Swisher PBK-2575 Parts list

PBK-2575

Kawasaki Models 360 Prairie 2X4 4X4 02-06 650 Prairie 4X4 02-03 650 Brute Force 4X4 05-06 700 Twin Prairie 4X4 04

May fit additional models see Master List

Note: This kit combines PBK-2570 & PBK-2580

Partial Frame View

Front

Mounting Options

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate(s) for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

13099

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

This kit has been designed to fit a variety of ATV’s. Please determine which of the below mounting

method fits your model.

1. Remove your skid plate if so equipped. Lay the skid plate on top of the mounting plate and align hole “A”. If the Skid plate mounting holes line up with the other holes in the plate, go to step 2, If not, go to step 3.

2. Place the plate against the frame and install the M8 Bolts with washers supplied. Item 7 & 3. Tighten bolts securely.

3. Mounting to the Frame with U bolts. Place plate against the bottom of the frame and locate the U bolts. Attach the washers and nuts Items 3 & 4. Snug all bolts and check for alignment. If straight on the frame tighten all hardware.

Hole A

Front of ATV

Item # Description Part #

1 Mount Plate 10618TK 2 U Bolt NB724 3 Washer NB275 4 Nylock Nut 5/16-18 NB181 5 Hair Pin #39 NB127 6 Clevis Pin 10305 7 Bolt M8 X25 NB723