Swisher PBP-3520 Parts list

PBP-3520

Polaris Models Trail Blazer 250 2X4 94-98 Trail Boss 250 94-99 250 2X4 / 4X4 / 6X6 89-93 300 2X4 / 4X4 / 6X6 94-95 350 2X4 / 4X4 / 6X6 93 & Older 400 2X4 / 4X4 95 & Older Sport 400 2X4 97-98 Scrambler 400 4X4 95-97 Sportsman 400L 4X4 94-97 Explorer 400 4X4 95 Big Boss 400 6X6 95-00 Mag 425 2X4 / 4X4 / 6X6 98 & Older Scrambler 500 4X4 97 Big Boss 500 6X6 98-99

May fit additional models see Master List

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

13059

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

1. Place the Carriage Bolts into the Mounting Blocks and insert them into the footrest channel on each side of the ATV.

2. Place the mount plate up against the frame with the front toward the front of the ATV

3. Attach the Nylock Nuts to the Carriage Bolts and snug.

4. Center plate under the bike and Tighten all bolts securely.

Item # Description Part #

1 Mount Plate 10524TK 2 Mounting Block 10420TK 3 Carriage Bolt 10197 4 Nylock Nut 5/16-18 NB181 5 Clevis Pin 10305 6 Hair Pin #39 NB127

Front