Ceramic Undermount Sink
®
w ell made for e v e r
INSTALLATION INSTRUCTIONS
www.swissmadison.com | 1-434-623-4766 | info@swissmadison.com
@SwissMadison
#WellMadeForever
CERAMIC UNDERMOUNT SINK INSTALLATION INSTRUCTIONS
PRIOR TO INSTALLATION:
· Inspect product to ensure no damages have occurred while in shipping.
· Observe all plumbing and building codes in accordance with your state and local requirements.
· Floor must be level prior to installation.
· All dimensions are nominal! Be sure to measure your sink prior to installation.
· The step-by-step guidelines in the installation instructions are a general reference. Should there be
any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss
Madison products by hiring a licensed professional.
· Read installation and maintenance instructions thoroughly before installing. Be sure to use proper
tools and always wear proper personal safety accessories for your protection.
If you have any questions or concerns please contact us:
1-434-623-4766
info@swissmadison.com
SUGGESTED TOOLS & MATERIALS:
Safety
Glasses
1. Determine Reveal Type
NOTE: This manual instructs specifically for mounting a flush reveal type. Make sure to consult
your plumber about desired reveal type prior to installation.
Adjustable
Wrench
Jig Saw
Negative: Counter edge extends past sink rim approximately 1/4”.
Liquid Nail
Drill
Tape
Measure
Gloves
Drop Cloth
Positive: Sink rim is exposed approximately 1/4” from edge of countertop.
Flush: Sink edge is flush with countertop opening.
— 1 —
CERAMIC UNDERMOUNT SINK INSTALLATION INSTRUCTIONS
2. Clean Countertop
· Make sure to thoroughly clean the underside
of the countertop and let it dry completely.
NOTE: The underside of counters tend to be
rough and unfinished which makes it easy to
hold debris. You want to make sure it’s clean
so nothing interferes with the bond between
the adhesive and the countertop.
4. Cut Countertop
·
Cut an opening in the countertop by
carefully following the traced line.
·
Please use the appropriate saw that best fits
your countertop material. A professional
should be consulted for cutting the
countertop.
3. Position and Trace Sink
· Flip sink upside down on top of countertop
in the desired location you want the sink to be.
· Trace the outline of the sink onto the countertop.
· Make sure clearance is suitable for back splash,
faucet, and plumbing for the sink.
5. Affix Countertop
· Again, clean under the countertop and cutout
area making sure it is free of debris.
· Apply liquid nail or adhesive of choice to the rim
of the sink near the inside edge. Be careful not
to miss or skip any area.
· Carefully lift sink squarely under countertop
cutout. Press firmly on sink to form seal and
seal sink. Immediately wipe excess sealant with
a damp cloth. Be careful not to smear or spread
sealant onto countertop or sink.
NOTE: Dry time is dependent upon which
adhesive you choose to use. Be sure to check
your adhesive instructions before use.
6. Install Plumbing Fixtures
·
Turn counter back over.
· Connect drain trap to drain, and water
supply connections to faucet according to
manufacturer’s instruction.
· Run water into sink and check for leaks.
— 2 —
1-434-MADISON
®
w ell made for e v e r
(623-4766)
www.swissmadison.com
ONE YEAR LIMITED WARRANTY
Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our
customers with beautiful, durable, long-lasting products. Should there be any defects in materials or
craftsmanship under regular use that are discovered within the first year of installation, Swiss Madison®
will provide replacement parts at no charge, or at its discretion, replace any product or part of the product
that is deemed defective, under normal installation, use, service or maintenance. This warranty applies
only to the original purchaser. Proof of purchase will be required in the instance of a claim.
Swiss Madison® recommends all installations of Swiss Madison® products to be conducted by a
licensed, professional plumber or contractor. Swiss Madison® will not be held responsible for any
damage or product failure due to improper installation, misuse, or failure to utilize a licensed professional
for installation. Swiss Madison® is not responsible for any installation or removal costs.
This One Year Limited Warranty Will Be Voided If:
• The installation recommendations were not followed by the installer
• The product has been moved from its initial place of installation
• The product has in any way been modified from its packaged state
• The product has been subjected to improper maintenance, abuse, misuse, excessive use of
chemicals, accidents, or other damages, etc.
Swiss Madison® makes no implication that its products comply with any local building or plumbing
codes. It is the consumer’s responsibility and obligation to determine local code compliance prior to and
during installation. This warranty extends only to the original purchaser and first consumer.
Swiss Madison® is not responsible for any special, incidental or consequential damages associated with
the installation, replacement, return or use of the original purchaser’s product. This includes, but is not
limited to: freight costs, labor, travel time, lost profit, home damages and other contingent liabilities and
costs (including, without limitation, costs associated with ‘professionals’ or ‘experts’, investigations,
audits, analyses, attorneys and any other professional/hired services).
The Swiss Madison® warranty is a comprehensive and explicit limit of liability. All items not disclosed
within the warranty are not addressable within the responsibility of Swiss Madison®. Certain states have
variances regarding implied warranties; in those situations, we remain fully compliant.
If you have any questions or concerns, please contact us directly at
1-434-MADISON (623-4766)
WARNING: Contents of your order may contain sharp and possibly other harmful pieces and may
cause hazard to children and adults. Swiss Madison® is not responsible in any way for personal
damages.
Loading...