Swisscom Trend K319 Operation Instructions Manual
1
Table of Contents
1. General Description
3
1.1 Feature
3
1.2 Accessories
3
2. Operation Instructions
4
2.1 Start-up
4
2.2 Basic Operation
4
2.2.1 Incoming Call from PSTN
4
2.2.2 Outgoing Call to PSTN
4
2.2.3 Paging from Base to Handset ( up to 5 Handset )
4
2.2.4 Intercom Call to Other Handset
5
2.2.5 Intercom Call from Other Handset
5
2.2.6 Intercom Call to Another Handset during PSTN Call
5
2.2.7 Manual Dialing, On-Line
6
2.2.7.1 Normal Dialing
6
2.2.7.2 Pre-Dialing
6
2.2.7.3 Phone Book-Dialing, by Scrolling
7
2.2.7.4 Phone Book-Dialing, by Alphabetic Retrieval
7
2.2.7.5 From Last Number Redial
8
2.2.8 Memory and Menus
8
2.2.8.1 Store Phone Book Number
8
2.2.8.2 Key-Tone
9
2.2.8.3 Ringer Volume
9
2.2.8.3.1 Handset Ringer Volume
9
2.2.8.3.2 Base Ringer Volume
10
2.2.8.4 Handset Ringer Type
10
2.2.8.5 Background Light
10
2.2.8.6 Language
11
2.2.8.7 Prefix
11
2.2.8.8 Pause Time
12
2.2.8.9 Select Base
12
2.2.8.10 Registration
13
2.2.8.11 Deregistration
13
2.2.8.12 Handset and Base number
14
2.2.8.13 R-key Function
14
2.2.8.13.1 Flash
15
2.2.8.13.2 Earth
15
2.2.8.14 PIN-code Change
15
2.2.8.14.1 Handset Pin-code
15
2.2.8.14.1.1 Handset Pin-code Change
15
2.2.8.14.1.2 Handset Pin-code, Default
16
2.2.8.14.2 Base Pin-code Change
16
2.2.8.15 Default
16
2.2.10 Phone Book Number
17
2
2.2.10.1 Edit
17
2.2.10.2 Erase One Number
18
2.2.10.3 Erase All Numbers
19
2.2.11 Others
19
2.2.11.1Occupied Line
19
2.2.11.2 Volume control
19
2.2.11.3 Battery Low
20
2.2.11.4 Battery Charging
20
2.2.11.5Out of Range
20
2.2.11.6 Number Longer than 14 Positions
20
2.2.11.6.1 In Phone Book Mode
20
2.2.11.6.2 In On-Line Mode and Pre-Dialling Mode
20
2.2.11.7 Phone Book Memory Full
20
2.2.11.8 Key Lock
21
3
1. General Description
This telephone, which is compliant to Digital Enhanced Cordless Telecommunication (DECT)
specification, is one of the most advanced European digital cordless telephone equipment.
This phone uses carrier frequencies from 1.88GHz to 1.9GHz. It also uses Time Division Multiple
Access method, so it can protect you from eavesdropping and provide the most communication.
One of the main privileges is the duplex communication between each handset via base.
1.1 Feature
•GAP compatible system
•1 Base-station can register up to 5 Handsets
•1 Handset can be registered to 4 Base-stations
•Paging from Baseset to Handsets
•Intercom call during External call
•Call waiting from PSTN
•Broker’s call (change connection to PSTN or INT which is On-Hol d)
•Transfer External call to other handset
•On hook dialing with editing function
•LCD (2 lines, 14 alpha. Numeric)
•12 numeric keys & 8 function keys
•Adjustable Ringer Volume
à up to 4 levels at Handset and Baseset (include Ringer Off)
•Adjustable Ringer Melody
à up to 4 melodies at Handset.
•Adjustable earpiece volume of handset (7 levels)
•Low Battery warning display (“Battery Low”) and out of range warning display(“Out of range”).
•Caller ID memories (10 locations)
•Phone book memories (50 locations, 24 digits and 14 characters )
•Last number redial memories (4 locations, 24 digits)
•Programmable PABX access code HKZ/AKZ (5 digits)
•Programmable dialing pause time (0 sec. / 1 sec. / 3 sec. / 5 sec. )
•DTMF dialing mode only
•Caller ID information display ( DTMF and FSK )
•Programmable Handset PIN number (8 digits)
•Programmable System PIN number (8 digits)
1.2 Accessories
•Battery
•Tel-line
•Adapter
•User’s Manual
4
2. Operation Instructions
2.1 Start-up
•Connect the power to the Base unit and Battery to the Handset correctly.
•When the Handset is placed on the charger unit, the Handset battery is charged.
•If the above procedure is completed, the Handset searches the Base.
