Swisher PBH-1590 Parts list

PBH-1590

Honda Models 350 Rancher 4X4 04-06 350 Rancher 2X4 04-06 400 Rancher 4X4 04-06

May fit additional models see Master List

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

13111

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

1. Assemble the Mounting Plate and the Support Plated as shown with the Carriage bolts, Washers, and nuts ( Item 3,5, and 6 ). Note slotted holes in the Mount plate face toward the front of the ATV.

2. Place the U Bolts over the frame in the general area of the mounting holes.

3. Place the mount Kit up against the frame and install the Washers and nuts to a snug position

4. After all hardware has been install check the alignment of the plate to the ATV

5. Tighten the bolts securely

Item # Description Part #

1 Mount Plate 10411TK 2 Support Plates 10412TK 3 Carriage Bolt 10197 4 U Bolt NB724 5 Washer NB275 6 Nylock Nut 5/16-18 NB181 7 Clevis Pin 10305 8 Hair Pin #39 NB127