Swisscom Aton CL116, Aton CLT116 User Manual

Download

Page 1

Aton CL 1 16 - C LT 116

User manual

Page 2

Page 3

Overview of handset

i Ã

07:15

INT 1 14 Oct

Calls Calendar

1 Display in idle status 2 Status bar (

¢ page 52)

Icons display current settings and operating status of the phone

3 Display keys (

¢ page 17, ¢ page 31)

4 Message key (

¢ page 18)

Access to the calls and message lists; Flashin g: new message or new call

5 End call key, On/off key

End call; Cancel function; Go back one menu level (press briefly); Back to idle status (press and hold); Switch handset on/off (press and hold in idle status)

6 Hash key

Keypad lock on/off (press and hold in idle status); Toggles between upper/lower case and digits; Insert a dialling pause (press and hold)

7 Microphone 8 Recall key

Consultation call (flash) (press and hold)

9 Star key

In idle status: Ringtone on/off (press and hold); With an open connection: Switch from pulse dialling to tone dialling (press briefly); When inputting text: Open special characters table

10 Connection socket for headset

(

¢ page 13)

11 Key 1

Select answer machine (Aton CLT116 only)/ network mailbox (press and hold)

12 Answer call key / Handsfree key

Dial number displayed; Accept call; Switch from earpiece to handsfree mode; Open the redial list (press briefly); Start dialling (press and hold);

13 Control key / Menu key (

¢ page 16)

Overview of handset

Page 4

Overview of base station

Aton CLT116 base station

1 Display

Lit up: The answer machine is activated. The number

of saved messages is displayed. 00 flashing: The answer machine is recording a message. Flashing slowly: There are new messages. The number of new messages is displayed. 99 flashing quickly: The answer machine is full.

2 On/Off/Playback/Stop key

Switch answer machine on/off (press and hold); Play new messages if available, or play back old messages/cancel playback (press briefly).

During playback:

3 Forward key

Go to the next message.

4 Back key

Press briefly: Skip to previous message during time stamp playback; Skip to the start of the current message during message playback (< 5 secs); Skip back 5 seconds (> 5 secs) during message playback. Press and hold: Go to the start of the message.

5 Volume adjustment

Adjust volume during message playback:

÷ = quieter; ø = louder.

When an external call is displayed: Adjust the ringtone volume.

6 Delete key

Delete current message.

7 Registration/paging key

Locate handsets ("Paging") (press briefly)

¢ page 40.

¢ page 39.

Note

If the answer machine is being operated from a handset or if it is recording a message (00 flashing), it cannot be operated from the base at the same time.

Page 5

Aton CL116 base station

Overview of base station

Registration/paging key

u Locate handsets ("Paging") (press briefly) u Register handsets and DECT devices (press and hold)

¢ page 39.

¢ page 40.

Page 6

Contents

Overview of handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Overview of base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Environmental benefits of the Aton CL116/CLT116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Understanding the operating steps in the user guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Getting to know your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adjusting the telephone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating a repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changing the system PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Restoring phone to default setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ECO DECT (Eco Mode plus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Answer machine (Aton CLT116) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network mailbox (Combox) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phonebook (Address book) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contactability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Baby monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating the telephone on a router/PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Menu tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty/Maintenance/Repair/Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Faults and self-help with troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . 7

. . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . 26

. . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . 32

. . . . . . . . . 32

. . . . . . . . . 33

. . . . . . . . . 34

. . . . . . . . . 38

. . . . . . . . . . . . . . . 39

. . . . . . . . . 42

. . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . . 45

. . . . . . . . . . . . . . . . . . . . . 46

. . . . . . . . . . . . . . . . . . . 48

. . 50

. . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . 54

. . 56

. . 57

. . . . . . . . . . . . . . . . . . . . . 63

. . . . . . . . . . . . . . . . . . . . . 64

Page 7

Safety precautions

Warning

Read the safety precautions and the user guide before use.

Explain their content and the potential hazards associa children.

Safety precautions

ted with using the telephone to your

Only use the mains adapter supplied, as indicat

Only use the re in significant health risks and personal injury.

Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your particular environment e.g., doctor's surgery. If you use a medical device (e.g. a pacemaker), please contact the device manufacturer. They will be able to advise you reg external sources of high-frequency energy. Please refer to the “Appendix” chapter for the specifications of this Aton product.

Do not hold the rear of the handset to your ear when it is ringing or when handsfree mode

is activated. Otherwise you risk serious and permanent damage to your hear-

ing.

Your telephone is compatible with the majorit ket. However, perfect function with a

The handset may cause an unpleasant humming or whistling noise in hearing aids or caus supplier.

Do not install the base or charging cradle in and charging cradle are not splashproof.

Do not use your phone in environments with a potential explosion hazard (e

.g. paint shops).

If you give your telephone to someone else, make sure you also give them the

er guide.

commended, rechargeable batteries as this could otherwise result

ll hearing aids cannot be guaranteed.

e them to overload. If you require assistance, please contact the hearing aid

ed on the underside of the base.

arding the susceptibility of the device to

y of digital hearing aids on the mar-

bathrooms or shower rooms. The base

Please remove faulty bases from use or have them repaired by our Service department, as they could interfere with other wireless services.

Page 8

Environmental benefits of the Aton CL116/CLT116

Information about disposal

Batteries should not be disposed of in gene waste disposal regulations, details of which can be obtained from your local authority or the dealer you purchased the product from.

At the end of its service life, this product must not be disposed of with normal h

ousehold waste, but must be handed in at the place of purchase or at a collection point for recycling electrical and electronic devices in accordance with the ordinance governing the return, acceptance and di equipment (VREG).

The materials can be recycled according to their identification. By reusing and recycling materials along with other methods of recycling used equipment, you can ma

ke an important contribution to protecting the environment.

ral household waste. Observe the local

sposal of electrical and electronic

Please note

u Not all of the functions described in this user guide are available in all countries. u The device cannot be used in the event of a power failure. It is also not possible to trans-

mit emergency calls.

Environmental benefits of the Aton CL116/CLT116

Your telephone has a low level of energy consumption and reduces radiation.

Reduced power consumption

Your telephone has a power-saving adapter plug and uses 60% less power than standard devices. Power consumption in standby mode is approx. 1.3 watt.

Minimal radiation

Your telephone with its preset ECO DECT (Eco Mode plus) switches off all radiation when in idle status. During a call, the handset reduces the transmission power according to the distance from the base station.

In addition, you also have the option of further reducing the transmission power of your telephone during a call by reducing the range.

Detailed information

¢ page 33.

Page 9

Getting started

Checking the contents of the package

u One base station, u One power adapter for the base, u One phone cord, u One handset, u One battery cover (rear cover for the handset), u Two batteries, u One belt clip, u One user guide.

If you have purchased a model with multiple hand batteries, a battery cover, a belt clip and a charging cradle with power adapter for each additional handset.

Setting up the base station and charging cradle (if included)

The base and charging cradle are designed for use in closed, dry rooms in a temperature range of +5°C to +45°C.

¤ Set up the base on a level, non-slip surface at a central point in the building or house, or

mount the base on the wall (

The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of diff

erent varnishes and polishes used on today's furnishings, marks on the surfaces cannot be

completely ruled out.

Notes

u Never expose the telephone to the effects of heat sources, direct sunlight or other

electrical devices.

u Protect your telephone from moisture, dust, corrosive liquids and fumes. u Pay attention to the range of the base. This is up to 40 m inside buildings and up to 250 m

in unobstructed outdoor areas. The range is reduced when Maximum Range is deacti-

¢ page 33).

vated (

¢ page 8).

sets, the package should contain two

Page 10

Getting started

123

Aton CLT116

Aton CL116

approx. 2 mm

Aton CL116: 29 mm

Aton CLT116: 60 mm

Connecting the base station to the telephone network and the mains power supply

¤ Insert the phone cable into the con-

nection socket at the rear of the base until it clicks into place and feed under the cable protection.

¤ Insert the power cable for the power

adapter into the connection socket

at the rear of the base and rotate the right-angle plug under the cable protection.

¤ Connect the power adapter . ¤ Connect the phone jack .

Notes

u The power adapter must always be connected, as the phone will not operate without a

power supply.

u Use only the supplied power adapter and phone cord. Pin connections on telephone

cables can vary (pin connections,

¢ page 62).

Mounting the base station on the wall (optional)

Page 11

Getting started

¤ Connect the flat plug to the charging cradle . ¤ Plug the power adapter into the power socket .

If you have to remove the plug from the charging cradle again:

¤ Disconnect the power adapter from the mains

power supply.

¤ Press the release button and disconnect the

plug .

234

¤ Insert the batteries

with the polarity in the right direction (for correct +/- direction, see diagram).

¤ Insert the battery cover

on the top .

¤ Then press the cover until

it clicks into place .

To open the battery cover, for example to change the batteries:

¤ Grip the notch on the

cover and slide it

downwards .

Connecting the charging cradle (if included)

Setting up the handset for use

The display is protected by a plastic film. Please remove the protective film!

Inserting the batteries and closing the battery cover

Caution

Use only rechargeable batteries recommended (¢ page 61) , as this could otherwise result in significant health risks and personal injury. For example, the outer casing of the batteries could be destroyed or the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.

Page 12

Getting started

8.5 h

CLT116

CL116

8.5 h

Belt clip

The handset has notches on each side to attach the belt clip.

o attach — press the belt clip onto the back of the handset

u T

so that the tabs on the belt clip click into place in the notches.

u To remove — press the centre of the belt clip firmly with

your right thumb, push the fingernail of your left thumb up between the clip and the casing and pull the clip in an upward direction.

Charging the batteries

The batteries are supplied partially charged. Please charge completely before use. (The batteries are fully charged when the power icon

disappears from the display.)

¤ Charge the handset in the base for 8.5 hours.

Notes

u The handset may only be placed in the designated base/charging cradle. u The battery may heat up during charging. This is not dangerous. u After a time, the charge capacity of the battery will decrease for technical reasons. u Handsets contained in the package have already been registered to the base. If, however,

a handset has not been registered (display "Please register handset" or "Place handset in base"), please register it manually (

¢ page 39).

Page 13

Changing the display language

¤ Press right on the control key.

¤ Press keys L and 5 slowly one after the

other.

The language selection display appears. The current language (e.g. English) is selected.

¤ Press the down control key s ...

... until the language you wish to use is displayed e.g. French.

¤ Press the right key, directly under the

display, to select the language.

The selection is marked with Ø.

Deutsch

English

Franc ais

Deutsch

English

Franc ais

Deutsch

English

Franc ais

Italiano

Espanol

Back Select

Deutsch

English

Franc ais

Deutsch

English

Franc ais

Example

You can also change the display language via the menu:

¤ Ï ¤ OK ¤ q Language ¤ OK ¤ q Select language ¤ Select

or, if you do not understand the language currently set, go to:

Getting started

¤ Press and hold the End call key a to return to idle status.

Page 14

Getting started

¤ Press the key Time below the display screen to

open the input field. (If you have already set the date/time, open the

input field via the menu:

¤ Ï¤ OK ¤ Date/Time ¤ OK)

The submenu Date/Time is shown on the display.

¤ The active input position flashes.

Enter the day, month and year as an 8-digit number via the keypad, e.g. 4Q2Q3 for 14.10.2013.

Press the right or left control key to change the input position, e.g. to correct an entry.

¤ Press the down control key to switch to the

time input field.

¤ Enter the hours and minutes in 4-digit format

via the keypad e.g., QM5 for 07:15 am. Change the input position with the control key if necessary.

¤ Press the key Save below the display screen to

save the entry.

Date/Time

Date:

15.01.2013

Time:

00:00

Back Save

Calls Time

Date/Time

Date:

14.10.2013

Time:

07:15

Back Save

Setting the date and time

Set the date/time so that the correct date and time can be assigned to incoming calls, and so that you can use the alarm.

Page 15

Connecting the headset

Display shows: Saved. You will hear a confirmation tone.

Date/Time

‰

Saved

i Ã

07:15

INT 1 14 Oct

Calls Calendar

You will automatically return to idle status.

Your phone is now ready for use.

Getting started

You can connect a headset with 2.5 mm jack connectors.

Page 16

Getting started

What would you like to do next?