•During searching Base
O U T O F R A N G E
•After approx. 5 sec. go to the on-line mode
•After searching Base
P H O N E B O O K
P R O G R AMMI N G
2.2 Basic Operation
2.2.1 Incoming Call from PSTN
When an incoming call from PSTN is detected in the
I N C O M I N G C A L L
Base unit, Base is ringing and talk LED on the Base is
blinking, and all Handsets that are not busy are ringing
and displaying the message. If the Caller ID is detected, Calling Party Number will be displayed.
•Press the TEL-key
Or
•Cradle off if the handset is on the charger unit.
All other Handset will stop the ringing.
2.2.2 Outgoing Call to PSTN
•Press the TEL-key
T E L - N U M B E R
You can see the message and after then hear
the dial tone.
•Enter the dialing number < 0~9, R, *, # >
T E L - N U M B E R
1234567
And then you can have co nversation.
•If the charge pulse is supplied by user network
T E L - N U M B E R
provider, the current charge will be displayed.
1. 20
If another Handset are doing PSTN call already, the
L I N E B U S Y
busy tone will be heard.
2.2.3 Paging from Base to Handset ( up to 5 Handsets )
The Handset can be ringed by pressing Paging-key at the Base.
•Press Paging-key at the Base
5
All Handsets are ringing during 30 sec. If no answer
P H O N E B O O K
From Handset within 30 sec, paging will be stopped.
P R O G R AMMI N G
•To cancel this mode, press Paging-key at the Base or TEL-key at the Handset
All Handsets stop ringing
¡Ø REMARKS
Paging is only possible when the Base is idle.
2.2.4 Intercom Call to Other Handset
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
•Press INT-key
I N T E R C O M N O :
•Key-in Intercom number.
I N T E R C O M N O : 3
•Press TEL-key to disconnect.
P H O N E B O O K
•Call time display during 3 sec.
01: 35
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
2.2.5 Intercom Call from Other Handset
When the handset receives the intercom call from other
I N T E R C O M
Handset, then ringi ng and display the calling handset
1
Number (1, 2, 3, 4, 5)
•Press TEL-key to connect the intercom call
•Press TEL-key to disconnect the intercom call
2.2.6 Intercom Call to Another Handset during PSTN Call
•On line mode
T E L - N U M B E R
0 9 0 1 2 3 4 5 6 7
•Press INT-key
I N T E R C O M N O :
•Key-in Intercom number
I N T E R C O M N O : 3
•Press INT-key to retrieve PSTN call
6
•Or press TEL-key to transfer the call to other
T E L - N U M B E R
Handset
0 9 0 1 2 3 4 5 6 7
•Call time display during 3 sec.
P H O N E B O O K
01: 35
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
¡Ø REMARK During one Handset is doing the PSTN call, Intercom call is possible between two of
other handsets registered.
2.2.7 Manual Dialling, On-Line
2.2.7.1 Normal Dialing
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
•Press TEL-key
T E L - N U M B E R
Shown when dial tone is heard
•Enter the dialing number < 0~9, R, *, # >
T E L - N U M B E R
1234567
2.2.7.2 Pre-Dialing
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
•Enter the dialing number <0~9, -, #, * >
T E L - N U M B E R
•Press Pause(R/-)-key after dial i ng number if you
020-87654321
want to enter dialing pause. The dialing pause ‘-’ is
displayed.
•Press TEL-key
T E L - N U M B E R
020-87654321
•The call will be processed.
T E L - N U M B E R
020-87654321
•On-line
T E L - N U M B E R
020-87654321
•Call time display during 3 sec.
P H O N E B O O K
01: 35
7
•Disconnect Press TEL-key
P H O N E B O O K
•Stand-by
P R O G R AMMI N G
2.2.7.3 Phone Book-Dialing, by Scrolling
You can dial stored dial number.
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
•Press Down-key one time
P H O N E B O O K
P R O G R A M M I N G
•Press OK-key
C U R T
1 2 3 4 5 6 7 8
•Press TEL-key when desired number is shown
C U R T
1 2 3 4 5 6 7 8
•This message is displayed, when the end of phone
book is reached by pressing the Up/Down key.
E N D O F L I S T
•Press TEL-key to disconnect.
P H O N E B O O K
•Call time display during 3 sec.
01: 35
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
2.2.7.4 Phone Book-Dialing, by Alphabetic Retrieval
•Stand-by
P H O N E B O O K
P R O G R AMMI N G
•Press Down-key one time
P H O N E B O O K
P R O G R A M M I N G
•Press Key corresponding to the first character in
C U R T
The Name
1 2 3 4 5 6 7 8
•Press TEL-key when desired number is shown
C U R T
1 2 3 4 5 6 7 8
•Press TEL-key to disconnect.
P H O N E B O O K
•Call time display during 3 sec.
01: 35
Loading...