by default as Monday - Friday, 5:01 pm

- 7:59 am and all day Saturday and Sunday.

These modes are defined by the service provider and can be configured for different time periods. When the system is in Day mode and has not been manuall switched, there is no label on the phone display. If the system is in Night mode or the Night button has been used to change the mode (either from Day to Night or Night to Day), the word Night appears on the phone display.

Pressing the Night button to change modes will briefly display a message of the selected mode. The easy way to tell which mode is active is:

• If “Night” shows during the Day mode period, Night has been activated.

• If “Night” shows during the Night mode period, Day has been activated.

The Night feature has three states – normal, temporary or permanent, which are changed when the Night button is pressed. The states are shown on the phone display as follows:

• Normal = no stars (this means the display is blank in Day mode and

shows Night in Night mode

• Temporary = one star in front of the word Night (this applies whether the

mode was changed from Day to Night or Night to Day)

• Permanent = two stars in front of the word Night (this applies whether the

mode was changed from Day to Night or Night to Day)

These modes are defined by the service provider and can be configured for different time periods.

The following table shows how to activate the various states of Night mode.

State Activation Definition Example

Normal Default state, no

activation required

Routes calls appropriately based on the time-of-day and dayof-week.

Monday-Friday 8-5, calls go to attendant’s phone. All other times, calls are answered by auto-attendant.

42 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 57

State Activation Definition Example

Temporary (*Night)

Permanent (**Night)

Return to Normal

On-hook Dialing

Press the Night button once.

Press the Night button twice.

Changes the mode, but will automatically revert back to the Normal state at the next change in the time-of-day/day-of-week schedule.

Changes the mode, but requires manual intervention to return to the Normal state.

Night mode is disabled, whether it is Temporary or Permanent.

Attendant leaves early Monday and activates Night mode. The system automatically returns to normal at 8 a.m. Tuesday morning.

Attendant will be out for several days and no one will answer the main number. Attendant uses Permanent Night mode, which remains in effect until the Night button is pressed again.

You can dial a number while the handset is on-hook by doing one of the following:

• Dial the phone number on the keypad followed by OK button

• Press the desired line button and dial the number.

• Press the Speaker button and dial the number.

• Press the scroll down key and select a speed dial button. Press OK to

dial.

• With the Redial soft key highlighted, press OK to dial.

• Press the scroll key and highlight the Intercom (Intcom) soft key. Press

OK to dial.

TIP:

You can pick the handset up at any time to conduct a private

conversation.

One-Touch Transfer

One-Touch Transfer allows you to transfer a call using predefined one-touch transfer buttons. You can make instant, “unsupervised” transfers with this feature, which is typically assigned to the receptionist’s telephone. The VoIP system administrator assigns either extension numbers or voice mail destinations to the buttons used for one-touch transfers. See also “Blind Transfer” on page 16 and “Transfer” on page 63.

Swiss Voice Telephone User Guide System Telephone Features 43 621-00000121

Page 58

For example, you might have a button for John Smith (labeled J Smith) that transfers a call to his telephone, or you might have a button labeled J Smith VM that transfers callers directly to his voice mail.

NOTE:

You cannot perform a one-touch transfer using a button that has been configured to speed dial.

If you have a button for John Smith’s line on your phone and see that the lamp associated with it is lit (telling you he is on the phone) or you know that he is out of the office, you can ask the calling party if they want to be transferred to his voice mail so they can leave a message.

A One-Touch Transfer button is not the same as the Speed Dial button.

Permanent Caller ID Block Release

If you chose to have your caller ID information blocked on all calls, this feature allows your caller ID information to be sent for this call only.

Your caller ID may be required for some calls to be completed. If your call will not be accepted without caller ID information you may get a message that the number you called will not accept anonymous (no caller ID) calls. You may use this feature to send caller ID information for that call only.

To allow your caller ID to be displayed on the phone you are calling:

1. Press *82 followed by OK button.

2. Dial the desired phone number.

The called number should either ring or be busy. You should not get the anonymous call rejection message.

Phone Configurator

The VoIP system allows the system administrator to configure your phone in the database before it is physically installed. You can then pick up the handset and enter your phone number and password (provided by your system administrator), and it will be assigned to your phone.

It also allows you to find out the telephone number and IP address assigned to any telephone. Using the Configurator, you can also re-assign your phone number to another telephone of a similar type (usually for a temporary period at another location) and then re-assign the number to back your regular telephone set.

44 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 59

Assigning Your Phone Number to Your Phone

When your phone is first installed, you may need to assign your phone number to your phone. Your administrator should provide both your phone number and a password to allow you to do this.

NOTE:

be required to change your password. If not, it is recommended that you change it for security.

To assign your phone number:

1. Take the phone off-hook or press the Speaker button.

2. Enter your complete telephone number and press #.

3. Enter your password and press #.

4. Hang up the phone.

5. Wait for the phone to reboot.

6. When your telephone indicates that it is back online, you can use the phone.

NOTE:

Configurator active on multiple lines, finish the assignment process on one of the lines. Any additional active calls to the Phone Configurator are on hold. When the phone becomes active, disconnect the held call.

Once you have assigned your phone number to your phone, you may

If you accidentally press more than one line button and have the Phone

IP Address/Phone Number Announcement

The IP address and phone number announcement feature of the Phone Configurator function allows dialing an extension to hear the IP address or phone number of the phone. This is especially useful in conference rooms with analog speaker phones or at other locations with an analog phone where the phone number is unknown.

• To hear the phone number, dial 585.

• To hear the IP address assigned to a phone, dial 586.

NOTE:

your access codes may be different. Check with the system administrator for the correct access codes if the default codes do not work.

These access codes are the default access codes for the system and

Changing the Extension Number

The extension number assigned to a phone may be changed using Phone Configurator. To change the extension number, dial 588 and follow the instructions.

NOTE:

code may be different. Check with the system administrator for the correct access code if the default code does not work.

Swiss Voice Telephone User Guide System Telephone Features 45 621-00000121

The 588 access code is the default for the system and your access

Page 60

Unassigning the Extension Number

You can unassign your number from your phone by dialing 589, entering your complete phone number, and phone password.

Priority Call

The Priority Call feature allows you to define numbers that will ring at your telephone with a special ring that tells you this is an important call. To use this feature, you manage a list of telephone numbers (internal or external) that cause the priority ring to sound when a call with that caller ID appears at your telephone.

Priority Call is managed through a menu of commands activated by pressing digits on the keypad. The commands are:

The display area on your telephone will show the options for each menu level. For example, if you press 4 to delete a number, the display will show: “1=Del Num, 2=List, 3=Del All, *=Menu”.

NOTE:

code may be different. Check with the system administrator for the correct access code if the default code does not work.

The 589 access code is the default for the system and your access

• 1 - Enable/disable feature

• 2 - Add members

• 3 - List members

• 4 - Delete members

Enabling/Disabling Priority Call

The VoIP system allows you to turn the Priority Call feature on and off (i.e., set the feature not to use the priority ring). Disabling (turning off) the feature does not delete your list of callers assigned to receive the priority ring.

1. Press *61 followed by OK button.

2. Press the Dial soft key or pickup the handset.

A voice prompt tells you whether Priority Call is enabled or disabled and then gives the menu choices.

3. Press 1 to enable Priority Call if it is disabled or to disable the feature if it is enabled.

4. Hang up.

Adding Members to the Priority Call List

1. Press *61 followed by OK button.

46 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 61

2. Press the Dial soft key or pickup the handset.

A voice prompt tells you whether Priority Call is enabled or disabled and then gives the menu choices.

