Swisher PBH-1560 Parts list

PBH-1560

Honda Models TRX 500 Rubicon 04 & Older

May fit additional models see Master List

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

13055

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

1. After removing the front skid plate, place the mount plate up against the bottom of the frame.

2. Center the blade mounting tabs between the two foot rest pegs

3. Using the two U Bolts (Part 2) Attach the plate to the Front frame tubes.

4. Center plate under the bike and Snug the bolts.

5. Attach the rear of the plate using the bolts provided to the frame under the foot rest

6. Tighten all bolts securely.

Front

Item # Description Part #

1 Mount Plate 10406TK 2 U Bolt NB724 3 Bolt M8-1/25 X 25 NB723 4 Washer Flat NB275 5 Nylock Nut 5/16-18 NB181 6 Hair Pin #39 NB127 7 Clevis Pin 10305