Page 1
HD-Phone
Connect the new fibre optic c able to
the Internet-Box.
Connect the fibre optic cable to the
fibre optic socket.
Switch on the Internet-Box and wait
5 minutes.
Installation over view
Follow the steps below to convert your existing Internet-Box to fibre optic
technology.
Remove the protection caps and connect the blue end of the cable into the
Inte rnet- Box .
The cable is sensitive, so please do not touch it at either end!
Push in the fibre optic module (clip facing up) into the «fibre» insert until it
clicks in.
Insert the fibre optic module.
The package includes:
Connect your telephone.
(This only applies if you are a fixed network subscriber.)
Connect your computer and open your
Internet browser.
Now only connect your telephone and / or fax machine to the
Intern et-Box (phone 1 and 2) – and not the telephone socket as before.
Use the black telephone adapter if necessary.
Connect the computer per Ethernet cable or to your existing WLAN. Open
www.bluewin.ch in the Internet browser and, if the registration page is
displayed, complete all compulsory fields step by step. If the page is not
displayed, continue with step 8. After 5 minutes continue with step 7.
Open the slot on the fibre optic socket that we specified to you per letter.
This is generally slot 2, rarely slot 1. Remove the protective cap and connect
the green cable end.
HD-Phone
> Internet-Box: press +
button
> Start your HD-Phone and select connection mode
N.B. Please note that conventional DECT cordless phones
cannot be wirelessly connected to the DECT base station
integrated into the Internet-Box, but must be directly inserted
into the «phone 1» or «phone 2» ports.
Convert your
existing
Internet-Box
to fibre optic
technology
Internet-Box fibre-optic kit setup
www.swisscom.ch/internetbox-help
Swisscom (Switzerland) Ltd
Contact Center
CH-3050 Bern
www.swisscom.ch
0800 800 800
Telephone adapter
Fibre optic cable
Fibre optic module
Internet-Box stand ard
Internet-Box plus
If your router looks like this,
follow the instructions on the
reverse.
Optionally:
Wireless HD-Phone connections
You can connect the HD-Phones from Swisscom wirelessly with the
Internet-Box. For information about HD-Phones from Swisscom please
visit www.swisscom.ch/hdphones
Continue you with step 1 if your router is the same as the one on the
installation over view.
You are now surfing with fibre optic technology!
Switch off the Internet-Box and
remove the DSL cable.
You can return old devices to Swisscom for recycling free of charge.
A return label is included on the delivery slip.
Remove your old Internet / telephony
installations (if any).
1 2 3
789
4
10
11
5
6
Start
Page 2
HD-Phone
HD-Phone
KKD+JM (RES-CWE-UID) 10203081 12/2015 EN
Connect the new fibre optic c able to
the Internet-Box.
Connect the fibre optic cable to the
fibre optic socket.
Switch on the Internet-Box and wait
5 minutes.
Installation over view
Follow the steps below to convert your existing Internet-Box to fibre optic
technology.
Remove the protection caps and connect the blue end of the cable into the
Inte rnet- Box .
The cable is sensitive, so please do not touch it at either end!
Push in the fibre optic module (clip facing up) into the «fibre» insert until it
clicks in.
Insert the fibre optic module.The package includes:
Connect your telephone.
(This only applies if you are a fixed network subscriber.)
Connect your computer and open your
Internet browser.
Now only connect your telephone and / or fax machine to the
Intern et-Box (phone 1 and 2) – and not the telephone socket as before.
Use the black telephone adapter if necessary.
Connect the computer per Ethernet cable or to your existing WLAN. Open
www.bluewin.ch in the Internet browser and, if the registration page is
displayed, complete all compulsory fields step by step. If the page is not
displayed, continue with step 8. After 5 minutes continue with step 7.
Open the slot on the fibre optic socket that we specified to you per letter.
This is generally slot 2, rarely slot 1. Remove the protective cap and connect
the green cable end.
> Internet-Box: press +
button
> Start your HD-Phone and select connection mode
N.B. Please note that conventional DECT cordless phones
cannot be wirelessly connected to the DECT base station
integrated into the Internet-Box, but must be directly inserted
into the «phone 1» or «phone 2» ports.
Convert your
existing
Internet-Box
to fibre optic
technology
Internet-Box fibre-optic kit setup
www.swisscom.ch/internetbox-help
Swisscom (Switzerland) Ltd
Contact Center
CH-3050 Bern
www.swisscom.ch
0800 800 800
Telephone adapter
Fibre optic cable
Fibre optic module
Internet-Box stand ard
Internet-Box plus
You can return old devices to Swisscom for recycling free of charge.
A return label is included on the delivery slip.
Remove your old Internet / telephony
installations (if any).
Switch off the Internet-Box and
remove the DSL cable.
If your router looks like this,
follow the instructions on the
reverse.
Optionally:
Wireless HD-Phone connections
You can connect the HD-Phones from Swisscom wirelessly with the
Internet-Box. For information about HD-Phones from Swisscom please
visit www.swisscom.ch/hdphones
Continue you with step 1 if your router is the same as the one on the
installation over view.
You are now surfing with fibre optic technology!
2 3
789
4
10
11
5
6
Start
1
Loading...