3. Press 2 to add telephone numbers to the list of members who will trigger the priority ring.

4. Enter the number with no spaces, dashes or special characters followed by the # key.

5. Press # to save the entry (add it to your list) or press * to cancel the entry,

6. Select a menu item or hang up.

Listing Priority Call Members

1. Press *61 followed by OK button.

2. Press the Dial soft key or pickup the handset.

A voice prompt tells you whether Priority Call is enabled or disabled and then gives the menu choices.

3. Press 3 to hear the list of telephone numbers which will trigger the priority ring.

4. Press # to hear the next number or press * to return to the Priority Call menu.

NOTE:

through the list of member numbers, starting over with the first number after the last number is spoken.

5. Repeat the previous two steps until you have heard as many of the numbers as you want.

6. Press * to return to the Priority Call menu when you are finished listening to member numbers.

As long as you press # for the next number, the system will scroll

Deleting Priority Call Members

1. Press *61 followed by OK button.

2. Press the Dial soft key or pickup the handset.

A voice prompt tells you whether Priority Call is enabled or disabled and then gives the menu choices.

3. Press 4 to delete telephone numbers from the list of members who will trigger the priority ring.

• The voice prompt provides options for deleting members including:

• Press 1 if you know the number to delete;

(see Step 3)

• Press 2 for a list of numbers;

(see Step 8)

Swiss Voice Telephone User Guide System Telephone Features 47 621-00000121

Page 62

• Press 3 to delete all numbers;

(see Step 13)

• Press * to return to the Priority Call menu.

4. Press 1 to remove a specific number.

• You are prompted to enter the number to delete followed by the # key.

5. Enter the number with no spaces, dashes or special characters.

6. Press the # key.

• The voice prompt speaks the number you just entered and you are

prompted to press # to save the entry (delete it from your list) or press * to cancel the entry,

7. Press # or *.

You are returned to the Priority Call menu.

8. Select a menu item or hang up.

9. Press 2 to hear the list of numbers and have the option to delete them as you

go through the list.

• The voice prompt announces the list, speaks the first number and

prompts you to press 1 to delete it, # to hear the next number or * to return to the Priority Call menu.

10. Press # until you find the number you wish to delete.

11. Press 1 to delete the number.

The number is deleted immediately and the next number in the list is announced.

• You are prompted to press 1 to delete it, # to hear the next number or * to

return to the Priority Call menu.

12. Repeat the previous two steps until you have found and deleted as many of the numbers as you want.

13. Press * to return to the Priority Call menu or hang up.

14. Press 3 to immediately delete all member numbers.

The voice prompt announces that all phone numbers have been removed from the list and you are returned to the Priority Call menu.

15. Select a menu item or hang up.

48 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 63

Privacy Guard

Privacy Guard is a call screening service that works with Caller ID to identify all incoming calls that have no Caller ID, such as calls that are Anonymous, Unavailable, Out-of-Area, or Private. It forces callers to identify themselves by entering an access code or recording their name in order to complete the call. You will know who is calling and have four options for handling the call.

Access Codes

Privacy Guard provides the ability to create two kinds of access codes that you can give to family members, friends or business associates to allow them to identify themselves if they call and their caller ID is not available. You decide who gets which code.

For phones with a display, access codes are shown on the display as shown:

Privacy Guard (<access code>)

The Access Code is a 3-digit code that, when required, is entered followed by the # key. There is only one Access Code.

The Selective Caller List is a list of up to ten codes. Each cost must be 10-digits. When required, a caller enters the code followed by the # key.

HINT:

When creating the codes for the Selective Caller List, you want codes that are easy for the caller to remember and use. If the code will be used for an individual, you might want to use the phone number most commonly used by that person. If it is for a group of people or a business, use a number that will be easy for them to use and you to recognize, such as a main business number.

Caller Actions

When Privacy Guard is enabled, calls that do not have any Caller ID information are automatically answered and the caller hears an announcement followed by a series of prompts.

The announcement explains you do not accept unidentified calls and that their Caller ID information was not received. They are instructed to do one of the following:

• Press 1 to enter an access code.

• Press 2 to record their name so that the call can be announced, .

If they enter anything other than the menu options, they will be prompted two more times to enter a valid menu option. If they do not select a valid option in the allowed time, the call is dropped.

Swiss Voice Telephone User Guide System Telephone Features 49 621-00000121

Page 64

Entering an Access Code

If a caller presses 1, they are asked to enter an access code, which can be either the Access Code or one of the codes in the Selective Call List, followed by the # key. A prompt tells them to wait while the call is completed.

If an invalid access code is entered, the caller will be prompted two more times to enter a valid access code. If they do not enter a valid access in the allowed time, the call is dropped.

Recording a Name

If a caller presses 2, they are asked to record either their name or their company name and press the # key. After playing the beep, the system will record up to 5 seconds.

When the user presses # or the recording time ends, a prompt tells them to wait while the call is completed.

The system records whatever is spoken during the 5 seconds, which can be either the caller’s name or silence. If the caller does not record a name, no name will be spoken when you answer the call.

Answering Privacy Guard Call

Once a caller has entered an access code or recorded their name, the call will ring on your phone. If you have a display and receive caller ID information, you will see “From Privacy Guard” on the display. If the caller entered an access code, the access code digits will be displayed also.

If the caller entered an access code, your telephone rings normally and you are connected to the caller when you answer the call.

If the caller recorded their name, your telephone rings with a priority ring. When you answer the call, a prompt is played that announces the call and offering the following options:

• Press 1 to answer the call.

• Press 2 to play an announcement to the caller that you are unavailable.

• Press 3 to transfer the caller to voice mail.

NOTE:

telephone for your voice mail mailbox or for another voice mail mailbox, such as the main number (attendant phone) or another person’s mailbox (executive assistant phone). However, if you do not have your own mailbox and choose this option, you will get reorder (fast busy). If you do not have a voice mail button on your phone, this option is not available.

This option will be available if you have a voice mail button on your

• Press 4 to deliver a message that you do not accept sales or soliciation

calls and you are not to be called again.

50 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 65

If you enter anything other than the available menu options, you will be prompted two more times to enter a valid menu option. If you do not select a valid option in the allowed time or if you hang up without making a choice, the system plays the announcement that you are unavailable and disconnects the call.

Enabling/Disabling Privacy Guard

The VoIP system allows you to turn the Privacy Guard feature on and off (i.e., decide when calls without Caller ID information will be screened). Disabling (turning off) the feature does not delete any access codes already entered for the feature.

1. Press *88 followed by OK button.

A voice prompt tells you whether Privacy Guard is enabled or disabled and then gives the menu choices.

2. Press 1 to enable Privacy Guard if it is disabled or to disable the feature if it is enabled.

3. Choose another option or hang up.

Managing the Access Code

Your 3-digit Access Code is managed using the keypad on your telephone. You can change the code at any time and can listen to your chosen number if you forget what you set.

Changing the Access Code

1. Press *88 followed by OK button.

A voice prompt tells you whether Privacy Guard is enabled or disabled and then gives the menu choices.

2. Press 2 to set or change the 3-digit Access Code.

3. Enter the Access Code by pressing the desired digit keys on the telephone

keypad.

4. Press # to save the entry or * to exit without saving.

5. Select a menu item or hang up.

Listening to Access Code

1. Press *88 followed by OK button.

A voice prompt tells you whether Privacy Guard is enabled or disabled and then gives the menu choices.

2. Press 5 to hear the numbers in the Selective Call List.

3. The first number in the Selective Call List is played.

Swiss Voice Telephone User Guide System Telephone Features 51 621-00000121

Page 66

4. Press # to hear the next number.

Continue pressing # until you have heard all the numbers. When you reach the end of the list, the system will take you back to the beginning of the list.

