Swisher PowerBlade PBB-7540 Assembly Instructions Manual

1-877-627-5860

ATV MOUNT KIT PBB-7540

Un-package and familiarize yourself with the contents.

1. Remove the outer bolts from the front and rear footrest support brackets.

2. Loosely assemble the mounting kit with the left and right mount angle brackets
attached as shown above. Place the front of the angle brackets behind the
aluminum front footrest support brackets and place the rear angle brackets behind
the aluminum rear footrest support brackets and loosely attach the mount assembly
in this location with the bolts previously removed in step 1.

3. Center and square the mount plate and tighten all hardware securely.

12462 Rev.

4

2

3

9

1

8

5

7

6

Item Description Part No.

1 Mounting Plate 12458TK
2 Attachment Plate RH 12460TK
3 Attachment Plate LH 12461TK
4 5/16 - 18 Carriage Bolt 10217
5 5/16 Washer NB275
6 5/18-18 Nylock Nut NB181
7 Clevis Pin 10305
8 Hair Pin NB127

10