After successfully setting up the phone, you can make calls straight away, customise your telephone according to your requirements or firstly familiarise yourself with the operation.

Setting ringtones

Assign specific tunes to internal and external calls, reminders (¢ page 28), wake-up calls (

¢ page 48) and to certain callers (¢ page 42).

Protecting yourself against unwanted calls

Set your phone up so that it doesn't ring if there is an anonymous call or use the time control

¢ page 30).

(

Setting up the answer machine

Record your own message and set your recording parameters (¢ page 34).

Use available handsets to continue calling from your new base. Transfer directory entries from these handsets to your new handset (

Configuring ECO DECT settings

Reduce the transmission power (emissions) of your phone (¢ page 33).

¢ page 39,¢ page 43).

If you have any questions about using

¢ page 57) or contact our Customer Service team (¢ page 56).

(

your phone, please read the tips on troubleshooting

Page 17

Understanding the operating steps in the user guide

The keys on your handset are set out in these operating instructions as follows:

c / v / a Answer call key / Menu key / End call key Q to O Number / Letter keys * / # Star key / Hash key f / S Message key / Recall key

Overview of display icons (

Example: Activating/deactivating Auto Answer

Illustration in the user guide:

¤ Ï ¤ OK ¤ q Telephony ¤ OK ¤ Auto Answer ¤ Change (³

Follow this procedure:

¤ v: With the handset in idle status, press the right control key to open the main menu. ¤ Ï: Navigate to the Ï icon using the control key p. ¤ OK: Press the display key OK or the middle of the control key w to open the submenu

Settings.

¤ q Tel ephon y: Scroll to the entry Tel e ph o ny with the control key q. ¤ OK: Press the display key OK or the middle of the control key w to open the submenu

Te le ph o ny .

¤ Auto Answer: The activate/deactivate auto answer function is selected. ¤ Change (³

to alternate between activating or deactivating (³

= activated): Press the display key Change or the middle of the control key w

¢ page 52).

= activated)

= activated, ´ = deactivated).

Page 18

Getting to know your phone

Switching the handset on/off

¤ Press and hold the End call key a in idle status to switch the handset on or off.

Locking/unlocking the keypad

The keypad lock prevents any accidental use of the phone. If you press a key when the keypad is locked, a message is displayed.

¤ Press and hold the # key to lock or unlock the keypad.

If a call is signalled on the handset, the keypad call. It then locks again when the call is finished.

Control key

In the description below, the side of the control key (up, down, right, left, middle) that you have to press in the different operating situations is marked

ck, e.g. v for "press right on the control key".

in bla

The control key allows you to navigate with status or during an external call, it has the following functions:

When the handset is in idle status

s Open the phonebook. v or w Open the main menu. u Open list of handsets. t Bring up the menu for setting the handset's call volume (

automatically unlocks. and you can accept the

in menus and entry fields. In idle

¢ page 22).

During an external call

s Open the phonebook. u Initiate an internal consultation call. t Adjust the loudspeaker volume for earpiece and handsfree mode.

Functions when pressing the centre of the control key

The key has different functions, depending on the operating situation.

u In

idle status, it opens the main menu.

u In submenus, selection and entry fields, the key takes on the function of the display keys

OK, Ye s, Save, Select or Change.

Note

These instructions demonstrate opening the main menu by pressing the right of the control key and confirming the functions by pressing the appropriate display key. However, if you prefer, you can also press the middle of the control key.

Page 19

Getting to know your phone

Back Save

Current display key functions

Display keys

Settings

ì Ê

Ì Ç

É Ï

Back OK

Example

Display keys

The display keys have a function preset by default in idle status, but the keys can be re-assigned

¢ page 31).

(

The functions of the display keys change dependi Example

Some of the important display keys are:

Options O OK Confirm selection. Back Skip back one menu level or cancel operation. Save Save entry.

Overview of icons on the display keys (

pen a menu for further functions.

¢ page 53).

ng on the operating situation.

Menu guidance

The functions of your telephone are displayed on a menu that consists of several levels. Menu overview

Main menu (first menu level)

¢ page 54.

¤ When the handset is in idle status, press right on the control key v to open the main menu.

The main menu functions are shown in the display as icons. The icon for the selected function is highlighted and the name of the assoc

Accessing a function, i.e. opening the corresponding submenu (n

iated function appears in the display header.

ext menu level):

¤ Use the control key p to navigate to the required function

and press the display key OK.

Returning to idle status: Brief End call key a.

ly press the display key Back or

Page 20

Getting to know your phone

Settings

Date/Time

Audio Settings

Display

Language

Registration

Back OK

Example

i Ã

07:15

INT 1 14 Oct

™



02 10 08

Calls Calendar

Example

Submenus

The functions in the submenus are displayed as lists.

To access a function:

¤ Scroll to the function using the control key q and press

OK.

Returning to the previous menu level: Br key Back or End call key a.

iefly press the display

Returning to idle status

From any menu:

¤ Press and hold the End call key a.

Or:

¤ If you do not press a key, the display automatically returns

to idle status after 2 minutes.

Message lists

Any messages you receive are saved in the message lists. An advisory tone sounds as soon as a new entr The Message key also flashes (if activated, for message types and the number of new messages are shown on the i

New messages available:

ÃOn the answer machine (only Aton CLT116)/network

mailbox (

u ™ In the missed calls list

 In the missed alarms list (¢ page 47)

dle display.

¢ page 35, ¢ page 38)

y appears on a list.

¢ page 27). Icons

Open the message list by pressing the Message key f. You

n access the following message lists:

u Ans

wer Mach.: Answer machine list (only Aton CLT116)

u Mailbox: Network mailbox (if your network provider supports this function and the number

of the network mailbox has been stored.)

u Missed Calls: Missed call list (see "Call list" u Missed Alarms: Missed appointments list

The icon for the network mailbox is always displa telephone. The other lists are only displayed if they contain messages.

Opening the list: q Select required list. Exception: If

selected (

you select the network mailbox, the number of the network mailbox will be

¢ page 38). Lists are not opened on the display.

¢ page 44)

yed, provided the number is stored in the

¤ OK

Page 21

Getting to know your phone

New Entry

First Name: I

Surname:

Phone (Home):

Abc

Û Save

Entering numbers and text

If several number and/or text fields are displayed (e.g. First Name and automatically activated. The following fields must be activated by navigating with the control key q. A field is ac

tivated when a cursor is blinking inside it.

Correcting incorrect entries

u Deleting characters before the cursor: press the display

key Ñ briefly.

u Deleting words before the cursor: press and hold the

display key Ñ.

Entering text

u Letters/Characters: Multiple letters and characters are assigned to each key between Q

and O. The characters are shown according to the key in a selection line at the bottom left of the display. The selected character is highlighted. Briefly press the key several times in succession to select the required letter/character.

u Placing the cursor: Letters/characters are inserted at the cursor position. You can insert the

cursor by pressing the control key r, or q in fields with multiple characters.

u Typing lower case, upper case and numbers: Press the hash key # to switch between

lower case, upper case or numbers for the following letters. When editing a phonebook entry, the first letter and each letter following a space is automatically in upper case.

u Special characters: Press the star key * to open the special characters table. Navigate to

the character desired using the star key and press the display key Insert to select it.

u Special letters: Umlauts or other marked/diacritic characters can be selected by pressing the

corresponding letter several times. See the character table

Surname in a phonebook entry), the field is

¢ page 62.

Page 22

Making calls

Example

All calls

™ äJames Foster

To day , 18:3 0

™ 01712233445566

11.06.2013, 18:30

š 0168123477945

10.06.2013, 17:13

View Options

Making calls

Making an external call

¤ Enter number, briefly press the Answer call key c.

Or:

¤ Press and hold the Answer call key c, enter number.

You can cancel the dialling process with the End call key a.

Dialling with the redial list

The redial list contains the 20 numbers last dialled with the handset. You can manage this similarly to your phone's message lists (

¤ Press the Answer call key c briefly to open the redial list. ¤ q Select entry. ¤ Press the Answer call key c. The number is dialled.

When a name and corresponding phone number are displayed: Press the display key Vi

Managing entries in the redial list:

¤ Open redial list. ¤ q Select entry. ¤ Options

You can select the following functions:

u Co

py to Directory ¤ OK

Copy an entry to the phonebook (

u Display number

Copy a number into the display and edit it or add to it, then select with c or save as a new entry in the phonebook with Ó.

u Delete entry

Delete the selected entry.

u Delete all

Delete all entries.

¤ OK

¢ page 18).

ew.

¢ page 42).

Dialling from the call list

v ¤ Ê ¤ OK ¤ q Select list. ¤ OK

¤ q Select entry. ¤ c ¤ The number is dialled.

Notes

u You can also bring up the call list using the display

key Calls, but you must assign a display key accordingly (

u You can also open the list Missed calls using the

Message key f.

¢ page 31).

Page 23

Making calls

Dialling with the phonebook

s ¤ q Select entry. ¤ c

¤ If multiple numbers are entered: Select the number with r and press the Answer call

key c or OK.

¤ The number is dialled.

One touch call

You can set up your phone so that you can dial a specific number when you press a key of your choice. This allows children, who are unable to enter a number, to call a certain number, for

example.

¤ É ¤ OK ¤ q One Touch Call ¤ OK

¤ Activation: r On / Off ¤ Call to: Enter or change the number that you wish to dial. ¤ Save

The activated One Touch Call appears on the idle display ing any key. Press the End call key a to cancel dialling.

Ending one touch call:

. The saved number is dialled by press-

¤ Press the display key OFF. ¤Press and hold the # key.

Or:

¤ Press and hold the # key.

Accepting a call

You have the following options:

¤ Press c. ¤ If Auto Answer is switched on (¢ page 28), remove the handset from the charging cradle. ¤ Aton CLT116: Press the display key Ô to forward the call to the answer machine

¢ page 36).

(

Accepting a call with the L410 handsfree clip ( To use your L410, you must register it to your base station. Proceed as described in the operating instru

ctions for the L410.

¢ page 63): Press the Answer call key.

Accepting/rejecting call waiting

If you receive a call while conducting an external call, you will hear the call waiting tone. If the number is transferred, you will see this number or the name of the caller on the display.

¤ Rejecting a call: ¤ Options ¤ q Reject waiting call ¤ OK ¤ Accepting a call: ¤ Press the display key Accept. You will then be speaking to the new caller.

The previous call is placed on hold.

Returning to the call on hold: To end the current call and return to the call on hold, press a.

Page 24

Making calls

Caller display

Calling Line Identification

The caller's phone number is displayed. If the caller's number is stored in your phonebook, the number type and name are displayed.

No Calling Line Identification

Instead of name and number, the following is displayed:

u External: No number has been transferred. u Withheld: Caller has withheld Calling Line Identification ( u Unavailable: Calling Line Identification does not work.

¢ page 23).

Notes on phone number display for CLIP

When you receive a call, the caller's number and/or name is displayed on the screen if the following conditions are met:

our network provider supports CLIP, CLI and CNIP.

u Y

- CLI (Calling Line Identification): the caller's number is transmitted.

- CLIP (Calling Line Identification Presentation): the caller's number is displayed.

By default, the number of the caller is sho

wn on the handset of your telephone, ¢ page 58.

Handsfree mode

If you are going to let someone listen in, you should tell the other party that this is happening.

Activating/deactivating handsfree mode during a when listening to the answer machine (only Aton CLT116):

call, when establishing the connection and

¤ Press c.

Placing the handset in the charging cradle during a call:

¤ Press and hold c for a further 2 seconds while placing the handset in the charging cradle.

Adjusting the loudspeaker volume

u Accessing the settings via the menu:

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK ¤ Handset Volume ¤ OK

¤ Earpiece: r Volume can be set at 5 levels for the earpiece and headset. ¤ Speaker: r Set the volume at 5 levels. ¤ Save

u Accessing the settings during a call for the mode currently in use (handsfree, earpiece, head-

set):

¤ control key t ¤ r. ¤ The setting is saved automatically after 2 seconds or press the display key Save. The screen

reverts back to its previous display.

Page 25

Making calls

Switching the microphone on/off (muting)

If you turn the microphone off during a call, your caller can no longer hear you.

¤ Press v to switch the microphone on/off.