5. When you are done listening to numbers, press * to return to the main menu.

6. Select a menu item or hang up.

Managing the Selective Caller List

Your 10-digit Selective Call List access codes are managed using the keypad on your telephone. You can change the codes at any time and can listen to the numbers you have programmed. You can delete numbers to remove them from the list to end their ability to call you, to change the numbers, or to remove a old or no longer used number so you can add new numbers.

Adding to the List

1. Press *88 followed by OK button.

A voice prompt tells you whether Privacy Guard is enabled or disabled and then gives the menu choices.

2. Press 4 to add numbers to the Selective Call List.

3. Enter the number by pressing the desired digit keys on the telephone keypad.

4. Press # to save the entry or * to exit without saving.

5. Select a menu item or hang up.

NOTE: If you try to add a number when you already have 10 numbers, a prompt tells you the list is full, no more numbers can be added and that a number must be deleted to add a new number.

Listening to the List

1. Press *88 followed by OK button.

A voice prompt tells you whether Privacy Guard is enabled or disabled and then gives the menu choices.

2. Press 5 to hear the numbers in the Selective Call List.

3. The first number in the Selective Call List is played.

4. Press # to hear the next number.

Continue pressing # until you have heard all the numbers. When you reach the end of the list, the system will take you back to the beginning of the list.

5. When you are done listening to numbers, press * to return to the main menu.

6. Select a menu item or hang up.

52 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 67

Deleting from the List

1. Press *88 followed by OK button.

A voice prompt tells you whether Privacy Guard is enabled or disabled and then gives the menu choices.

2. Press 6 to delete the numbers in the Selective Call List.

3. Select from the available options:

• If you know the phone number you wish to delete, press 1.

• To hear a list of numbers to delete, press 2.

• To delete all numbers, press 3,

• To return to the main menu, press the * key

4. If you pressed 1, do the following:

a. Enter the number to remove.

b. Press # to remove or press * to cancel (return to the main menu).

c. If you pressed #, the system repeats the number you entered.

d. Press # to delete the entry or * to exit without saving.

e. Select a menu item or hang up.

5. If you pressed 2, do the following:

a. The first number in the Selective Call List is played.

b. Press 1 to delete the number or # to hear the next number.

c. Repeat these steps until you are finished deleting numbers.

d. Press * to exit.

e. Select a menu item or hang up.

6. If you pressed 3, all numbers in the list are immediately deleted and you return

to the main menu.

WARNING:

Call List. As soon as you press 3 all numbers are deleted. Be very sure this is what you want to do before pressing 3.

7. Select a menu item or hang up.

There is no confirmation for deleting all numbers in the Selective

Queue/ACD (Automatic Call Distribution)

The Automatic Call Distribution (ACD) queuing feature allows the VoIP system to distribute incoming calls arriving at the pilot number to a defined group of phones. You will have one or more feature buttons on your telephone assigned as queue lines, depending on how many ACD groups you belong to.

Swiss Voice Telephone User Guide System Telephone Features 53 621-00000121

Page 68

Finding Your Queues

The queue name is visible on the phone when you are logged out of the queue. It is not visible when you are logged into the queue.

When you are logged out of the queue, the name is displayed next to the line button to which the queue is assigned. The names of the queues assigned to the phone will also appear at the bottom of the display just above the soft key labels and the name will be preceded by a star (

).

Logging Into/Out of Queues

You may log into multiple queues simultaneously by pressing the queue button for each queue for which you wish to be active.

Press the button associated with the queue you want to be logged into.The name of the queue will no longer be displayed next to the line button on the LCD.

Answering Calls from Queues

When a call from the queue is distributed to your phone, the phone will ring. You MUST press the queue button to answer calls from the ACD queue. Otherwise, you will activate your prime line and hear dial tone.

NOTE:

at your telephone.

1. Press the line button assigned to the queue line that is ringing.

2. Speak to the calling party.

NOTE:

TIP:

so that you can leave the handset offook while waiting for the next call.

You must be logged into a queue before calls from the queue will ring

You may wish to pick up the handset to have a private converstaion.

If you are using a headset, use the End Call or Release button to end calls

Viewing Calls-in-queue Information

If the Display Queue Status feature has been activated for your phone, you will be able to see the number of unanswered calls currently in queue for the displayed queue. The information display format is

For example, “Pubs=2” would mean there are two calls waiting in the queue named Pubs.

If you have been provided with queue status display from multiple queues, your phone will show the calls-in-queue status for the queue which most recently received a call.

54 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 69

Redial

This feature lets you redial the last number (internal or external) that you dialed.

…using the Phone

1. Press the Redial soft key (There is no need to select a line or dial the outside

line access code.)

2. Speak to the called party.

…using Star Codes

1. Dial *07 followed by OK button.

2. Speak to the called party.

Remote Access to Call Forwarding

This feature allows you to call a DID number from any telephone and set, change or cancel the destination phone number that is the forwarding target for all incoming calls to your telephone. Contact your system administrator for the DID number to call to make use of this feature.

Setting or Changing Remote Forwarding

1. Dial the DID number for Remote Access to Call Forwarding. (If calling from an internal business phone, dial 9 first.)

NOTE:

2. Enter the complete phone number of your IP phone, followed by the # key.

3. Enter the phone’s password, followed by the # key

If you have your phone forwarded to another phone, your current forwarding number is announced.

4. Enter the new forwarding number followed by the # key. Enter the number as if you were dialing it, including the area code if necessary.

You hear an announcement that the forwarding number has been changed and the call is idled.

A voice prompt leads you through the remaining steps.

Canceling Remote Forwarding

1. Dial the DID number for Remote Access to Call Forwarding. (If calling from an internal business phone, dial 9 first.)

NOTE:

2. Enter the complete phone number you want to access, followed by the # key.

Swiss Voice Telephone User Guide System Telephone Features 55 621-00000121

A voice prompt leads you through the remaining steps.

Page 70

3. Enter the phone’s password, followed by the # key

If you have your phone forwarded to another phone, your current forwarding number is announced.

4. Do one of the following:

• Press # to cancel remote forwarding

• Hang up without pressing any keys to quit the canceling operation.

Remote Phone

The Remote Phone feature provides the capability to set up a remote phone to act as if it were your IP phone. Instead of placing and receiving calls from your IP phone, calls are made and answered from the Remote Phone.

For example, if you configure your cell phone to be your remote phone, all calls coming into your IP (office) phone would ring your cell phone instead. Callers will hear an announcement asking them to wait while the called party is located and giving them the option to leave a voice mail.

You hear an announcement that the forwarding number has been changed and the call is idled.

For this feature to be available, a Remote button must be provided on your IP phone by your service provider. However, the IP phone does not have to be in service for the Remote Phone feature to be operational.

NOTE:

be playing on-hold music), an announcement tells you that 911 is not allowed from Remote Phone and advises you to hang up the phone and try again. Until you hang up the phone and disconnect from the Remote Phone feature, you will receive the announcement.

If you dial 911 from the remote phone while it is in remote mode (it will

Dial-in Setup of Remote Phone

To set up a remote phone by dialing in, you must call using the remote phone where your IP phone calls will be forwarded.

1. From the remote phone (example, your cell phone or a hotel phone), dial the Remote Phone access DID number. Your system administrator should have provided this number to you.

EXAMPLE:

destination phone.

