Swisher PBS-4521, PBS-4525 Parts list

PBS-4521 & PBS-4525

Suzuki Models LTF 250 2X4 01 &Older LTF 280 King Quad 4X4 98& Older LTF 300 King Quad 4X4 99-01 LT 4 WD 01 & Older

May fit additional models see Master List

Partial Frame Illustration

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

13041

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed.

Blade Mount Kit

1. Separate and Identify the parts to the Blade Mount and the Skid Plate.

2. Place Skid Plate against frame with the slots facing forward and the front hole on the right hand side. Locate the holes in the frame that attach the Skid Plate and loosely install the M8 bolts and nust provided. Leave loose.

3. Hook the “U Bolts” over the frame rear cross member aligning with the slots in the Skid Plates

4. Hook the remaining two “U bolts” over the sides of the frame in the general area of the slots in the mounting plate.

5. Place the mounting plate up to the frame with the mounting tabs as shown attach “U bolts” and tighten securely.

6. Tighten all hardware.

Item # Description Part #

1 Mount Plate 10620TK 2 Skid Plate 10463TK 3 U Bolt NB724 4 Bolt M8-1.25 X25 NB723 5 Hair Pin #39 NB127 6 Clevis Pin 10305 7 Flat Washer NB275 8 Nyloc Nut NB181 9 Nut M8 MB718