Using provider-specific functions (network services)

Network services depend on and must be requested from your network provider (which may incur additional charges). Network services fall into two distinct groups

u Net

work services that are activated for the following call or all subsequent calls when no call

is being made (e.g. calling anonymously (without Calling Line Identification)). You can easily activate/deactivate these network services via the menu Ç.

u Network services that are activated during an ex ternal call, e.g.,"consultation call", "swapping

between two callers" and "setting up conference calls". These services are provided to you during an external call in the option slider (e.g Ext. Call, Conf.).

You will find a general description of the features of their store branches.

on your network provider's website or at one

Notes

u To activate/deactivate the following services, a code is generally sent to the telephone

network.

¤ After a confirmation tone from the telephone network, press a.

u All functions that can be activated under menu item Ç are services made available by

your network provider. If you require assistance, please contact your network provider.

u It is not possible to reprogram the network services.

Setting network services

Withholding a phone number (CLIR - Calling Line Identification Restriction)

If you do not want to have your phone number displayed to the other caller, you can withhold the number (CLIR). Calling Line Identification is withheld until you deactivate the function again.

Activating/deactivating withheld number:

¤ Ç ¤ OK ¤ q All Calls Anonym. ¤ Change (³ = activated)

Cancelling Calling Line Identificatio

¤ Ç ¤ OK ¤ q Next Call Anonym. ¤ OK ¤ Dial the number ¤ Dial

n for the next call only:

Call waiting during an external call

If the function is activated, you will be notified whilst on an external call by a call waiting tone and a message on the display that another external caller is waiting.

Activating/deactivating call waiting:

¤ Ç ¤ OK ¤ q Call Waiting ¤ OK ¤ Status: r On / Off ¤ Send

Call protection

No incoming calls are signalled. The caller will receive a notification that the person called (you) does not want to be disturbed.

¤ Ç ¤ OK ¤ q Call Protection ¤ OK ¤ Status: r On / Off ¤ Send

Page 26

Making calls

Call Waiting

«1234567

Accept Options

Consultation

Call to:

12I

On hold:

025167435

End Options

Network services during an external call

Call waiting during an external call

If the function is activated (¢ page 23), you will be notified whilst on an ex ex tern al c alle r is wait ing. If t he n umbe r is tran sfer red , you will see this number or the name of the caller on the display.

You have the following options:

ternal call by a call waiting tone that another

¤ Options ¤ q Reject waiting call ¤ OK

The waiting caller hears the busy tone.

Or:

¤ Accept

Once you have accepted the waiting call, you can switch between the two callers ("Call swapping" speak to both at the same time "Conference call"

¢ page 25) or

¢ page 25).

Callback

If you have dialled an external number and can hear the busy tone:

¤ Options ¤ q Ringback ¤ OK ¤ a

As soon as the participant hangs up, your phone will ring.

¤ Press c to establish the connection to the participant.

Cancel callback:

¤ Ç ¤ OK ¤ q Ringback Off ¤ OK

Making a consultation call

Make another external call during an external call. The first call is placed on hold.

¤ Ext. Call ¤ Enter the second participant's number.

The previous call is placed on hold. The second participant is

lled.

¤ If the second participant does not answer: Press the

display key End.

Or:

¤ If the second participant does answer: You will then be

speaking to the participant. Ending a consultation call:

¤ Options ¤ q End active call ¤ OK

You will be reconnected to the first call participant. Or: Press a. You will receive a callback from the first participant.

Page 27

Making calls

Call Swap

â 1234567

025167435

08:15

Conf. Options

Call swapping

Switching between two calls. The other call is placed on hold.

Prerequisite: Y have called a second participant (consultation call) or have accep

The numbers or names of both participants are shown in the displa indicated with the icon â and highlighted.

ou must be conducting an external call and

ted a waiting call.

y. The participant that you are talking to at that point is

¤ You can switch between calls using the control key q.

The other call is placed on hold.

¤ Ending the current call:

¤ Options ¤ q End active call ¤ OK

You will be reconnected to the participant on hold. Or: Press a. You will receive a callback from the participant on hold.

Conference call

You will then be speaking to both participants at the same time.

Prerequisite: Y (consultation call) or have accepted a waiting call.

ou must be conducting an external call and have called a second participant

¤ Press Conf. You and the other two callers can hear and speak to each other simultaneously. ¤ End call with both participants: Press a.

Or:

¤ Return to call swapping: Press the display key End Conf.

You will be reconnected to the participant with whom you started the conference call.

Each of the participants can end their participatio call key and terminating the call.

n in the conference call by pressing the End

Page 28

Adjusting the telephone settings

Area Codes

International code:

00 - 41

Local area code:

0 - [8 ]

Û Save

Example

Screensaver

Activation

<On >

Selection:

Analog Clock

Back Save

Example

Adjusting the telephone settings

The handset and base station are preconfigured, but you can change the settings to suit your individual requirements.

The settings can be changed via the menu Settings whil

Changing the display language

v ¤ Ï ¤ OK ¤ q Language ¤ OK ¤ q Select languages ¤ Select (Ø = selected)

Setting your country and local area codes

Your area code (international and local area code) must be saved on the phone before you can transfer phone numbers

.g. in vCards). Some of these numbers are already preset.

(e Please ensure that the prefix is correctly separated from the rest of the area code.

¤ Ï¤ OK ¤ q Tel ep h on y ¤ OK

¤ q Area Codes ¤ OK ¤ p Navigate to the entry field,

delete the number using Ñ if needed

¤ Enter the number

¤ Save

Adjusting the handset display settings

st on a call or in idle status.

Setting a screensaver

You can set a screensaver for the display when in idle status. You can choose from an analogue clock

To show the display in idle status, briefly p

¤ Ï ¤ OK ¤ q Display ¤ OK

, a digital clock or an image

ress a.

¤ Screensaver (μ = activated) ¤ Edit

¤ Activation: r On / Off ¤ Selection:

r Digital Clock / Analog Clock / [Images] Or:

¤ View (View screensaver) ¤ q Select screensaver ¤ OK

¤ Save

Setting the colour scheme

You can set the display to show a dark or a light background.

¤ Ï ¤ OK ¤ q Display ¤ OK ¤ q Colour Schemes ¤ OK

¤ q Colour Scheme 1 / Colour Scheme 2 ¤ Select (Ø = selected)

Page 29

Adjusting the telephone settings

System

975 SET: [0]

Back OK

Setting the display backlight

The display backlight is always lit when the handset is not in the base/charging cradle or when a key is pressed. Any digit keys pressed appear on the display for pre-dialling.

You can also activate/deactivate the display backlight for idle status:

¤ Ï ¤ OK ¤ q Display ¤ OK ¤ q Backlight ¤ OK

In Charger: r On / Of Out of Charger: r On / Of

¤ Save

Note

The handset's standby time can be significantly reduced if the display backlight is activated.

Activating/deactivating Message key flashing

Specify whether receipt of new messages should be displayed on the handset by the message LED.

¤ In idle status: v ¤ *#Q5#

The display shows the number 9.

¤ Press the following keys to select the type of message:

M4 for messages on the network mailbox M5 for missed calls MM for messages on the answer machine

You will see the number 9 followed by your entry (e.g. 975); the current setting will be flashing in the entry field (e.g. 0).

(only Aton CLT116)

¤ Press the key Q or  to determine the setting for new

messages: Q The Message key flashes

 The Message key does not flash

(stops when the key is pressed)

¤ Confirm by pressing OK or go back to the idle display without saving by pressing Back.

Page 30

Adjusting the telephone settings

Volu me

For internal calls and alarms:

< ‡ >

External Calls:

Back Save

Example

Activating/deactivating Auto Answer

When set to Auto Answer, the handset accepts an incoming call as soon as you remove it from the charging cradle.

¤ Ï ¤ OK ¤ q Telephony ¤ OK ¤ Auto Answer ¤ Change (³

Regardless of the setting Au back in the charging cradle. Exception: Press and hold c for a further 2 seconds while placing the handset in the charging cradle

to Answer, the connection ends as soon as you place the handset

= activated)

Setting earpiece profiles

You can set various profiles for the earpiece to optimally adapt your phone to your environment. Check which is the most comfortable for you.

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK ¤ q Earpiece Profiles ¤ OK ¤ q

profile

¤ Select (Ø = selected)

Earpiece Profiles: Hi

gh and Low. The default is Low.

Select

Setting the handset ringtones

Setting the ringtone volume

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK

¤ q

Ringtones (Handset) ¤ OK ¤ Volume ¤ OK

¤ For internal calls and alarms:

olume can be set at 5 levels or crescendo (increasing

r V volume) for internal calls and anniversaries.

¤ External Calls:

olume can be set at 5 levels or crescendo (increasing

r V volume) for external calls.

¤ Save

Setting the ring melody

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK ¤ q Ringtones (Handset) ¤ OK

¤ q

Melodies ¤ OK

¤ Internal Calls: r Setting the volume/melody for internal calls and anniversaries. ¤ External Calls: r Setting volumes/melodies for external calls. ¤ Save

Activating/deactivating the ringtone

Activating/deactivating the ringtone permanently: Press and hold the star key *. When the ringtone is deactivated, ó appears in the status bar.

Deactivating the ringtone for a curr

ent call: Press Silence or a.

Page 31

Adjusting the telephone settings

Activating/deactivating the alert tone (beep)

You can activate an alert tone (beep) instead of the ringtone. Press and ho When the alert tone is activated, ñ appears in the status bar. Press and hold the star key * to deactivate the alert tone again.

ld the star key * and within three seconds ¤ Beep.

Setting the base station ringtone (Aton CLT116 only)

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK ¤ q Ringtones (Base) ¤ OK

¤ Volu me:

olume can be set at 5 levels or crescendo (increasing volume) or ringtone can be

r V deactivated (level 0).

¤ Melody: r Setting the ringtone/melody. ¤ Save

Activating/deactivating advisory tones

Your handset uses advisory tones to tell you about different activities and statuses. These advisory tones can be activated/deactivated independently of each other.

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK ¤ q Advisory Tones ¤ OK

¤ Key Tones: r On / Off

Tone when keys are pressed.

¤ Confirmation: r On / Off

Confirmation/error tone after making entries, advisory tone when a new message has been rece

ived.

¤ Battery: r On / Off

Warning tone when there are fewer than 10 minutes of talktime remaining (every 60 seconds). Th

ere is no battery warning when the baby monitor is activated.

¤ Save

Activating/deactivating music on hold

You can activate/deactivate hold music for external calls during consultation and forwarding.

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK ¤ q Music on hold ¤ Change (³ = activated)

Page 32

Adjusting the telephone settings

Time Control

For external calls:

Suspend ring. from:

22:00

Suspend ring. until:

07:00

Back Save

Example

Protection against unwanted calls

Setting time control for external calls

You can specify a time period when you do not want the telephone to ring.

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK

¤ q

Ringtones (Handset) ¤ OK ¤ q Time Control ¤ OK

¤ For external calls: r On / Off

If activated:

¤ Suspend ring. from: Enter the start of the period. ¤ Suspend ring. until: Enter the end of the period.

¤ Save

Note

During this period, your phone will continue to ring for numbers to which you have assigned a VIP ringtone in the phonebook.

Protection from anonymous callers

You can set your phone so that it doesn't ring for anonymous calls (¢ page 22, callers who have withheld Calling Line Identificatio applies to handsets for which the setting is configured.

¤ Ï ¤ OK ¤ q Audio Settings ¤ OK ¤ q Ringtones (Handset) ¤ OK ¤ q

Calls Silent

¤ Change (³ = function activated)

n). The call is only signalled on the display. The setting only

Anon.

Quick access to numbers and functions

The digit keys 2 up to O can be assigned to a number from the phonebook.

The left and right di

¢ page 31).

(

You can then dial the number or start the func

splay keys have a function pr ese t by def aul t, b ut t he k eys can be re- ass ign ed

tion by simply pressing a key.

Assigning digit keys

Prerequisite: You must assign a number to the digit key.

¤ Press and hold the digit key.

Or: Briefly press the digit key.

¤ Press the display key QuickDial.

¤ The phonebook opens. ¤ q Select entry. ¤ OK

The entry is saved to the corresponding digit key.

Note

If you delete or edit the entry in the phonebook at a later date, this will not affect the assignment to the number key.