2. Enter the phone number of your IP phone followed by the pound sign (#).

The user dials the Remote Phone DID 469-555-2203 from the

3. Enter the password for your IP phone followed by #.

56 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 71

4. DO NOT hang up the destination phone. Leave it off-hook.

5. If a call comes in, press star (*) to answer the call.

6. Disconnect from a call by pressing “###”, which will leave the Remote Phone

active (you will hear hold music playing).

NOTE:

active call.

Be aware that if you are using a cell phone, the phone is still in an

Deactivating Dial-up Remote Phone

If you hang up the remote phone, it will deactivate the Remote Phone connection.

Web Portal Setup of Remote Phone

The remote phone feature can be activated via the Web Portal by selecting Options > Remote. You must check the box labeled “Enable Remote User”, then enter the phone number of the remote phone (for example, a cell phone or hotel phone number).

From the Web Portal, you can check a box to Enable Remote Caller ID. When checked, the caller’s Caller ID will display on your remote phone display (if it has one). When unchecked, your IP phone number will be displayed. This way, when you see your own IP phone number on the Caller ID, you will know that it is an incoming remote call.

You can also set the number of seconds the phone will ring unanswered before the call is redirected to voice mail or other destination.

The Web Portal will only show the Remote Phone enabled status if the remote phone was activated from the Web Portal. If the remote phone was enabled by dialing into the system from the remote phone, the active status will not be shown on the Web Portal display.

NOTE:

Phone number through the Web Portal, when you click “Save”, it will disconnect your current remote phone call.

In the Web Portal, when the Auto Enable When Phone OOS checkbox is checked, the system will automatically enable Remote Phone and route calls to the Remote Phone number when the phone is out of service. The Remote Phone feature will not be auto-enabled until a call arrives after the phone has been declared out of service. If a call arrives at the phone before the Call Agent has determined the phone is out of service, the Call Agent will send the call to the No Answer destination. As soon as the Call Agent determines the phone is out of service, the Remote Phone feature will be automatically enabled and all further calls will be sent to the Remote Phone number.

If you are engaged in a remote phone call, and you change the Remote

Swiss Voice Telephone User Guide System Telephone Features 57 621-00000121

Page 72

When the phone with Auto Enable When Phone OOS checked returns to service after the outage, Remote Phone is not disabled. Both the phone and Remote Phone will ring for each incoming call. The user must disable remote mode using the Web Portal or by pressing the Remote button on the phone.

Deactivating Remote Phone via Web Portal

If you enable Remote Phone from the Web Portal, you can hang up the remote phone and the remote feature will still be active. The feature canbe disabled by unchecking the Enable Remote User field in the Web Portal.

Selective Call Forward

Selective Call Forward allows you to program your phone to send calls from a list of telephone numbers to another telephone number. All calls from phones on the list go to the same destination, which can be changed at any time.

To use this feature, you designate the forward destination and manage a list of telephone numbers (internal or external) that are forwarded to that number when a call with that caller ID appears at your telephone.

Selective Call Forward is managed through a menu of commands activated by pressing digits on the phone keypad. The commands are:

• 1 - Enable/disable feature

• 2 - Enter the forward (destination) number

• 3 - ID (forward destination number)

• 4 - Add members (to list to be forwarded)

• 5 - List members (of list to be forwarded)

• 6 - Delete members (from list to be forwarded)

The display on your telephone will show the options for each menu level. For example, if you press 6 to delete a number, the display will show: “1=Num, 2=List, 3=Del All, *=Main Menu”.

Enabling/Disabling Selective Call Forward

The VoIP system allows you to turn the Selective Call Forward feature on and off (i.e., decide when calls from your list will be forwarded and when they will ring at your telephone as usual). Disabling (turning off) the feature does not delete the list of callers assigned for forwarding.

1. Press *63 or *83 followed by OK button.

A voice prompt tells you whether Selective Call Forward is enabled or disabled and then gives the menu choices.

58 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 73

2. Press 1 to enable Selective Call Forward if it is disabled or to disable the feature if it is enabled.

3. Hang up.

Entering the Forwarding Destination Number

1. Press *63 or *83 followed by OK button.

A voice prompt tells you whether Selective Call Forward is enabled or disabled and then gives the menu choices.

2. Press 2 to enter the forwarding number (destination for forwarded calls).

3. Enter the forwarding number followed by the # key

4. Press # to save the entry (add it to your list), or press * to cancel the entry,

5. Select another menu item or hang up.

Identifying the Forwarding Destination Number

1. Press *63 or *83 followed by OK button.

A voice prompt tells you whether Selective Call Forward is enabled or disabled and then gives the menu choices.

2. Press 3 to hear the forwarding number (destination for forwarded calls).

The voice prompt tells you the forwarding number and you are returned to the Selective Call Forward menu.

Adding Forwarded Phone Numbers

1. Press *63 or *83 followed by OK button.

A voice prompt tells you whether Selective Call Forward is enabled or disabled and then gives the menu choices.

2. Press 4 to add telephone numbers to the list of members who will be forwarded.

3. Enter the number with no spaces, dashes or special characters, followed by the # key.

4. Press # to save the entry (add it to your list) or press * to cancel the entry,

5. Select another menu item or hang up.

Listing Forwarded Phone Numbers

1. Press *63 or *83 followed by OK button.

A voice prompt tells you whether Selective Call Forward is enabled or disabled and then gives the menu choices.

Swiss Voice Telephone User Guide System Telephone Features 59 621-00000121

Page 74

2. Press 5 to list telephone numbers of members who will be forwarded.

3. Press # to hear the next number or press * to return to the Selective Call

Forward menu.

NOTE:

through the list of member numbers, starting over with the first number after the last number is spoken.

4. Repeat the previous two steps until you have heard as many of the numbers as you want.

5. Press * to return to the Selective Call Forward menu when you are finished listening to member numbers.

6. Select another menu item or hang up.

As long as you press # for the next number, the system will scroll

Deleting Forwarded Phone Numbers

1. Press *63 or *83 followed by OK button.

A voice prompt tells you whether Selective Call Forward is enabled or disabled and then gives the menu choices.

2. Press 6 to delete telephone numbers from the list of numbers which will be forwarded.

3. The voice prompt provides options for deleting members including:

• Press 1 if you know the number to delete;

(see Step 4)

• Press 2 for a list of numbers;

(see Step 8)

• Press 3 to delete all numbers;

(see Step 14)

• Press * to return to the Selective Call Forward menu.

4. Press 1 to remove a specific number.

5. Enter the number with no spaces, dashes or special characters, followed by the # key.

6. Press # to save the entry (delete it from your list), or press * to cancel the entry,

7. Select another menu item or hang up.

8. Press 2 to hear the list of number and have the option to delete them as you

go through the list.

The voice prompt announces the list, speaks the first number and prompts you to press 1 to delete it, # to hear the next number or * to return to the Selective Call Forward menu.

9. Press # until you find the number you wish to delete.

60 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 75

Speaker

10. Press 1 to delete the number.

The number is deleted immediately and the next number in the list is announced.

11. Press 1 to delete it, # to hear the next number or * to return to the Selective Call Forward menu.

12. Repeat the previous three steps until you have found and deleted as many of the numbers as you want.

13. Press * to return to the Selective Call Forward menu or hang up.

14. Press 3 to immediately delete all member numbers.

The voice prompt announces that all phone numbers have been removed from the list and you are returned to the Selective Call Forward menu.

15. Select another menu item or hang up.

Press the Speaker button to turn on your speaker to select your default prime line, to return to using the handset while listening through the speaker, or to hang up the phone during a speakerphone conversation.

Speed Dial

This feature allows you have a favorite phone number associated with a Speed Dial softkey that appears in the display on the phone.

Programming a Speed Dial Button

Contact your system administrator to have Speed Dial numbers programmed for your phone.

