Swisher PBY-5590 User Manual

PBY-5590

Yamaha Models 350 Bruin 400 Kodiak 450 Kodiak

May fit additional models see Master List

Partial Frame View

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

12985

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

1. Place the mount plate up against the bottom of the frame. The Blade Mounting Tabs should be pointing down and located toward the front of the ATV.

2. Center the blade mounting tabs, side to side, between the two foot rest pegs

3. Using the four U Bolts (Part 2) Attach the plate to the frame tubes.

4. Center plate under the bike and tighten the bolts securely

Item # Description Part #

1 Mount Plate 10617TK 2 U Bolt 10633 3 Washer Flat NB275 4 Nylock Nut 5/16-18 NB181 5 Hair Pin #39 NB127 6 Clevis Pin 10305