Page 33

Operating a repeater

Selecting numbers/changing an assignment

Prerequisite: You must have assigned a number to the digit key.

When the handset is in idle status

¤ Press and hold the digit key: The number is dialled immediately.

Or:

¤ Briefly press the digit key: Press the left-hand display key with the number/name

(abbreviated if necessary) to dial the number. Or: Press the display key Change to change the key assignment, or press the display key Clear Key to delete the assignment.

Assigning display keys

¤ In idle status, press and hold the left or right-hand display key. ¤ The list of possible key

assignments is opened.

Choose from the following functions:

Baby Monitor

Alarm Clock

Calendar Op

One Touch Call

Redial Sh

More Functions...

Call Lists Show

Withhold Number W

Call Divert Set up

¤ q Select entry ¤ OK

Set and activate the baby monitor (¢ page 48). Set and activate the alarm clock (¢ page 48).

en calendar (¢ page 46).

Set up one touch call (¢ page 21).

ow redial list (¢ page 20).

You can also choose further functions:

call list (¢ page 44).

ithhold phone number identification for next call (¢ page 23).

call forwarding (¢ page 45).

Operating a repeater

You can use the Repeater (RTX 4002) to increase the range of your handset.

Please refer to the repeater user guide for the function and setting of your repeater.

Repeater

Prerequisites:

u EC

O DECT function Maximum Range must be activated.

u ECO DECT function No Radiation must be deactivated. u Encryption must be deactivated:

¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Encryption ¤ Change (´ = deactivated)

Modifying the ECO DECT functions

Registering a repeater:

¤Connect the repeater to the mains power supply. ¤ Press and hold (min. 3 secs) the

Registration/Paging key on the base (Aton CLT116 repeater registers automatically.

You can register up to 6 repeaters.

¢ page 33.

¢ page 2, Aton CL116 ¢ page 3). ¤ The

Page 34

Changing the system PIN

v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q System PIN ¤ OK

¤ If current PIN not 0000: enter current PIN ¤ OK ¤ Enter new system PIN (4 digits; 0 - 9) ¤ Save

Resetting system PIN

If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the base settings will be reset and all the handsets will be de-registered!

¤ Remove the power cord from the base. ¤ Press and hold the Registration/Paging key (Aton CLT116 ¢ page 2, Aton CL116 ¢ page 3)

and at the same time reconnect the power cord to the base.

¤ Hold the Registration/paging key for at least 5 seconds.

Restoring phone to default setting

You can reset individual modifications to base and handset settings separately.

The following are not af

/ time,

u Date u Registration of handsets to the base and the current selection of the base,

u System PIN, u Entries in the calendar and phonebook, u Redial list.

When resetting the handset (H

When resetting the base (Bas handset names, as well as call lists/answer machine lists, will be reset

fected by the reset:

andset Reset), audio and display settings will be deleted.

e Reset), ECO DECT, answer machine, system settings and internal

Resetting the handset/base station

v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Handset Reset / Base Reset ¤ For Base Reset:

Enter the system PIN

¤ OK ¤ Confirm security prompt with Ye s

Page 35

ECO DECT (Eco Mode plus)

Reducing transmission power (radiation)

In normal operation (default setting):

The device range is set to maximum as default. This guarantees optimum wireless management. In idle status, the handset will not function (as it is not transmitting). Only the base will maintain contact with the handset via a low wireless signal. During a call, the transmission power automatically adapts to the distance between the base and handset. A closer distance to the base means lower transmission power.

You can reduce the transmission power even further:

1) Reducing the range and thereby lowering transmission power by up to 80%

In many spaces such as apartments, business rooms and offices, the maximum range is not necessary. If you deactivate the Maximum Range setting, you can reduce the transmission power during a call by up to 80%, using half of the range.

¤ Ï ¤ OK ¤ q ECO DECT ¤ OK ¤ Maximum Range ¤ Change (³ = activated)

Display icon for reduced range This setting cannot be used with a repeater (

2) Deactivating DECT wireless module in idle status (Eco Mode plus / EcoMode +)

With the No Radiation setting, you can deactivate the transmission power of the base completely during idle status.

¤ Ï ¤ OK ¤ q ECO DECT ¤ OK ¤ q No Radiation ¤ Change (³ = activated)

When the wireless model i signal strength icon. This setting cannot be used with a repeater (

¢ page 52.

¢ page 31).

s deactivated, the icon ¼ is displayed in idle status instead of the

¢ page 31).

Notes

u To enjoy the benefits of the No Radiation setting, all registered handsets must support

this feature.

u When the No Radiation setting is activated and a handset is registered to the base that

does not support this feature, No Radiation will automatically be deactivated. As soon as this handset is de-registered, No Radiation will automatically be re-activated.

u The wireless connection will only be established for an incoming or outgoing call and the

connection will be delayed by about 2 seconds.

u So that a handset can establish a wireless connection with the base more quickly for an

incoming call, it must "listen" to the base more often, i.e. scan the environment. This increases power usage and reduces the standby and talktime duration of the handset.

u When No Radiation is activated, there will be no range display/range alarm on the

handset. Contactability can be tested by assigning a line: Press and hold the Answer call key

c. You will hear the ringing tone.

Page 36

Answer machine (Aton CLT116)

Answer Machine

Activation:

Mode:

Record from:

08:00

Back Save

Answer machine (Aton CLT116)

The answer machine is operated using the keys on the base (¢ page 2) or on the handset.

Activating/deactivating the answer machine

v ¤ Ì ¤ OK ¤ q Activation (μ= activated) ¤ Change

¤ Activation: r On / Off

If activated:

¤ Mode:

r Answer & record / Ans

nswer & record: The caller can leave a message;

- A

- Answer only: The caller only hears an announcement

and cannot leave a message;

- Alternating:

If activated, Record from: s / Record until: Enter the length of time in which messages are recorded.

¤ Save

Setting up the answer machine

Recording a personal announcement/advisory message

v ¤ Ì ¤ OK ¤ q Announcements ¤ OK ¤ Record Announcem. / q Rec. Advisory

¤ OK ¤ To record, press "OK" and speak after the tone. ¤ OK ¤ Record a message

Msg. after the ready tone (min. 3 secs, max. 180 secs).

Cancelling the recording: Br

recording.

After the recording, the announcement is played back for you to check.

Repeating the recording: P

wer only / Alternating

¤ End (Complete the recording and save.)

iefly press the Answer/End call key a or Back during the

ress New during playback.

Notes

u The recording ends if there is a pause lasting longer than 3 seconds. u If you cancel the recording, the default announcement is used. u If the answer machine's memory is full, it will switch to Answer only mode. After old mes-

sages have been deleted, it switches back into Answer & record mode.

Page 37

Answer machine (Aton CLT116)

Listening to announcements/advisory messages

v ¤ Ì ¤ OK ¤ q Announcements ¤ OK ¤ q Play Announcement / q Play Advisory

¤ OK

Msg.

If you have not recorded a personal announcement, the relevant default announcement is played.

Recording a new announcement: Press New during playback.

Deleting announcements/advisory messages

v ¤ Ì ¤ OK ¤ q Announcements ¤ OK ¤ q Delete Announcem. / q Del. Advisory

¤ OK ¤ Ye s (Confirm the prompt)

Msg.

Additional setting options

u Setting recording parameters:

¤ Ì ¤ OK ¤ q Recordings ¤ OK

- Length: r 1 min. / 2 min. / 3 min. / Maximum.

- s Ring Delay: r Immediately / 10 sec. / 18 sec. / 30 sec. / Automatic (10 secs, if new

messages are available, otherwise 18 secs).

¤ Save

u Deactivating/activating call screening on the handset / base:

¤ Ì ¤ OK ¤ q Call Screening / Base ¤ Change (³

Deactivating call screening on the handset for the current playback: Press Silence.

= on)

Playing back messages

Messages are listened to using the keys on the base (¢ page 2) or on the handset.

¤ Press and hold the  key.

Prerequisite: Key 1 is assigned to the answer machine.

¤ Ì ¤ OK ¤ q Set Key 1 ¤ OK ¤ q Answer Machine ¤ Select (Ø = selected)

Or:

¤ Message playback via the message list:

Message key f

Or:

¤ q Answer Mach.: ¤ OK

¤ Message playback via the menu:

¤ Ì ¤ OK ¤ Play Messages ¤ OK

If the network mailbox is set up (

The answer machine begins immediately with the message playback. New messages are played ba

ck first.

The following options are available durin

topping playback:

u S

press 2, press again to continue. Or: Press Options. Playback is stopped, to continue:

u Go to the next message: press s or 3. u Skip back 5 seconds (> 5 seconds) during message playback: press 4.

¢ page 38): ¤ q Answer Machine ¤ OK

g playback:

¤ q Continue ¤ OK

Page 38

Answer machine (Aton CLT116)

u Skip to the previous message:

Press t or  during the time stamp playback.

u Go to the start of the current message:

Press t or  during the message playback.

u Delete current message: Delete u To delete all old messages:

u Calling back a caller: Options u To copy the number to the directory: Options u Marking an old message as "new": Options

¤ q Delete old list ¤ OK ¤ Ye s (Confirm prompt.)

Options

¤ q Dial ¤ OK

¤ q Copy to Directory ¤ OK

¤ q Mark as new ¤ OK

Operating when on the move (remote operation)

Check or activate the answer machine from another telephone (e.g. hotel, mobile phone).

Prerequisites: T other telephone has tone dialling (DTMF). Alternatively, you can use a code transmitter (available from retailers).

he current system PIN is set to something other than 0000 (¢ page 32) and the

Activating the answer machine

Prerequisite: The answer machine is deactivated.

¤ Call your phone line and let it ring until you hear: “Please enter PIN”. ¤ Enter the system PIN for your phone within 10 seconds.

Page 39

Answer machine (Aton CLT116)

Calling your answer machine and playing messages

Prerequisite: The answer machine is activated.

¤ Call your phone line and press the 9

phone's system PIN.

You can operate the answer machine with the keypad.

The following keys are used:

B Stop playback. Press again to resume.

3 Go to the next message.

D Skip back 5 seconds in the current message. 0 Delete current message. : Change the status of a previously played back message to "new".

During the time stamp playback: Skip to previous message. During message playback: Go to the start of the current message.

After a pause of approx. 60 seconds, the connection is ended.

key when you hear your announcement. ¤Enter your

Cancelling remote operation

¤ Press the end call key or replace the earpiece.

Note

The answer machine will terminate the connection under the following circumstances:

u The incorrect system PIN has been entered. u There are no messages on the answer machine. u After the remaining memory has been specified.

Page 40

Network mailbox (Combox)

You cannot use the network mailbox unless you have requested it from your provider and saved the network mailbox number in your phone. The access number of the Combox is 086 and

hould be pre-programmed. The access number should then be followed by your telephone

s number including the area code.

¤ Ì ¤ OK ¤ q Network Mailbox ¤ OK ¤ Network Mailbox: Enter the phone number

of the network mailbox

Playing back network mailbox messages

¤ Press and hold the  key.

Prerequisite: Assign key 1 to the network mailbox (Aton CLT116).

¤ Ì ¤ OK ¤ q Set Key 1 ¤ OK ¤ q Network Mailbox

¤ Select (Ø = selected)

Or:

¤ Message playback via the message list:

Message key f

Or:

¤ Message playback via the menu:

¤ Ì ¤ OK ¤ Play Messages ¤ OK ¤ (Aton CLT116): Network Mailbox ¤ OK

Your network mailbox is called directly. You can listen to the messages.

¤ OK

¤ q Net Mailbox: ¤ OK

Page 41

Multiple handsets

Registering handsets

You can register up to six handsets to your base. You must initiate handset registration on the handset and on the base station. Both must be carried out within 60 secs.

¤ On the base station: Press and hold (min. 3 secs) the Registration/paging key (Aton CLT116

¢ page 2, Aton CL116 ¢ page 3).

¤ On the handset Aton CLT116 (for other handsets see "Notes"):

- If the handset is not already registered to a base station: Press the display key Register.

- If the handset is already registered to a base station:

¤ Ï¤ OK ¤ q Registration ¤ OK ¤ Register Handset ¤ OK

¤ If the handset is already registered to four bases: q Select a base. ¤ OK

The connection to the base is established, this may take some time.