Using a Speed Dial Button

1. Use the scroll buttons to located the descired speed dial softkey.

2. Press the OK button.

Identifying the Number Assigned to a Speed Dial Button

The speed dial softkey should be labeled with either the number or name you provided the administrator. However, if the button read Speed Dial or is blank, you can find the number by doing the following:

1. Use the scroll buttons to located the descired speed dial softkey.

2. Press the OK button.

Swiss Voice Telephone User Guide System Telephone Features 61 621-00000121

Page 76

3. Read the dialed number in the phone display.

Modifying a Speed Dial Number

To change your Speed Dial numbers, contact your system administrator.

Deleting a Speed Dial Number

To delete one or more Speed Dial numbers, contact your system administrator.

Star Codes

The codes used by analog DTMF users to activate features (commonly referred to as "star codes") are also supported for IP phones. By pressing the pound or star button on the telephone and entering the proper code, you can make use of these codes for feature use.

The feature must be active at your phone for it to be accessed from the star codes (that is, you can't use features that aren't turned on) and some caution should be used when activating features from star codes, since they may not be reflected in display messages or lamp activity on the telephone.

NOTE:

This table lists the feature codes that are the default values for your phone system at the time of installation. They may be changed by your system administrator to meet the needs of your company. Any list of feature codes given to you by your system administrator should be used in place of the codes listed here.

Table 1: Feature Matrix

Feature Name Enable Disable

Abbreviated Dial - Program 75# 75#

Abbreviated Dial - Enable *3+code N/A

Anonymous Call Rejection *77 *87

Call Forward (Out of Service) (On/Off)

Call Forward (All) 72#+number+#73#

Call Forward (Busy) (On/Off) 76#+number+#77#

Call Forward (No Answer) (On/Off)

70#+number+#71#

78#+number+#79#

Call Return *69 N/A

Call Trace *57 N/A

62 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 77

Table 1: Feature Matrix

Feature Name Enable Disable

Caller ID Block *67 (suspend for current call) N/A

Directed Call Pickup (Bus only) *12+your extension

Do Not Disturb *04 *04

Group Pickup (Bus only) *06

Permanent Per Call Block N/A *82+number

Priority Call *61+menu *61+menu

Privacy Guard *88+menu *88+menu

Redial *07 N/A

Selective Call Forward *63+menu *83+menu

Selective Call Rejection (Call Block)

Voice Mail *09 *09

*60+menu *80+menu

Transfer

Use this feature to transfer a call to another number. See also“Blind Transfer” on page 16 and “One-Touch Transfer” on page 43.

1. Tell the calling party you will transfer the call, then press the “Trnsfr” soft key.

The call is placed on hold and you hear a dial tone.

2. Dial the number to which you want to transfer the call.

3. If the called party answers, you can inform them of the transfer and do one of

the following:

• Hang up and let the call transfer.

• Press the line button which has the held call to cancel the transfer and

return to the holding party.

4. If the called party does not answer, you can do one of the following:

• Press the line button which has the held call to cancel the transfer and

return to the holding party, or

• Hang up and let the call transfer to the called party’s voice mail.

Swiss Voice Telephone User Guide System Telephone Features 63 621-00000121

Page 78

64 System Telephone Features Swiss Voice Telephone User Guide

621-00000121

Page 79

Chapter 4 Voice Mail Features (Default Menu)

The voice mail system stores messages in your personal voice mailbox from callers who are unable to speak with you, and provides an indication that voice mail has arrived. The F4 (Voice Mail) key on the SwissVoice telephone flashes red when new or unsaved voice messages are stored in your mailbox.

You can access the voice mail system on your phone by pressing *09 or by pressing the F4 (Voice Mail) button.

System settings determine the number (and length) of voice mail messages that are stored in your voice mailbox. If supported by your system, callers can press “0” while they are “in” your mailbox to transfer to your main number or operator.

The voice mail system also provides both personal and group distribution lists which let you send a voice mail to a defined group of people as easily as sending a voice mail to a single user. Combining the ability to compose a voice mail message before sending it with a distribution list, you can easily create and send a voice mail message to multiple users or lists.

Menus and Commands

The following commands allow you to access your voice mail system.

Access Code Function

1 Play inbox messages

2 Play saved messages

3 Change password

4 Playback personal greetings (for options see “Voice Mail Personal

Greeting List” on page 66)

5 Record personal greetings (for options see “Voice Mail Personal

Greeting List” on page 66)

6 Access personal distribution groups (for options see “Voice Mail

Distribution List” on page 67)

Table 2: Voice Mail Main Menu

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 65 621-00000121

Page 80

Table 2: Voice Mail Main Menu

Access Code Function

7 Compose a message (for options see “Voice Mail Compose List”

on page 67)

8 Manage custom operator number (Not supported for stand-alone

mailboxes.) [for options see “Voice Mail Custom Operator (Zero Out) List” on page 68)

* (star) Exit the voice mail system

Table 3: Voicemail Message Controls

Feature Before Mail

Message

Rewind NA NA 7

Rewind to beginning NA NA 77

Next message 8 8 #

Forward message 6 6 6

Reply message 2 2 2

Dial Back Originator 3 3 3

Replay message 7 7 NA

Delete 4 4 4

Save 5 5 5

Pause/Unpause Play NA NA 8

Fast Forward NA NA 9

Fast Forward to the End NA NA 99

Skip to Previous Menu Options * * *

After Mail Message

During Mail Message

NOTE:

If you are listening to the introductory message and you press *, you will exit from voice mail.

Table 4: Voice Mail Personal Greeting List

Access Code Function

1 No Answer greeting

2 Do Not Disturb greeting

3 Busy greeting

66 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 81

Table 4: Voice Mail Personal Greeting List

Access Code Function

4 Name greeting

5 Replace personal greetings with default greetings

* (star) Return to main voice mail menu

Table 5: Voice Mail Distribution List

Access Code Function

1 Hear a list of all distribution groups

2 Edit a distribution group

1 - list of members 2 - add a member 3 - delete a member 4 - hear the group name 5 - change the name * - return to the previous menu

3 Create a distribution group

4 Delete a distribution group

* (star) Return to main voice mail menu

Table 6: Voice Mail Compose List

Access Code Function

1 Send message

2 Change message (re-record)

3 Review message (listen to recorded message)

4 Set message options (for options see “Voice Mail Message

Options List” on page 68)

* (star) Return to main voice mail menu

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 67 621-00000121

Page 82

Table 7: Voice Mail Message Options List

Access Code Function

1 Marks message as Urgent

2 Marks message as Private

3 Requests Return Receipt - you are notified recipient as accessed

the message

9 Clears all options

* (star) Return to main voice mail menu

NOTE:

Occassionally a return receipt may be returned without the recipient hearing the message if your message is the first new message and the recipient hangs up or skips to the next message before listening to the message.

Table 8: Voice Mail Custom Operator (Zero Out) List

Access Code Function

1 Change number of custom operator (zero out target)

2 Restore default number of custom operator (zero out target)

* (star) Return to main voice mail menu

Accessing Your Voice Mail

You can access your voice mailbox from several different sources:

• Your phone

• Any other internal phone

• Any touchtone phone outside your office.

• The email program on your PC (password required)

…from your phone

1. Press the F4 (voice mail) button or dial *09 to access your voice mail system.

2. Enter your password (if required).

3. If you have new voice mail, the messages are identified and played.

Otherwise, you will be prompted with choices to play your inbox messages, play your saved messages, change your password, playback your greetings, record new greetings, or exit the voice mail system.

