Swisher PBY-5530 User Manual

PBY-5530

Yamaha Models YFM 350 YWBJ Big Bear 97-99 YFM 350 UBL Big Bear 99 YFM 350 Raptor YFM 350 (FX) Wolverine 04 & Older YFM 400 Big Bear 00-06 YFM 400 FWBL Kodiak 99

May fit additional models see Master List

Partial Frame View

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate(s) for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

13054

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

1. With the mounting tabs toward the front as shown, mount the brackets using the U Bolts (item

2) which mount over the frame rails

2. Snug the plate to the frame and slip it rearward to line up with the Footrest weld.

3. Tighten all hardware

Front of ATV

Item # Description Part #

1 Mount Plate 10497TK 2 U Bolt NB724 3 Washer Flat NB275 4 Nylock Nut 5/16-18 NB181 5 Hair Pin #39 NB127 6 Clevis Pin 10305