¤ Enter the system PIN if required (factory setting: 0000). ¤ OK

Successful registration is shown on the display.

Notes

u If six handsets are already registered to the base (all internal numbers assigned), replace

the handset with the internal number 6 with the new one. If this is not possible, because a conversation is being held for example, the message No available internal number is given. In this case, de-register another handset that is no longer required and repeat the registration procedure.

u For other Aton handsets and handsets for other devices with GAP functionality, start the

registration of the handset according to the respective user guide.

Using the handset on multiple bases

Your handset can be registered on up to four bases. The active base is the base to which the handset w saved in the list of available bases.

You can change the assignment to the base Alternatively, you can set the handset so that it selec Base), as soon as it loses connection to the current base.

¤ Ï¤ OK ¤ q Registration ¤ OK ¤ Select Base ¤ OK ¤ q

¤ Select (Ø = selected)

Base.

Changing name of a base station

v ¤ Ï¤ OK ¤ q Registration ¤ OK ¤ Select Base ¤ OK ¤ q Select base. ¤ Select (Ø = selected)

¤ Name ¤ Change name. ¤ Save

as last registered. The other bases remain

manually at any time.

ts the base with the best reception (Best

Select base or Best

Page 42

Multiple handsets

De-registering handsets

v ¤ Ï¤ OK ¤ q Registration ¤ OK ¤ q De-register Handset ¤ OK

¤ The handset used is selected. ¤ q Select another handset if required. ¤ OK ¤ If system

PIN <> 0000: Enter the system PIN.

If the handset is still registered to other bases, it (Best Base

¢ page 39).

¤ OK ¤ Confirm de-registration with Ye s.

switches to the base with the best reception

Locating a handset ("Paging")

¤ Press briefly the Registration/paging key on the base (Aton CLT116 ¢ page 2, Aton CL116

¢ page 3).

All handsets will ring at the same time ("pag

(Exception: handset on

Ending the search

which the baby monitor is activated).

ing"), even if ringers are switched off.

¤ On the base station: Press the Registration/paging key again briefly, or ¤ On the handset: press c or a or press Silence, or ¤ No action: After approx. 3 minutes, the paging call will end automatically.

Changing the handset name and internal number

When registering multiple handsets, they will automatically be assigned the names "INT 1", "INT 2" et To c hange:

c. Each handset will automatically be assigned the lowest unassigned number (1-6).

¤ The list of handsets is opened. Your own handset is marked <. ¤ q Select another handset if required. ¤ Options ¤ q Rename ¤ OK ¤ Enter names. ¤ OK

Or:

¤ q Edit Handset No. ¤ OK ¤ q Select number. ¤ OK ¤ Save

Making internal calls

Internal calls to other handsets registered to the same base are free of charge.

ress briefly) ¤ The list of handsets is opened. Your own handset is marked <. ¤ q

u (p Select the handset or Call all (group call) from the list if required.

Holding down u immediately starts a call on all r

egistered handsets.

Internal consultation/internal transfer

You receive a call from an external participant and would like to transfer the call to an internal participant or wish to consult him/her.

¤ The list of handsets is opened. ¤ If more than two handsets are registered to the base,

u select one handset or Call all.

Holding a consulta

your external call:

Transferring an external call: Y

tion call: You are speaking to the internal participant and are returning to

¤ Options ¤ q End active call ¤ OK

¤ c or OK

ou have two options to transfer the call:

¤ c

Page 43

Multiple handsets

¤ Wait until the participant called answers, then hang up:

Press the End call key a.

Or:

¤ Hang up before the participant calls: Press the End call key a.

If the participant called does not answer of does not transf

End.

Establishing a conference call/call swapping

You are taking a call while a second call is being held. Both callers are indicated on the display.

er the call, end the consultation with

¤ Call swapping: You can switch between both participants using q. ¤ Establishing a three-way conference call: Press Conf.

Ending a conference call: Press End Conf. You are reconnected with the external participant. You can switch again between both participants using q.

Each of the callers can end their participation in the conference call by pressing the End call key a.

Accepting/rejecting call waiting

If you get an external call while conducting an internal call, you will hear the call waiting tone. If the number is transferred, you will see it or the name of the caller on the display.

¤ Rejecting a call: ¤ Press the display key Reject. ¤ Accepting a call: ¤ Press the display key Accept. You are now speaking to the new caller.

The previous call is placed on hold. Ending the current call and returning to the call on hold:

¤ Options ¤ q End active call ¤ OK.

Listening in to an external call

You are conducting an external call. An internal participant can listen in on this call and take part in the conversation (conference).

Prerequisite: The func

tion Listening In is activated.

Activating/deactivating internal listening in

v ¤ Ï ¤ OK ¤ q Telephony ¤ OK ¤ q Listening In ¤ Change (³

= on)

Internal listening in

The line is engaged with an external call. Your screen will display information to that effect. You can listen in to the external call.

¤ Hold down c. All participants hear a signal tone. Call waiting is not displayed.

Ending listening in

¤ Press a. All participants hear a signal tone.

Page 44

Phonebook (Address book)

Example

New Entry

First Name:

Robert

Surname: I

Phone (Home):

Abc

Û Save

Phonebook (Address book)

In a phonebook entry, you can store first names and surnames, up to three numbers, an anniversary with a reminder, and caller melody.

You can create the directory (with up to 200 entries) individually for each of your handsets. You c

an also send lists/entries to other handsets (

Length of the entries

3 numbers: Max. 32 digits each First name and surname: Max. 16 characters each

Managing directory entries

Opening phonebook

Press the key s in idle status or, depending on the situation, the display key ö.

Creating a new entry

¤ Open directory. ¤ q <New Entry> ¤ OK ¤ Switch between the input fields using q and enter the

relevant components of the entry (names, numbers, anniversary, ringtone). Navigate downwards to display further components.

¤ Press the display key Save.

To create an entry, you must enter at least one number. If you have assigned a caller melody, the entry in the

onebook is supplemented with the symbol Æ.

¢ page 43).

Displaying/changing an entry

¤ Open phonebook. ¤ q Select the desired entry. ¤ View ¤ Display all components of the entry. ¤ Edit

Or:

¤ Options ¤ q Edit entry ¤ OK

Deleting an entry

¤ Open phonebook. ¤ q Select the desired entry. ¤ Options ¤ q

Delete all entries

in the directory:

Delete entry ¤ OK

¤ Open phonebook. ¤ Options ¤ q Delete List ¤ OK

Defining the order of the contacts entries

You can define whether the entries are to be sorted by first name or surname.

¤ Open phonebook. ¤ Options ¤ Press Sort by Surname or Sort by First Name.

If no name was entered, the default number is sho at the beginning of the list, regardless of how the entries are sorted.

The sort order is as follows:

Space | Digits (0-9) | Letters (alphabetical) | Other characters

wn in the surname field. These entries appear

Page 45

Phonebook (Address book)

Displaying the number of entries that are available in the directory

¤ Open phonebook. ¤ Options ¤ q Available Memory ¤ OK

Selecting a phonebook entry, searching in the phonebook

¤ Open phonebook. ¤ Scroll to the name you are searching for using q. Holding down q scrolls continuously

upwards or downwards through the phonebook.

Or:

¤ Enter the first few letters (max. 8 letters) using the keypad. The display jumps to the first name

that begins with these letters. If necessary, scroll on to the desired entry using q.

Transferring an entry/phonebook to another handset

Prerequisites:

u The sending and receiving handsets must both be registered to the same base. u The other handset and the base can send and receive directory entries.

You can transfer the entire directory, an ind

Notes

u An external call interrupts the transfer. u Caller pictures and sounds are not transferred. Only the date is transferred for an

anniversary.

u When transferring an entry between two vCard handsets:

If the recipient does not yet have an entry with that name, a new entry is created. If there is already an entry with that name, this entry is expanded with the new numbers.

If the entry contains more numbers than the recipient permits, a further entry is created with the same name.

u If the recipient is not a vCard handset: A separate entry is created and sent for each

number.

u Your handset receives entries from a non-vCard handset: Entries with numbers that are

already stored are discarded, otherwise a new entry is created.

ividual entry or several individual entries.

Transferring individual entries

¤ Open phonebook. ¤ q Select the desired entry. ¤ Options ¤ q Copy Entry ¤ OK¤ q to Internal ¤ OK ¤ q Select the recipient handset. ¤ OK

After a successful transfer:

¤ Press Yes if you want to send another entry. Otherwise press No.

Transferring the entire directory

¤ Open phonebook. ¤ q Select the desired entry. ¤ Options ¤ q Copy List ¤ OK¤ q to Internal ¤ OK ¤ q Select the recipient handset. ¤ OK

Page 46

Call list

Example

All calls

™ äJames Foster

To day , 18:3 5

™ 01712233445566

11.06.2013, 18:30

š 0168123477945

10.06.2013, 17:13

View Options

Transferring a displayed number to the phonebook

You can transfer numbers to the phonebook which are displayed in a list, e.g. the caller list, the redial list, as well as numbers that you have already selected or have entered for selection.

¤ The number is displayed or highlighted. ¤ Press display key Ó or Options ¤ q Copy to Directory. ¤ OK

¤ <New Entry> ¤ OK ¤ r Select number type. ¤ OK

¤ Complete the entry. ¤ OK

Or:

¤ q Select entry. ¤ OK ¤ r Select number type. ¤ OK

¤ The number is entered or an existing number is overwritten (answer the prompt using

Ye s/No).

¤ Save

Transferring a number from the phonebook

In some operating situations, you can transfer a number from the phonebook, e.g. by dialling (even after the entry of a prefix).

¤ Depending on the operating situation, open the phonebook using ö or s. ¤ q Select the phonebook entry. ¤ OK ¤ If more than one number is entered: r Select number. ¤ OK

Call list

Your telephone stores calls in various lists. Opening the lists:

issed calls list: Message key f ¤ q Missed Calls: ¤ OK

u M u List selection: v

The last 20 entries are displayed in the call list.

¤ Ê¤ OK ¤ q Select list. ¤ OK

List entry

The following information is displayed in the list entries:

he list type (in the header row)

u T u Icon for the type of entry:

(Missed calls), › (Accepted calls), š (Outgoing calls),

™

(Call on the answer machine, only Aton CLT116)

u Caller's number. If the number is stored in the phonebook,

name and number type are displayed instead (ä Phone (Home), k Phone (Office), l Phone (Mobile)). For missed calls, the number of missed calls from this number is also shown in square brackets.

u Date and time of call (if set).

¤ q Select entry. ¤ Options ¤ View: All available information is displayed, e.g. the corre-

sponding number when a name is displayed.

¤ Options: You can delete the entry or transfer the number to the phonebook (¢ page 44).

Calling back a caller from the call list:

¤ q Select entry. ¤ Press the Answer call key c.

Page 47

Contactability

Call forwarding (CF)

You can forward calls to another number. No call forwarding is activated yet or you want to change the current setting:

¤ Ç ¤ OK ¤ q Call Divert ¤ OK ¤ Status: r On / Off

Unknown

¤ To P hon e Number: Enter the number to which the call is to be forwarded. ¤ When:

- r All

- r No Answer: Calls are forwarded if no one accepts the call within several rings.

- r When Busy: Calls are forwarded if your line is busy. Call is forwarded without a call

¤ Send ¤ Your provider is called and the corresponding code is sent. If the call forwarding has

been changed, you will hear a confirmation on the phone line.

Forwarding calls to your phone number can result in additional costs. Please consult your provider.

is always displayed when calling up the menu.

Calls: Calls are forwarded immediately. No more calls are signalled on your phone.

waiting tone.

¤ a

Please note

Page 48

Calendar

May 2013

Back OK

Mo Tu We Th Fr Sa Su

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Calendar

You can remind yourself of up to 30 appointments.

In the calendar, the current day is outlined in white; on days

pointments, the numbers are displayed in colour.

with ap When a day is selected, it will be highlighted.

Saving appointments to the calendar

Prerequisite: Date and time are set (¢ page 12).

¤ É ¤ OK ¤ Calendar ¤ OK

¤ p Select the desired day. ¤ OK

u Appointments that have already been stored are shown.

tional appointment.

u If no appointments have been entered, the data input window will open immediately to add

the new appointment.