68 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 83

4. Press the corresponding digit on your phone to select the desired voice mail function.

…from any other internal phone

1. Dial 555 (or the code provided by your system administrator). You hear a

welcome greeting and are prompted to enter your extension number.

2. Enter your extension number. You are prompted to enter your password.

3. Enter your numeric password, followed by the # key.

NOTE:

mail, the message is identified and played. Otherwise, you are prompted with choices to play your saved messages, change your password, playback your greetings, record new greetings, or exit the voice mail system.

4. Press the corresponding digit on your phone to select the desired voice mail function.

If you have new, or previously heard but not saved or deleted, voice

…from any outside touchtone phone

Dialing Main Number

1. Dial your main telephone number for the Auto Attendant feature and press 555

(or the code provided by your system administrator).

NOTE:

number you have been given for voice mail system access by your system administrator.

NOTE:

number.

2. Enter your extension number.

If your system is set up for direct voice mail access, dial the telephone

You hear a welcome greeting and are prompted to enter your extension

3. You will be prompted to enter your password.

4. Enter your numeric password, followed by the # key.

NOTE:

main auto-attendant menu. You may then dial extension numbers to reach internal parties or access any other feature available from the auto attendant.

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 69 621-00000121

If you have new, or previously heard but not saved or deleted, voice

Pressing the * key from the main voice mail menu will send you to the

Page 84

Dialing Your Telephone

1. Call your telephone number.

NOTE:

to use this method.

2. Wait for your phone to forward to your voice mail mailbox.

3. Press the * key.

4. You will be prompted to enter your password.

5. Enter your numeric password, followed by the # key.

NOTE:

main auto-attendant menu. You may then dial extension numbers to reach internal parties or access any other feature available from the auto attendant.

You must be able to dial your number directly from outside the system

If you have new, or previously heard but not saved or deleted, voice

Pressing the * key from the main voice mail menu will send you to the

…from the email program on your PC

1. Open your email reader.

2. Open the email message containing the voice mail.

3. Open the attachment in the email message.

• If this is the first time you have opened a voice mail in your email

applicaton, you will be asked to associate the file type to the media player you wish to use to listen to the voice mail file type.

4. Your default media player will open.

• If you get an error message, the voice mail has not been recorded in a

compatible file format and cannot be played.

5. Select “open the file” on the dialog box that appears to play the message

NOTE:

music CDs or streaming music) coming from your speakers. Stop or mute other features before playing the voice mail message to increase the clarity of the message. DO NOT mute the other applications by clicking on the speaker in the Windows System Tray since this will mute the speakers for all sources, including the voice mail you are trying to play. Also remember to check the volume level on your speakers before playing any voice mail messages.

The voice mail message plays concurrently with any audio (such as

6. Close the media player when you are finished listing to voice mails.

70 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 85

Using Controls While Playing Messages

The system provides you with the following message control options:

Rewind/Fast Forward

While listening to a message follow these steps:

• Press 7 to skip back in 5 second increments.

• Press 9 to skip forward in 5 second increments.

• Repeat the process to further rewind or fast forward.

Rewind to the Beginning of a Message

If you want to return to the beginning of the message:

• Press 77.

Fast Forward to the End of a Message

If you want to forward to the end of a message:

• Press 99.

Pause Play of a Message

To pause play of a message or to resume play of a paused message:

• Press 8.

Composing Messages before Sending

The compose feature of the voice mail system allows you to record a message and review or change it before sending it to any number of users or distribution groups. You first enter the extensions and distribution group numbers of the recipients and then record and send your message.

Compose and Send a Message

1. Access the voice mail system.

2. Press 7 to select compose a message.

3. Enter the extensions and group numbers of those persons you want to receive

the message followed by the # key.

4. When you are finished, press # again to complete your mailing list.

5. Record your message after the tone and press # when finished.

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 71 621-00000121

Page 86

6. You are prompted to perform one of the following:

• Press 1 to send

• Press 2 to change

• Press 3 to review (your message is played back to you)

• Press 4 to set message options

• Press * to return to the voice mail main menu

7. Press a number to act on your message.

• If you pressed 1, your message is sent and voice mail disconnects.

• If you pressed 2, your are returned to the prompt to record your message.

Record again and follow the prompts.

• If you pressed 3, your message is played back to you and you are then

prompted to perform an action from the previous list.

• If you pressed 4, go to step 8.

8. Press a number to set any message delivery options.

• Press 1 to mark the message as urgent

• Press 2 to mark the message as private

• Press 3 to mark the message as return receipt requested (you want to be

notified when the recipient access the message)

• Press 4 to clear message options

• Press * to return to the voice mail main menu

9. If you pressed any key from 1 -4, you are returned to the Compose Message menu (step 6).

10. Repeat steps 6 - 8 until you press 1 to send or * to return to the voice mail main menu or hang up.

Marking a Message as Urgent

To mark a message as urgent, which places it in the recipient(s) mailbox before any regular messages, follow these steps:

1. Record a message.

2. Press #.

3. Press 9 to mark as urgent and send.

NOTE:

messages marked as urgent will automatically notify of the recipient that they have an urgent voice message.

If your system administrator has turned on message notification,

72 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 87

Changing Your Password

The system default for your voice mail password is your extension number. To keep others from listening to your voice mail messages, you should change your password to something only you know.

1. Access the voice mail system.

2. Press 3 to change your password.

3. Enter your new password by pressing numbers on the keypad followed by #.

4. Enter your new password again. A prompt will tell you if you have successfully

changed your password.

NOTE:

and change your password, press * to get the main menu, then follow the above steps. Otherwise listen to your messages and then follow the above steps.

1. Skipping the Mail Menu to Hear Messages

To immediately begin listening to voice mail, press # during the voice mail menu announcement.

If you have messages in your voice mail box, but you want to skip them

Returning to the Auto Attendant or Operator

When calling from outside of the VoIP system, you can escape from voice mail to the auto attendant or operator using the star (*) key. Press * to move from the selected option to the previous menu. When you reach the main voice mail menu, press * to transfer to the main number or operator, depending on your system configuration.

Zeroing Out to a Custom Operator

When callers reach your voice mail, you can give them the option to leave a message or dial zero (0) and reach your custom operator (which may be the auto attendant or another phone number). By default, the system will route callers to the auto attendant when they press zero. You can change the destination from the voice mail main menu.

TIP:

When you record your greetings, be sure to tell callers than they can press zero (0) to be transferred to the auto attendant or to your designated alternate phone number.

NOTE:

To hear or change where pressing zero (0) goes, follow these steps:

1. Access the voice mail system.

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 73 621-00000121

This feature is not supported for stand-alone mailboxes.

Page 88

2. Press 8 to hear or change your custom operator selection.

3. You should hear an announcement that your custom operator is a phone

number you previously programmed or the default selection.

NOTE:

effect.

4. Do one of the following:

If a custom operator is not available, you will hear a message to that

• Press 1 to change your custom operator number, see step 5.

• Press 2 to restore the default custom operator, see step 6.

• Press * to return to the voice mail main menu, see step 7.

5. If you pressed 1, enter your custom operator number, press # and listen to the confirmation announcement.

6. If you pressed 2, listen to the announcement that your default custom operator has been restored.

7. If you pressed *, listen to the voice mail main menu.

NOTE:

match your 4-, 5- or 6-digit plan, or a valid outside number, including all necessary access and area code numbers), cannot be the same extension as your mail box, and you must be able to dial the number entered from your phone. You will receive an error message if you enter an invalid number or are not allowed to enter a long distance number as your custom operator.

TIP:

enter a long distance number as the custom operator without the access codes, the system will accept the digits, but when the caller presses zero (0), the call will be disconnected.

