Swisher PBH-1510 Parts list

PBH-1510

Honda Models TRX 300 2X4 & 4X4 00 & Older

May fit additional models see Master List

Front

Caution: Do not exceed 5 MPH with the blade or it’s brackets installed

Remove the mount plate for trail riding where extra ground clearance is needed

1602 Corporate drive P.O. Box 67 Warrensburg, MO 64093 1-877-627-5860

12996

Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need

to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..

1. Place the mount plate up against the bottom of the frame.

2. Center the blade mounting tabs between the two foot rest pegs

3. Using the four U Bolts (Part 3) Attach the plate to the frame tubes.

4. Slide the plate back untill it makes contact with the front of the foot pegs

5. Tighten the bolts securely

Item # Description Part #

1 Mount Plate 10326TK 2 U Bolt NB724 3 Washer Flat NB275 4 Nylock Nut 5/16-18 NB181 5 Hair Pin #39 NB127 6 Clevis Pin 10305