Activation: r On/Of

The following information can be added:

te: The selected day is preset. Enter new data to change.

u Da u Time: Time (hour and minute) of the appointment. u Tex t : Appointment name (e.g. dinner, meeting). u Signal: r Select the melody of the reminder signal or deactivate the acoustic signalling.

¤ Save

¤ OK opens the window to enter an addi-

Signalling of appointments/anniversaries

Anniversaries are transferred from the phonebook and displayed as an appointment. An appointment/anniversary is displayed in idle status and signalled for 60 seconds with the selected ringtone.

You can deactivate the reminder call:

¤ Press OFF to acknowledge and end the reminder call.

When you are on the phone, a

tone.

reminder call is indicated on the handset with a single advisory

Page 49

Displaying missed appointments/anniversaries

The following appointments and anniversaries are stored in the Missed Alarms list:

he appointment/anniversary call was not acknowledged.

u T u The appointment/anniversary was signalled during a phone call. u The handset was switched off at the time of the appointment/anniversary.

The last 10 entries are stored. The display. The most recent entry appears at the head of the list.

To open the list:

Or via the menu: v

¤ q scroll in the list if required

Information about the appointment/anniversary is displayed. You can:

¤ Delete an appointment/anniversary: Delete

¤ Message key f ¤ q Missed Alarms ¤ OK

¤ É ¤ OK ¤ q Missed Alarms ¤ OK

 icon and the number of new entries are shown in the

Displaying/changing/deleting stored appointments

v ¤ É ¤ OK ¤ q Calendar ¤ OK ¤ p Select the desired day. ¤ OK ¤ The

appointment list is displayed.

¤ q Select the desired appointment.

¤ View: Display appointment settings, change, if required using Edit.

Or:

¤ Options: Change settings or delete appointments.

- Edit entry

- Delete entry

- Activate/Deactivate

- Delete all Appoints. All appointments for the selected day are deleted.

¤ OK

¤ OK ¤ OK ¤ Confirm prompt with Yes .

Calendar

Page 50

Alarm clock

Alarm Clock

Activation:

<On >

Time:

12:00

Occurrence:

Monday-Friday

Back Save

Example

Alarm clock

Prerequisite: Date and time are set (¢ page 12).

You can activate/deactivate and set the alarm clock as follows:

¤ ì ¤ OK ¤ Activation: r On/Off

¤ Changing the settings:

- Time: Set the hour and minute for the wake-up time (time setting

- Occurrence: r Daily/Monday-Friday

- Volu me: r Volume can be set at 5 levels or crescendo (increasing volume).

- Melody: r Select a ringtone for the alarm call.

¤ Press the display key Save.

When the alarm clock is activated, the icon ¼and the alarm time is displa

yed in idle status.

An alarm call is signalled in the display and wi 60 seconds. During a call, the wake-up call is only signalled by a short tone.

Deactivating the alarm call/repeating after a pause (snooze mode)

Prerequisite: One alarm call sounds.

¤ Deactivating until the next alarm call: Press OFF.

Or:

¤ Snooze mode:

Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes. Or: Press nothing. The alarm call is deactivated after 60 seconds and then repeated after 5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.

¢ page 12).

th the selected ringtone for a maximum of

Baby monitor

When the baby monitor is switched on, the stored (internal or external) destination number is called as soon as a defined noise level is exceeded in the vicinity of the handset. The baby monitor alarm to an external number is cancel

In baby monitor mode, incoming calls ar display backlight is reduced to 50%. Advisory tones are deactivated. All keys are locked, with the exception of the display keys and pressing the middle of the control key.

You can answer the baby monitor alarm using the Tw the speaker of the handset with this function.

If you accept an incoming call, the baby monitor mo but the function remains activated. The baby monitor mode is not deactivated by switching the handset off and on again.

led after approximately 90 seconds.

e only signalled on the display (without ringtone). The

o Way Talk function. Deactivate/activate

de is suspended for the duration of the call,

Page 51

Baby monitor

i Ã

07:15

INT 1 14 Oct

Baby Monitor

0891234567

OFF Options

Baby monitor activated

Caution

Ensure the following points:

u The handset should be positioned 1 to 2 metres away from the baby. The microphone

must be pointed towards the baby.

u Activating the function reduces the operating time of your handset. If necessary, place

the handset in the charger.

u The baby monitor is activated 20 seconds after switching on.

Please always check the functionality when you switch on:

u Test the sensitivity. u Check the connection if you are forwarding the baby monitor alarm to an external num-

ber.

u Make sure that the answer machine at the target number is switched off. u Please note that the room monitor (baby monitor) does not operate in exceptional cases,

e.g. if the specific number of the user is busy, the specific mobile number of the user has no reception, in the event of a power cut to the mains power supply or if the battery is empty.

Activating/deactivating and setting the baby monitor

v ¤ É ¤ OK ¤ q Baby Monitor ¤ OK

¤ Activation: r On/Off ¤ Setting the baby monitor:

- Send alarm to: r Internal (at least 2 handsets are registered)/ External If Internal is selected:

¤ Handset: Press the Change display key. ¤ q

handset. If External is selected:

¤ OK

Select

¤ Number: Enter the number directly or select from

the phonebook (press the display key ö).

-Two Way Talk: r On/Off

-baby monitorSensitivity: r High/Low

¤ Save

The target number is displayed in idle status when monitor is deactivated using the OFF display key.

the baby monitor alarm is activated. The baby

Cancelling the baby monitor alarm

Cancelling during a baby monitor alarm: Press a.

Deactivating the baby monitor remotely

Prerequisites: The baby monitor alarm is forwarded to an external destination number. The

recipient's phone supports tone dialling.

¤ Accept the baby monitor alarm and press the 9 ; keys.

The call is ended. The baby monitor is deactivated and the handset is in idle status.

Page 52

Operating the telephone on a router/PABX

Operation with a router

When operating on the analogue connection of a router, potentially occurring echoes can be reduced by switching on XES mode 1 you can activate XES

If there are no problems with echoes, the normal mode (fac v

¤ *#Q5#MQ

mode 2.

¤ Q ¤ OK (for normal mode) ¤  ¤ OK (for XES mode 1) ¤ 2 ¤ OK (for XES mode 2)

Operation with a PABX

To find out which settings are required for your PABX, please refer to the PABX user guide.

Dialling modes and flash time

Changing the dialling mode

v ¤ Ï ¤ OK ¤ q Tel eph ony ¤ OK ¤ q Dialling Mode ¤ OK ¤ q Select tone dialling

(Ton e )/ pulse dialling (Pulse)

Setting flash time

v ¤ Ï ¤ OK ¤ q Tel ephony ¤ OK ¤ q Recall ¤ OK ¤ q Select flash time ¤ Select (Ø = selected)

. If XES mode 1 does not suppress the echoes sufficiently,

tory settings) should be activated.

¤ Select (Ø = selected)

Saving an access code (outside line code)

If you have to enter an access code before any external number on your PABX, e.g., "0":

¤ Ï ¤ OK ¤ q Tel ephony ¤ OK ¤ q Access Code ¤ OK ¤ Access external line

with: Enter access code (max. of 3 characters).

¤ For:

r Off: D Or: r Call Lists: Th ing lists: missed call list, accepted cal Or: r All calls: T

eactivate access code.

e access code should only be prefixed when dialling from one of the follow-

l list, answer machine list (Aton CLT116).

he access code should be prefixed to every number.

¤ Save

* XES stands for "eXtended Echo Suppression".

Page 53

Operating the telephone on a router/PABX

Setting pauses

Menu key v ¤ *#Q5# ¤ Then enter one of the following function-specific

codes:

u Pause after line seizure:

L

¤  ¤ OK (for 1 sec.)

L

¤ 2 ¤ OK (for 3 secs.) ¤ 3 ¤ OK (for 7 secs.)

L

u Pause after Recall key:

¤  ¤ OK (for 800 ms)

2

¤ 2 ¤ OK (for 1600 ms)

2

¤ 3 ¤ OK (for 3200 ms)

2

u Dialling pause (Pause after access code):

¤  ¤ OK (for 1 sec.)



¤ 2 ¤ OK (for 2 secs.)

 

¤ 3 ¤ OK (for 3 secs.) ¤ 4 ¤ OK (for 6 secs.)

 To enter dialling pause when dialling:

Hold down the Recall key S. A P appears in the display.

Switching temporarily to tone dialling (Tone)

After dialling the external number or after establishing the connection:

¤ Press the star key * briefly.

Or:

¤ Options ¤ q Tone Dialling ¤ OK

Page 54

Display icons

White, if Maximum Range is on;

Green, if Maximum Range is off

}

Ò¼¼

Display icons

Icons in the status bar

The following icons are displayed in the status bar depending on the settings and the operating status of your telephone:

Icon Meaning

Signal strength (No Radiation off)

76% - 100%

51% - 75%

26% - 50%

1% - 25%

Red: no connection to the base

No Radiation activated:

white, if Maximum Range is on; green, if Maximum R ange is off

Answer machine activated (only Aton CLT116) flashes: Answer machine is recording a message or is being operated by another internal party

Ringtone deactivated

"Beep" ringtone activated

Key lock

Menu icons

Alarm Clock

Ç É

Call Lists

Answer Machine

Select Services

Additional Features

Settings

Icon Meaning

Battery charge status:

{

y y

xy 0% - 10%

xy 11%–33%

x{ 34% - 66%

x{ 67% - 100%

White: charged over 66%

White: charged between 34 and 66%

White: charged between 11 and 33%

Red: charged below 11%

Flashes red: battery almost empty (approx. 5 minutes talktime remaining)

Battery is charging (current charge status):

Page 55

Display icons

ØÙÚ

ØãÚ

ðÚ

ØáÚ

ØìÚ

ÌÚ

‰

Display key icons

The following icons indicate the current function of the display keys according to the operating situation:

Icon Action

Ñ ö

Last number redial

Deleting text

Opening phonebook

Display icons for signalling of

Establishing a call (outgoing call)

External call Internal call Reminder call for

Reminder call for appointment

Other display icons

Information

Action complete (green)

Icon Action

Ó Ô

Connection established

Alarm call Answer machine

(Security) prompt Please wait...

Action failed (red)

Copy number to the phonebook

Forwarding a call to the answer machine (only Aton CLT116)

No connection established/connection terminated

anniversary

recording (only Aton CLT116)

Page 56

Menu tree

Opening the main menu: Press v whilst the telephone is in idle status.

Note

Not all functions described in this user guide are available in all countries or with all network providers.

Alarm Clock

Call Lists

All calls ¢ page 44

Outgoing calls

Accepted calls

Missed calls

Answer Machine

Play Messages Network Mailbox ** ¢ page 38

Activation *

Announcements * Record Announcem. *

Recordings *

Call Screening *

Network Mailbox

Set Key 1 * Network Mailbox

Language *

* Base with answer machine only ** Base with answer machine and n

Select Services

Next Call Anonym. ¢ page 23

Call Divert

Call Waiting

All Calls Anonym.

Call Protection

Ringback Off

¢ page 48

¢ page 44 ¢ page 44 ¢ page 44

Answer Machine **

¢ page 34

Play Announcement *

Delete Announcem. *

Rec. Advisory Msg. *

Play Advisory Msg. *

Del. Advisory Msg. *

¢ page 35 ¢ page 35 ¢ page 38

Answer Machine

¢ page 36

umber of the network mailbox entered only

¢ page 45 ¢ page 24 ¢ page 23 ¢ page 23 ¢ page 24

¢ page 35

¢ page 34 ¢ page 35 ¢ page 35 ¢ page 34 ¢ page 35 ¢ page 35

¢ page 38 ¢ page 35

Page 57

Additional Features

Calendar ¢ page 46

Baby Monitor

One Touch Call

Missed Alarms

Settings

Date/Time ¢ page 12

Audio Settings Handset Volume

Display Screensaver

Language

Registration Register Handset

Telephony Auto Answer

System Reset Handset

ECO DECT Maximum Range

¢ page 48 ¢ page 21 ¢ page 47

Earpiece Profiles

Advisory Tones

Ringtones (Handset)

Ringtones (Base), (only Aton CLT116)

Music on hold

Colour Schemes

Backlight

¢ page 26

De-register Handset

Select Base

Area Codes

Listening In Access Code ¢ page 50

Dialling Mode

Recall

Base Reset

Encryption

System PIN

No Radiation

Menu tree

¢ page 22 ¢ page 28 ¢ page 29 ¢ page 28 ¢ page 29 ¢ page 29

¢ page 26 ¢ page 26 ¢ page 27

¢ page 39 ¢ page 40 ¢ page 39

¢ page 28 ¢ page 26 ¢ page 41

¢ page 50 ¢ page 50

¢ page 32 ¢ page 32 ¢ page 31 ¢ page 32

¢ page 33 ¢ page 33

Page 58

Warranty/Maintenance/Repair/Approval

Warranty

The warranty period is 2 years as of the date of purchase. For warranty repair, the warranty card, filled out and stamped by the place of purchase must accompany the faulty device. Excluded from the warranty are damages due to improper use, wear and tear or tampering by others. The warranty does not include consumable materials and faults that have only an insignificant affect on the value or usability of the product. In case of errors, please contact your place of purchase.