Entered numbers must match a valid dial plan (i.e., extensions must

If you cannot make long distance calls from your phone and attempt to

Replaying a Message

To replay a voice mail message, press 7.

Saving a Message

To save a voice mail message, press 5.

NOTE:

saved messages, and is unavailable until you exit and re-enter voice mail.

When you save a voice mail message, the message is moved to the

Skipping to the Next Message

To skip to the next voice mail message, press 8 while.listening to the message header or message handling options. During the message, press # to skip to the next message.

74 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 89

Deleting a Message

To delete a voice mail message, press 4.

NOTE:

the caller ID and message received information (date, time, etc.) remains in the inbox listing until you exit voice mail.

When you delete a voice mail message, the message is deleted, but

Forwarding a Message to Another Mailbox

To forward a voice mail message to another mailbox, follow these steps:

1. Press 6.

NOTE:

whom you want to forward the message.

2. Enter the extension digits and then either:

3. You get a prompt to leave an introduction to the forwarded message:

NOTE:

message, press # immediately after the prompt.

You hear a prompt to enter the extension number of the person(s) to

• press # to enter another extension or,

• press ## if this is the only (or last) person to receive the forwarded

message.

a. Record your introductory message.

To forward the voice mail immediately without an introductory

b. Press # to accept the message.

4. Choose one of the following options to finish forwarding:

• Press 1 to forward the message.

• Press 2 to change the introductory message.

• Press 3 to review the introductory message.

• Press 9 to mark urgent and forward.

• Press * to cancel the forward.

NOTE:

reenter the extension(s) and any desired introduction.

Press * at anytime to cancel the forward. If you press *, you must

Replying to a Message

To reply to a message you receive:

1. Press 2 to reply to the message.

You hear a prompt to record your reply.

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 75 621-00000121

Page 90

2. Record your reply message.

3. Press # to accept your message.

Your voice mail system gives you the following options:

• Press 1 to send reply.

• Press 2 to change reply.

• Press 3 to review reply.

• Press 9 to mark urgent and reply.

• Press * to cancel the reply and re-record.

You hear the message options again.

Dialing Back a Caller

To dial a caller who left a message (if Caller ID information is available):

Press 3.

Sending a Message Directly to an Extension

You can send a voice mail message directly to an extension without dialing their extension and having to wait for the call to roll to the voice mail system.

To go directly to someone’s voice mail box:

1. Dial 577 (or the code provided by your system administrator) on the keypad. You hear a voice prompt to enter the extension number of the person you want to send a message to.

2. Dial the extension number. You hear a greeting and voice prompt to enter a message.

3. Record your message and hang up.

NOTE:

to the end of it.

You can press * on your phone at any time during the greeting to skip

Personal Greetings

You can record a different voice mail greeting for each of the conditions that transfers a caller to your voice mailbox:

• when your phone rings and you don’t answer it (the “No Answer” greeting)

• when you have activated the Do Not Disturb feature (if this feature is

provided on your telephone)

• when you are talking on the phone (the “Busy” greeting)

76 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 91

Additional features include the ability to:

• Record your name so that when you leave messages for other users, they

will hear your name instead of your extension.

• Replace your personal greetings with the default greetings.

TIP:

When you create your greeting be sure to tell the caller they can dial zero (0) to reach either the automated attendant or the person you have programmed to answer “zero out” calls.

Recording Personalized Mailbox Greetings

To record a personalized greeting:

1. Access the voice mail system.

2. Press 5 from the main voice mail menu and choose the greeting you want to

record by pressing the corresponding digit key.

• Press 1 to record the No Answer greeting.

• Press 2 to record the Do Not Disturb greeting.

• Press 3 to record the Busy greeting.

• Press 4 to record your name.

• Press 5 to replace your personal greetings with the default greetings.

• Press * to return to the main menu.

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 77 621-00000121

Page 92

Listening to Your Greetings

You may want to check your personalized greetings to make sure they are still appropriate.

1. Access the voice mail system.

2. Press 4 from the main voice mail menu and choose the greeting you want to

play by pressing the corresponding digit key.

• Press 1 to play the No Answer greeting.

• Press 2 to play the Do Not Disturb greeting.

• Press 3 to play the Busy greeting.

• Press 4 to play your name.

• Press * to return to the main menu.

Receiving Pager Notification

The VoIP system provides the ability for you to be alerted on your mobile phone or pager that you have received a voice message. You must set this service up with your system administrator.

Mobile devices support different types of alerts:

• Basic numeric pages accept only keypad phone digits (1-0, * and #).

• Cell phones support voice streaming.

• Some cell phone models can receive text-only e-mails.

• E-mail pagers can accept text-only e-mail messages.

You may choose to be alerted:

• Each time you receive any voice message.

• Only when you receive a message marked as urgent.

What You Receive on Your Pager/Cell Phone

Numeric - You receive the numbers you entered in the Pager Info box; when you

set up the pager option with the system administrator. The number could be a code that means something to you.

Voice - when you answer the page, voice mail plays a welcome announcement followed by a request for the account password. Enter the password and listen to the normal voice mail menu options. If the voice message is marked as "Urgent", the first voice message you receive is the urgent message.

78 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 93

When someone leaves a voice mail message on your phone, the system immediately dials your pager or cellular phone. The system tries to reach you every five minutes, up to three times if you don’t answer. If you take the call, but you don’t enter digits at the prompt, the system acts like you never answered the call and continues trying to reach you as stated above. If you have caller id, your “office” phone number/name is displayed as the caller.

E-Mail -The message you receive, reads as follows:

Subject: Voice Mail from calling party

Body: the text entered by the system administrator (i.e. Please call me! I need to talk to you.)

NOTE:

body: calling party called you on “date” at “time”.

If the system administrator left the body text empty, you get as the

Managing Distribution Groups

Voice messaging distribution groups can be created as either personal or corporate groups. Up to 20 personal groups can be created by individuals for their own use while up to 70 corporate groups can be created.

Corporate (customer) distribution lists are created by an administrator or a user with access to a customer’s main number voice mail box and are available for use by all of a customer’s users. By default, corporate group number 10 in each customer partition is named “Everyone”, includes all mailboxes within a company and is available to all users. The “Everyone” group is updated whenever a mailbox assigned to the customer partition is added or deleted.

The following options are available when you access the distribution groups menu item:

• List all distribution groups

• Create a group

• Edit a group

• Delete a group

• Return to the main menu

Creating a New Group

1. Access the voice mail system.

2. Press or click 6 for distribution groups.

3. Press or click 3 to create a group.

4. Enter the number of the group to be created and record the name of the group.

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 79 621-00000121

Page 94

• The group number must be from the allowed range and cannot already

exist as a group.

• If the voicemail account is corporate, then allowed range is 10-79.

• If the voicemail account is personal, then the allowed range is 80-99.

5. Press # to confirm or * to cancel.

6. Enter the extension number of one of the members of the group.

7. Press # key.

8. Repeat steps the previous two steps until all members are added.

9. Press the # key again.

TIP:

A group can be created without any members in it. Members can be added later by using the edit menu to add members. To create a group with no members, follow the previous steps with one exception. When prompted to enter members, just press or click the # key.

NOTE:

in the mailbox for your company's main number.

To create group (corporate or company) distribution lists, you must be

Editing or Modifying a Group

1. Access the voice mail system.

2. Press or click 6 for distribution groups.

3. Press or click 2 to edit a group.

4. Enter the number of the group to be edited.

5. Press a number to select an option from the edit menu:

• List all members - press 1

• Add a member - press 2

• Delete a member - press 3

• Play the group name - press 4

• Change the name - press 5

• Go back to the previous menu - press *.

