Swisher PBH-1570 Parts list

PBH-1570

Honda Models

650 Rincon 4X4 03-06 700 Rincon Auto 06

May fit additional models see Master List

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

13117

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

1. Place mounting plate up against the b0ottom of the frame and locate the approximate location for the U bolts.

2. Place the U Bolts over the frame in the general area of the mounting holes.

3. Place the mount Kit up against the frame and install the Washers and nuts to a snug position

4. After all hardware has been install check the alignment of the plate to the ATV

5. Tighten the bolts securely

Item # Description Part #

1 Mount Plate 10408TK 2 U Bolt 10517 3 Washer NB272 4 Nylock Nut 3/8-16 NB182 5 Clevis Pin 10305 6 Hair Pin #39 NB127