Repair/Maintenance

Rental devices

If your phone does not operate properly, notify Technical Assistance (phone number 0800 800 800).

The repair

Purchased devices

Repair services are performed free of charge within the warranty period in accordance with the regulation o f the warranty certificate. If a repair is necessar y, the device must be return ed to the place of purchase.

If Technical Assistance is made available (also during the warranty period charged (route lump sum price as well as expenses for time). The repair costs are additional outside the warranty period.

Help

If you have any general questions about products, services etc., please contact your Swisscom Information Centre (toll-free number 0800 800 800).

and the fault action are free of charge.

), the fault action is

* An exception is damage to wearing parts (cable, labels, batteries etc.) and due to improper handling

(damage from dropping, infiltrated fluids etc.).

Page 59

Faults and self-help with troubleshooting

Not every problem signifies a fault in your telephone. In some cases, problems can be resolved by briefly interrupting the power supply to the base station (unplug the power supply unit and then plug it in again) or removing the battery cells from the handset and reinserting them. The following information is designed to help you with specific problems.

Important: Some problems or faults can only be r station, handset and connection cable) to the place of purchase.

The display is blank.

1. The handset is not activated.

¥ Hold down a.

2. The batter y is empty.

¥ Charge the battery or replace it (¢ page 9).

3. The key and display lock is activated.

¥ Hold down the hash key #.

"No Base" flashes on the display.

1. The handset is outside the range of the base.

¥ Move the handset closer to the base.

2. The base is not activated.

¥ Check the base power adapter.

3. The base's range is reduced because Maximum Range is deactivated.

¥ Activate Maximum Range (¢ page 33) or reduce the distance between the handset and base.

"Please register handset" or "Place han

The handset has not yet been registered or was de -registered due to the registration of an additional handset

e than six DECT registrations).

(mor

dset in base" flashes on the display.

¥ Register the handset again (¢ page 39).

The handset does not ring.

1. The ringtone is deactivated.

¥ Activate ringtone (¢ page 28).

2. Call forwarding is set.

¥ Deactivate call forwarding (¢ page 45).

3. The phone does not ring if the caller has withheld his number.

¥ Activate the ringtone for unknown calls (¢ page 30).

4. The phone does not ring during a specific period or for certain numbers.

¥ Check time control for external calls (¢ page 30) .

You cannot hear a ringtone/dialling tone from the fixed line network.

The phone cord supplied has not been used or has been replaced by a new cord with the wrong pin

onnections.

¥ Please always use the phone cord supplied or ensure that the pin connections are correct when

purchasing from a retailer (

The connection always terminates after approx. 30 seconds.

A repeater has been activated or deactivated (

¢ page 62).

¥ Switch the handset off and back on again (¢ page 16).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

¥ Repeat the process, reset the system PIN to 0000 if required (¢ page 32).

esolved if you take the complete device (base

¢ page 31).

Page 60

Faults and self-help with troubleshooting

Forgotten system PIN.

¥ Reset the system PIN to 0000 (¢ page 32).

The other party cannot hear you.

The handset is "muted".

¥ Activate the microphone again (¢ page 23).

The caller's number is not displayed.

1. Calling Line Identification (

CLI) is not approved for the caller.

¥ The caller should ask the network provider to enable Calling Line Identification (CLI).

2. Caller display (CL

IP) is not supported by the network provider or is not enabled for you.

¥ Caller display (CLIP) is enabled by the network provider.

3. Your telephone is connected via a PABX or a router w transmit all information.

ith an integrated PABX (gateway) that does not

¥ Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until the device restarts. ¥ Check the settings on the PABX and activate phone number display, if necessary. To do this, search for

terms such as CLIP, calling line identification, phone number identification, caller ID, etc. in the system's user guide or ask the system manufacturer.

You hear an error tone when keying an input.

Action has failed/invalid input.

¥ Repeat the process.

Read the display and refer to the user guide if necessary.

You cannot listen to messages

Your PABX is set to pulse dialling.

on the network mailbox.

¥ Set your PABX to tone dialling.

only Aton CLT116:

No time is specified for a message in the call list.

Date/time are not set.

¥ Set the date/time (¢ page 12).

The answer machine repor

1. You have entered the wrong system PIN.

ts "Invalid PIN" during remote operation.

¥ Repeat input of system PIN.

2. The system PIN is still set to 0000.

¥ Set the system PIN to something other than 0000 (¢ page 32).

The answer machine is not r

The memory is full.

ecording any messages/has switched to answer only mode.

¥ Delete old messages. ¥ Play back new messages and delete.

Page 61

Faults and self-help with troubleshooting

Approval

This device is intended for analogue telephone connection in the Swiss network.

Country-specific requirements have been taken into consideration.

If you have any questions about the differences betw contact your specialist dealer or network provider.

Swisscom hereby declare that this device meets the esse regulations laid down in Directive 1999/5/EC

The Declaration of Conformity can be found on the following website: www.swisscom.ch.

een the public phone networks, please

ntial requirements and other relevant

Exclusion of liability

Your handset display has a resolution of 128 x 160 pixels. Each pixel consists of three sub-pixels (red, green, blue).

It may be the case that a pixel is incorrectly c This is normal and no reason for a warranty claim.

The following table shows the number of pixel errors that may occur without leading to a wa

rranty claim.

Description Maximum number of permitted pixel errors

Colour illuminated sub-pixels 1

Dark sub-pixels 1

Total number of coloured and dark sub-pixels 1

ontrolled or has a colour deviation.

Note

Signs of wear on the display and housing are excluded from the warranty.

Page 62

Appendix

Care

Wipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths.

Never

use a dry cloth; this can cause static.

In rare cases, contact with chemical substances can cause changes to the device’s exterior. Due

o the wide variety of chemical products available on the market, it was not possible to test all

t substances.

Impairments in high-gloss finishes can be carefu phones.

lly removed using display polishes for mobile

Contact with liquid

If the device comes into contact with liquid:

isconnect the power supply.

1 D 2 Remo 3 Allo 4 Da 5 P

6 Do not

When it has fully dried out, you will normaly be able to use it again.

ve the batteries and leave the battery compartment open.

w the liquid to drain from the device.

b all parts dry.

lace the device in a dry, warm place for at least 72 hours (not in a microwave, oven etc.)

with the battery compartment open and the keypad facing down (if applicable).

switch on the device again until it is completely dry.

Page 63

Appendix

Technical data

Batteries

Technology: 2 x AAA NiMH Voltage: 1.2 V Capacity: 800 mAh

Handset operating times/charging times

The operating time of your Aton depends on the capacity and age of the battery and the way it is used. (All times are maximum possible times).

Standby time (hours) * 320 *

Talktime (hours) 14

Operating time for 1.5 hours of calls per day (hours) * 130 *

Charging time in base (hours) 8.5

Charging time in charging cradle (hours) 7.5

* No Radiation deactivated, without display backlight in idle status ** No Radiation activated, without display backlight in idle status

170 **

100 **

Base power consumption

Aton CL116 Aton CLT116

In standby mode – Handset in charging cradle – Handset outside charging cradle

During a call approx. 0.65 W approx. 0.75 W

approx. 1.0 W approx. 0.5 W

approx. 1.0 W approx. 0.65 W

Page 64

Appendix

1unused 2unused 3a 4b 5unused 6unused

1) Space

2) Line break

1x 2x 3x 4x 5x 6x 7x 8x 9x 10x

 1

2 abc2дбавгз 3 de f3ëéèê 4 gh i4ïíìî 5 jkl5 L mno6цсутфх M pq r s 7ß N t uv8üúùû O wxyz 9 яэжше Q .,?! 0

General specifications

DECT

DECT standard Supported

GAP standard Supported

No. of channels 60 duplex channels

Radio frequency range 1880-1900 MHz

Duplex method Time division multiplexing, 10 ms frame length

Repetition frequency of the transmission

pul

Duration of the transmission pulse 370 μs

Channel grid 1728 kHz

Bit rate 1152 kbit/s

Modulation GFSK

Language code 32 kbit/s

Transmission power 10 mW average power per channel, 250 mW pulse power

Range Up to 40 m indoors, up to 250 m outdoors

Base power supply 230 V ~/50 Hz

Environmental conditions for operation +5°C to +45°C, 20% to 75% relative humidity

Dialling mode DTMF (tone dialling)/PD (pulse dialling)

100 Hz

Pin connections on the telephone jack

Character charts

Standard characters

Press the relevant key the number of times indicated.

Page 65

Accessories

Handset/charging cradle Aton CL116/CLT116

u Brilliant sound quality in handsfree mode u 1.8" TFT colour display u Directory for 200 entries u Talk/standby time of up to 20 hrs/250 hrs, standard bat-

teries

u Screensaver (analogue and digital clock) u ECO-DECT u Alarm clock u Calendar with appointment scheduler u Night mode with time-controlled ringtone deactivation u No interruptions from anonymous calls u Baby monitor, one touch call

L410 handsfree clip for cordless telephones

u Complete freedom of movement when making calls u Practical clip fastening u Perfect sound quality in handsfree mode u Simple call transfer from handset u Weight approx. 30 g u ECO-DECT u 5 volume settings u LED status display u Talk/standby time of up to 5 hrs/120 hrs u Ranges in buildings up to 40 m, outdoors up to 250 m

Accessories

RTX 4002 Repeater

You can use the Repeater to increase the receiving range between your handset and the base.

All accessories and batteries are available from your phone retailer or on the following website: www.swisscom.ch.onlineshop.

Only use original accessories. This will avoid possible also ensure that all the relevant regulations are complied with.

health risks and damage to property, and

Page 66

Index

Access code (PABX) . . . . . . . . . . . . . . . . . . . 50

Accessories Activating

answer machine answer machine (remote operation) message LED

two-way recording Address book, see Phonebook Advisory tones Alarm clock Alert tone (beep) Anniversary

displaying missed Announcement Announcement (answer machine) Anonymous Anonymous calling Anonymous calls off Answer call key Answer machine

activating/deactivating

answer machine list

deleting individual messages

language for the voice prompt

mode

playing back messages

recording a personal announcement/

remote operation

skip-back function

time control

two-way recording Appointment

displaying missed Approval Area code

setting own area code Assigning number key Auto Answer

. . . . . . . . . . . . . . . . . . . . . . . . . . 63

. . . . . . . . . . . . . . . . . . . 34

. . . 36

. . . . . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . .36

. . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . 42

. . . . . . . . . . . . . . . . . . 47

. . . . . . . . . . . . . . . . . . . . . . 34

. . . . 34, 35

. . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . 2, 34

. . . . . . . . . . . . . . . . . 18

. . . . . . . 2, 36

. . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . 2, 35

advisory message

. . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . .36

. . . . . . . . . . . . . . . . . . 47

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

. . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . 28

Baby monitor. . . . . . . . . . . . . . . . . . . . . . . . 48

Backlight, display Base

changing changing name changing system PIN connecting to power/

telephone network restoring to default setting setting up wall mounting

Base station

changing the settings setting the ringtone

Battery

charging charging status display

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

icon inserting

Beep (alert tone) Best base Birthday, see Anniversary

. . . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . 32

. . . . . . . . . . . . . 8

. . . . . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . . . . . 7

. . . . . . . . . . . . . . . . . . . . . . 8

. . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . 10

. . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Call

accepting accepting automatically calling anonymously diverting (ans. mach.) external forwarding (ans. mach.) internal participant listening in picking up from answer machine transferring (connecting) transferring internally (connecting) two-way recording