NOTE:

does not exist, Please try again.”

If the group does not exist, the user will hear “The group number xx

NOTE:

the mailbox for your company's main number.

To edit group (corporate or company) distribution lists, you must be in

Listing All Group Members

If you pressed 1 for a list of all distribution group members, the following happens:

1. The total number of members in the group is announced.

80 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 95

2. The extension of each member is announced.

3. Press # to skip to the next entry in the list before the number being announced

is finished.

Adding a Member to the Group

If you pressed 2 to add a distribution group member, do the following:

1. After the prompt, enter the extension number of the member you wish to add.

2. Press or click the # sign.

• The extension number you entered is played back to you for confirmation.

3. Press the # key to add the user or * key to cancel.

• If you press # and the member does not exist, you will hear “The member

has been successfully added to this group.”

• If you press # and the member already exists, you will hear “The member

already exists in this group, please try again.”

• If you press *, you will be asked to reenter the extension number to add.

Deleting a Group Member

If you pressed 3 to delete a distribution group member, do the following:

1. After the prompt, enter the extension number of the member you wish to

delete.

2. Press or click the # sign.

• The extension number you entered is played back to you for confirmation.

3. Press the # key to delete the user or * key to cancel.

• If you press # and the member exists, you will hear “The member has

been successfully deleted from this group.”

• If you press # and the member does not exist, you will hear “The member

does not exist in this group, please try again.”

• If you press *, you will be asked to reenter the extension number to

delete.

Playing the Group Name

After accessing the voice mail system, if you pressed 4 to play the name of the distribution group, the voice mail system plays the previously recorded name of this group. If there is no recording for this group, you will hear “Unknown.”

Changing the Group Name

If you pressed 5 to change the name of the distribution group, do the following:

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 81 621-00000121

Page 96

1. The voicemail system plays the prompt:

“Please record the name for this group after the tone, when your recording is complete press the # key.”

2. Record the new name for the group.

3. Press or click the # sign.

NOTE:

in the mailbox for your company's main number.

To delete group (corporate or company) distribution lists, you must be

Deleting a Group

1. Access the voice mail system.

2. Press or click 6 for distribution groups.

3. Press or click 4 to delete a group.

4. Enter the number of the group to be deleted.

5. Press # to confirm this is the correct group or * to reject the group.

If you entered the wrong group number and pressed *, you will be prompted for the number of the group to delete. Enter a different group number or press * again to return to the distribution group menu.

6. Press # to finish the delete or press * to cancel the delete process and return to the distribution group menu.

NOTE:

in the mailbox for your company's main number.

To delete group (corporate or company) distribution lists, you must be

Listening to a List of Distribution Groups:

1. Access the voice mail system.

2. Press or click 6 for distribution groups.

3. Press or click 1 to list all your groups.

4. Listen to the playback of your groups as follows

• the number of groups

• the group number

• the group name

• If there is no recording for the group name, you will hear “Unknown”.

• The corporate group 10 will always be named as “Everyone”.

• the total number of members in the group.

82 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 97

While reviewing the list of groups, you can skip to the next group by pressing or clicking the # button.

NOTE:

in the mailbox for your company's main number.

To list all group (corporate or company) distribution lists, you must be

Exiting the Voice Mail System

To exit the voice mail system, simply hang up.

Swiss Voice Telephone User Guide Voice Mail Features (Default Menu) 83 621-00000121

Page 98

84 Voice Mail Features (Default Menu) Swiss Voice Telephone User Guide

621-00000121

Page 99

Chapter 5 Voice Mail Features (Option A Menu)

You can access the voice mail system on your phone by pressing *09 or by pressing the F4 (Voice Mail) button.

Menus and Commands

The following commands allow you to access your voice mail system.

Access Code Function

Top Menu

1 Play inbox messages

2 Compose a message

3 Play saved messages

4 Playback personal greetings

5 Record personal greetings (for options see “Voice Mail Personal

6 Access personal distribution groups (for options see “Voice Mail

7 Change password

Table 9: Voice Mail Menu Keys

Greeting List” on page 86)

Distribution List” on page 87)

Swiss Voice Telephone User Guide Voice Mail Features (Option A Menu) 85 621-00000121

Page 100

Table 9: Voice Mail Menu Keys

Access Code Function

8 Hear or change custom operator number

(Not supported for stand-alone mailboxes) [for options see “Voice Mail Custom Operator (Zero Out) List” on page 88)

* (star) Exit the voice mail system

Play Control Keys

* (star)

• When pressed while sender, date, and time information

(message header) is playing, returns to Alternate Voice Mail Top Menu

• When pressed while message is playing, returns to message

header.

• When pressed while message header is playing, goes to

directly to the message.

• When pressed while message is playing, goes to Message

Handling Message Control Menu.

1 Rewind

11 Rewind to the beginning

2 Pause/Resume

3Fast Forward

33 Fast Forward to the end

Message Handling Message Control Menu

* (star) Return to Alternate Voice Mail Top Menu

# Next message

4 Replay message

6Forward

7 Delete

8 Reply

9Save

88 Call originator

Table 10: Voice Mail Personal Greeting List

Access Code Function

1 No Answer greeting

2 Do Not Disturb greeting

3 Busy greeting

86 Voice Mail Features (Option A Menu) Swiss Voice Telephone User Guide

621-00000121

Swissvoice IP-10 User Manual

Table of Contents

Introduction

Accessing Phone Features

In This Manual

Telephone Description

Swiss Voice Telephone User Guide Your SwissVoice Telephone 1 621-00000121

SwissVoice IP 10 Features Table

Moving Your Telephone

Adjusting the Volume

Answering a Call

Displaying Line Button Layout

Making a Call

Swiss Voice Telephone User Guide Basic Phone Features 5 621-00000121

…using the Handset

…using the Loudspeaker

…using the Keypad

Making a Second Call

Phone Configuration

Admin settings Menu

User settings Menu

Alarm

Date Setting

Display Contrast

Headset Enable/Disable

Idle Display Text

Language

Password

Personal Voice Mail Number

Reset

Ringing Tones

Username and Password

Using a Headset

Using the Loudspeaker

Loudspeaker Troubleshooting

Feature Activation Digit

Abbreviated Dial

Creating an Abbreviated Dial Code

Swiss Voice Telephone User Guide System Telephone Features 13 621-00000121

Using an Abbreviated Dial Code

Modifying an Abbreviated Dial Code

Deleting an Abbreviated Dial Code

Verifying an Abbreviated Dial Number

Anonymous Call Rejection

Enabling Anonymous Call Rejection

Disabling Anonymous Call Rejection

Authorization Code Calling

Billing Codes

Blind Transfer

Call Back Queuing

Call Block (Selective Call Rejection)

Enabling/Disabling Call Block

Blocking Number of Last Call Received

Adding Numbers to Call Block List

Listing Blocked Numbers

Deleting Numbers from Call Block

Call Forward (All Calls)

Enabling Call Forward (All)

…using the Phone

…using Star Codes

Disabling Call Forward (All)

…using the Phone

…using Star Codes

Call Forward (Busy)

Enabling Call Forward (Busy)

Disabling Call Forward (Busy)

Call Forward (No Answer)

Enabling Call Forward (No Answer)

Disabling Call Forward (No Answer)

Call Forward (Out of Service)

Enabling Call Forward (Out of Service)

Disabling Call Forward (Out of Service)

Call Pickup

Directed Call Pickup

…using the Phone

…using Star Codes

Group Call Pickup

…using the Phone

…using Star Codes

Call Return