Swisher PBY-5540 User Manual

PBY-5540

Yamaha Models 350 FWT Big Bear 96 & Older 350 FWT SE Big Bear 97 350 OUH Big Bear 98 & Older 400 FEW Kodiak 98 & Older

May fit additional models see Master List

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

12991

Partial Frame Illustration

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed.

Blade Mount Kit

1. Separate and Identify Right Hand Mounting Bracket and the left Hand Bracket which has a 15 degree bend in the Tab.

2. The Brackets are mounted with the tabs facing forward.

3. Left side, Remove the two bolts at the frame holding the left footrest. Place the Left Hand Bracket on the outside of the footrest and install bolts using the new longer bolts and lock washers provided.

4. Repeat with the Right hand side.

5. Tighten the bolts securely. Retain the old bolts for replacement if brackets are removed.

Item # Description Part #

1 Right Side Mount Plate 10622TK 2 Left Side Mount Plate 10499TK 3 Lock Washer 10146 4 Bolt M10 10304 5 Hair Pin #39 NB127 6 Clevis Pin 10305