Call forwarding (CF) Call lists

deleting an entry

Call protection Call redirection

. . . . . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . 28

. . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . 41

. . . . . 36

. . . . . . . . . . . . 40

. . . . 40

. . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . 45

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . . 23, 30

. . . . . . . . . . . . . . . . . . . . . . 45

Page 67

Index

Call screening during

recording (ans. mach.) . . . . . . . . . . . . 35

Call swapping

two external calls

Call waiting

external call external during an internal call internal during an external call

Callback

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Calling

anonymous external

. . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . . . . . . . 40

internal

Calling Line Identification

withholding

Cancel

Care Care of the device CF, see Call forwarding Changing

Character charts Charge status indicator Charge status of the batteries Charging cradle (handset)

Charging time of handset CLIP CLIR Colour scheme Combox Conference call

Connecting the base station

Connecting the headset Connections with the base Consultation call

Contact with liquid

. . . . . . . . . . . . . . . . . . . . . . . . . . 24

callback

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

dialling mode display language name of the handset phone settings ringtone settings

. . . . . . . . . . . . . . . . . . . . . . . . . . 26

system PIN

connecting setting up

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

two external calls

to the PABX to the router

ending

. . . . . . . . . . . . . . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . 24

external

. . . . . . . . . . . . . . . . . . . . . . . . . . . 40

internal

. . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . 23, 24

. . . . . 21, 41

. . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . 60

. . . . . . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . . 62

. . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . . . . . . . . . . . . . . . . . . . 7

. . . . . . . . . . . . . . 61

. . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . . . . . 60

Contactability Contents of the package Control key Correcting incorrect entries Correction of incorrect entries Customer care Customer service

. . . . . . . . . . . . . . . . . . . . . . . 45

. . . . . . . . . . . . . . . 7

. . . . . . . . . . . . . . . . . . . . . . . 1, 16

. . . . . . . . . . . . 19

. . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . . . . 56

. . . . . . . . . . . . . . . . . . . . 56

Deactivating

answer machine baby monitor internal listening in message LED two-way recording wireless module

Default setting Deleting

announcement for answer machine

De-registering (handset) De-registering the handset Dialling

from the call list using speed dial using the redial list with directory

Dialling pause Directory

saving entry

Display

activating/deactivating

new message backlight changing display language colour scheme network mailbox message number (CLI/CLIP) phonebook memory screensaver setting setting the backlight

Display icons Display keys

assigning

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

icons

Displays

missed appointments/anniversaries

Diverting (ans. mach.) Diverting a call

to answer machine.

DTMF (tone dialling)

. . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . . . . . . 49

. . . . . . . . . . . . . . . . . 41

. . . . . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . 32

. . . . . . . . . . . . . . 40

. . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . . . 42

. . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . 18, 38

. . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . 43

. . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . . . 1, 17

. . . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . 50, 51

. . . 35

. . . 47

Page 68

Index

Earpiece profile . . . . . . . . . . . . . . . . . . . . . . 28

Earpiece volume Echo

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

ECO DECT (Eco Mode plus) Eco Mode plus / Eco- Mode +

(deactivating wireless module) End call key End call/End key Ending a conference call Entering special characters Entering special letters Entering text Entering umlauts Exclusion of liability External External call

call waiting transferring internally (connecting)

External calls

time control for ringtone

. . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . 33

. . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . 41

. . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . 59

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . 23, 24

. . . . 40

. . . . . . . . . . . . 30

Factory settings . . . . . . . . . . . . . . . . . . . . . . 32

Field strength Flash time

. . . . . . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Getting started. . . . . . . . . . . . . . . . . . . . . . . . 7

Handset

advisory tones changing name changing the settings changing to a different base changing to best reception colour scheme connecting the charging cradle display backlight display language earpiece volume idle status

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

list muting paging registering on another base restoring to default setting screensaver searching for setting

. . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . 26

. . . . . . . . . . 39

. . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . 9

. . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . .11, 26

. . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . 39

. . . . . . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

setting up speaker volume switching on/off transferring a call use as a baby monitor

using multiple Handsfree mode Handsfree volume Hash key Headset socket Hearing aids Help Hold music

. . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

. . . . . . . . . . . . . . . . . . . . . . . . . 29

Icon

alarm clock

Icons

displaying new messages on display keys

status bar Idle status, returning to Internal

listening in

making calls Internal call

call waiting Internal consultation call

. . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . 53

. . . . . . . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . 41

. . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . . 21, 41

. . . . . . . . . . . . . . 40

Key

assigning to a function or number Key 1 (fast access) Keys

Answer call key

answer machine

control key

display keys

End call key

End call/End key

fast access

Hash key

Message key

On/off key

Recall key

Star key

. . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . . 1, 16

. . . . . . . . . . . . . . . . . . . . . 1, 17

. . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . 30

Page 69

Index

Language

Liquid List

List entry Listening in to an external call Locking/unlocking the keypad Lower/upper case

. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

display

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

accepted calls answer machine call lists handsets missed calls outgoing calls

. . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . 41

. . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . 19

Mains adapter . . . . . . . . . . . . . . . . . . . . . . . . 5

Making calls

accepting a call external

internal Managing the calendar Marked characters. Medical equipment Melody

ringtone for internal/external calls Memory in the phonebook Menu

opening

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

tree Message key Message length (ans. mach.) Message lists

opening Microphone Missed anniversaries/appointments Missed call Mounting the base on the wall Muting the handset

. . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . 46

. . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . 5

. . . . . 28

. . . . . . . . . . . . . 43

. . . . . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . 35

. . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . 47

. . . . . . . . . . . . . . . . . . . . . . . . . . 44

. . . . . . . . . . . 8

. . . . . . . . . . . . . . . . . . . 23

Network mailbox . . . . . . . . . . . . . . . . . . . . . 38

Network services

during an external call

provider-specific

. . . . . . . . . . . . . . . . . . . . . . . . . . . 23

setting

. . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . 23

Number

copying to the phonebook displaying caller's number (CLIP) entering with the phonebook

Numbers

entering

. . . . . . . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . 44

. . . . . . 22

. . . . . . . . 44

On/off key . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

One touch call Operating time of handset Order in the phonebook Outside line code Outside line code (PABX)

. . . . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . 61

. . . . . . . . . . . . . . . 42

. . . . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . . 50

PAB X

connecting base

. . . . . . . . . . . . . . . . . . . . . . . . . . . 51

pauses saving access code setting dialling mode setting flash time switching to tone dialling

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Pagin g Pause

after access code after line seizure

after Recall key PD (pulse dialling) Phone

restoring to default setting

setting Phone number display, notes Phonebook

Pin connections Playing back

Playing back message (ans. mach.) Power consumption Protection against unwanted calls Protection from anonymous callers Pulse dialling

. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

copying number from text

opening

order of entries

sending entry/list to handset

sending to handset

using to enter numbers

announcement (answer machine)

message (answer machine)

. . . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . 32

. . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . 42

. . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . 42

. . . . . . . . . 43

. . . . . . . . . . . . . . . . . 43

. . . . . . . . . . . . . 44

. . . . . . . . . . . . . . . . . . . . . . 62

. . . . . 35

. . . . . . . . . . 35

. . . . 2, 35

. . . . . . . . . . . . . . . . . . 61

. . . . . . . 30

. . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . 50

Page 70

Index

Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

reducing Recall key Reception booster, see Repeater Recording

announcement (answer machine)

two-way recording Redial list Redirect, see Call forwarding Registering (handset) Registering other handsets Registering the handset Remote operation Repeater Restoring to default setting Restoring to factory settings Ring delay Ringtone

changing

melody for internal/external calls

setting the volume

silencing for anonymous calls

time control for external calls Ringtones Router

connecting base station

. . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . 1, 51

. . . . . 34

. . . . . . . . . . . . . . . . .36

. . . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . .39

. . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . . . . . . 35

. . . . . . . . . . . . . . . . . . . . . . 28, 29

. . . . . . 28

. . . . . . . . . . . . . . . . .29

. . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . 28

. . . . . . . . . . . . . 50

Safety precautions. . . . . . . . . . . . . . . . . . . . . 5

Saving a number in the directory Screensaver Searching

handset

in directory Selecting an entry

Sending

phonebook entry to handset Setting an appointment Setting options

answer machine

phone Setting the date Setting the display language Setting the time Setting up

handset Setting up the answer machine

. . . . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . . . . . . 43

from the phonebook

. . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . 12, 55

. . . . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . 42

. . . . . . . . . . . . . . 43

. . . . . . . . . 43

. . . . . . . . . . . . . . . 46

. . . . . . . . . . . 26

. . . . . . . . . 34

Signal tone, see Advisory tones Skip-back function (ans. mach.) Snooze mode (alarm) Sound, see Ringtone

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Speaker Speed dial Star key Status bar

Switching microphone (handset)

System PIN

. . . . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

icons

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . . . . . 23

on/off

changing resetting

. . . . . . . . . . . . . . . . . . . . . . . . . 32

. . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . . . . . 32

. . . . . . . . . 37

Technical data . . . . . . . . . . . . . . . . . . . . . . . 61

Tel ep ho ne

operating Telephone jack, pin connections 3-way conference call

two external calls Three-way conference call

ending Time control

ringtone for external calls Time control (ans. mach.) Tone dialling (DTMF) Transferring an external call internally Two-way recording Two-way recording (ans. mach.)

. . . . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . 62

. . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . . . 41

. . . . . . . . . . . 30

. . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . 50, 51

. . . . 40

. . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . 36

Unknown . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Upper/lower case

. . . . . . . . . . . . . . . . . . . . 19

Viewing network mailbox message. . . 18, 38 VIP ringtone Volu me

handset handsfree/

ringtone

. . . . . . . . . . . . . . . . . . . . . . . . . 42

earpiece volume

. . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . 29

Warning tone, see Advisory tones Warr anty

. . . . . . . . . . . . . . . . . . . . . . . . . . . 56

XES mode . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Page 71

Page 72

dt/fr/it 02/2014

Swisscom Aton CL116, Aton CLT116 User Manual

Overview of handset

Overview of base station

Contents

Safety precautions

Environmental benefits of the Aton CL116/CLT116

Getting started

Checking the contents of the package

Setting up the base station and charging cradle (if included)

Connecting the base station to the telephone network and the mains power supply

Mounting the base station on the wall (optional)

Connecting the charging cradle (if included)

Setting up the handset for use

Changing the display language

Setting the date and time

Connecting the headset

What would you like to do next?

Understanding the operating steps in the user guide

Getting to know your phone

Switching the handset on/off

Locking/unlocking the keypad

Control key

Display keys

Menu guidance

Message lists

Entering numbers and text

Making calls

Making an external call

Accepting a call

Accepting/rejecting call waiting

Caller display

Handsfree mode

Adjusting the loudspeaker volume

Switching the microphone on/off (muting)

Using provider-specific functions (network services)

Adjusting the telephone settings

Changing the display language

Setting your country and local area codes

Adjusting the handset display settings

Activating/deactivating Auto Answer

Setting earpiece profiles

Setting the handset ringtones

Setting the base station ringtone (Aton CLT116 only)

Activating/deactivating advisory tones

Activating/deactivating music on hold

Protection against unwanted calls

Quick access to numbers and functions

Operating a repeater

Changing the system PIN

Restoring phone to default setting

ECO DECT (Eco Mode plus)

Reducing transmission power (radiation)

Answer machine (Aton CLT116)

Activating/deactivating the answer machine

Setting up the answer machine

Playing back messages

More answer machine functions

Operating when on the move (remote operation)

Network mailbox (Combox)

Multiple handsets

Registering handsets

Using the handset on multiple bases

De-registering handsets

Locating a handset ("Paging")

Changing the handset name and internal number

Making internal calls

Listening in to an external call

Phonebook (Address book)

Managing directory entries

Displaying the number of entries that are available in the directory

Selecting a phonebook entry, searching in the phonebook

Transferring an entry/phonebook to another handset

Call list

Transferring a displayed number to the phonebook

Transferring a number from the phonebook

Contactability

Calendar

Saving appointments to the calendar

Signalling of appointments/anniversaries

Displaying missed appointments/anniversaries