Swingline 300X User Manual

STACK-AND-SHRED300X&300M

™

SHREDDERS

start here

démarrez ici empieza aquí comece aqui

2min

STACK-AND-SHRED300X&300M

SHREDDERS

English instruction manual 6 Francais manuel d’utilisation 14 Español manual de instrucciones 22 Português manual de instruções 30

™

English

autofeed technology

The Stack and Shred 300X and 300M has been designed to automatically shred up to 300 sheets from the auto-feed chamber and up to 8 sheets through the manual feed slot. The auto-feed mechanism has been designed to handle paper fastened with staples and paper clips and to only pull a few sheets of paper into the cutting mechanism to minimise the risk of paper jams.

To guard against injury, the following basic safety precautions must be observed in the set-up of this product.

• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not

likely to trip up a passer by.

• Any attempt to repair this unit by unqualied personnel will invalidate the warranty. Please return to

supplier.

• Unplug your shredder before moving it or when it is not in use for an extended period of time.

• Do NOT operate with a damaged power supply cord or plug, after it malfunctions, or after it has

been damaged in any manner.

• Do NOT overload electrical outlets beyond capacity as this can result in re or electrical shock.

• The socket-outlet should be installed near the equipment and shall be easily accessible.

• Do NOT alter the attachment plug. The plug is congured for the appropriate electrical supply.

• Do NOT use near water.

• Do NOT use aerosol dusters or cleaners.

• Do NOT spray anything into the shredder.

• Do NOT load the auto-feed chamber with unopened junk mail, magazines, bound documents etc. Although this shredder has been designed to comply with UL 60950-1 EN 60950-1 safety standards

including the “probe accessibility tests”, do not operate the shredder near children or pets.

6 register this product online at www.accobrands.com

warning symbols

Safety First

English

This means keep children away from shredder.

This means you should be careful because long hair can become entangled in the cutting head.

This means be careful of ties and other loose clothing which could become entangled in the cutting head.

This means be careful of loose jewellery which could become entangeld in the cutting head.

This means don’t reach into the feed opening of the cutting head.

control panel and indicators

Reverse

Jam Free indicator – This alerts

the user when too much paper is fed into the manual feed slot (see section on Jam Free Technology).

Paper Loading Door/Bin Door Open or Bin Full indicator –

This means either:

• Loading door is open

• Bin is open

• Bin is full

Lock indicator – This means the paper loading door is locked (during shredding).

Cool Down indicator – This means the machine is cooling down.

Auto

This means no aerosols.

Sheet capacity of manual feed

entry slot.

This means the shredder can accept small staples.

This means the shredder can accept small paperclips.

This means no oil lubrication, use Swingline oil sheets only.

Continuous Jam Boost

Power On indicator – This means the machine is turned on.

Paper jam indicator – This means there is a paper jam in the auto feed chamber.

If this symbol is ashing the

shredder is attempting to clear a paper jam automatically.

If this symbol is permanently illuminated red please follow the

instructions under ‘Rare Occasion

of Jamming’.

Loading Door Locking Mechanism – PIN Password Buttons – Enter a four digit code

to lock the loading door during shredding.

STACK-AND-SHRED 300X&300M™ SHREDDERS 7

English

Stack and Shred 300X/300M shredding capability

Stack and Shred 300X/300M CAN shred the following:

• 300 sheets

• Stapled paper, 25mm within the corner

• 26/6 and 24/6 or smaller staples

• Small sized paper loaded centrally

• 300 sheets

• Paper clip paper, 25mm within the corner (300M through manual feed slot ONLY)

• Capable of shredding small/medium paper clips (max. wire thickness = 0.9 mm)

• >80/100gsm paper (through manual feed slot ONLY)

• A3 folded in half max. 2 sheets

• 300 sheets

• 80 gsm paper

- Letter and Legal

- A3 single sheet folded in half to make A4

Stack and Shred 300X/300M CAN shred (through the manual feed slot):

Thick paper or card.

Unopened mail

(e.g. junk mail).

Multiple folded sheets (e.g. A3 sheets folded in half).

Glossy paper or a sheet covered with print on both sides.

Stack and Shred 300X/300M CANNOT shred the following:

Heavy duty staples. Check the staple leg length is not greater than 6mm.

Bulldog clips

Adhesive labels.

8 register this product online at www.accobrands.com

Large clips.

Check the length of the paperclip is not longer than 32mm.

Bound documents

Magazines or other documents bound by multiple staples or clips.

Plastic sheets,

laminated documents, plastic folders.

English

bin or loading door open safety function

As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop and the bin full indicator will illuminate (

intelligent help

1 In the unlikely event of the shredder jamming, the Stack and Shred 300X and 300M will stop

shredding, and the jam icon will blink in orange.

2 The shredder will illuminate the FWD (

to clear the jam.

3 If the jam cannot be intelligentally cleared, the jam icon (

open the auto feed chamber to clear any jammed material.

) and REV (

) buttons in the sequence necessary

) will illuminate in red. At this point

automatic jam clearance

Intelligent Jam Clearance: In the unlikely event of the shredder jamming, the Stack and Shred 300X and 300M will automatically reverse and forward the engine three times to clear a jam. During this

operation the Paper Jam indicator will ash (

1. operation

1 Unpack the product. 2 Connect the shredder to mains supply. 3 Ensure the ON/OFF button on the back of the machine is in the ON position, which will

illuminate the blue standby symbol (

4 To commence shredding, press the Auto button (

You are now ready to shred.

5 To load the shredder, simply lift the loading door handle to open the loading door and insert

documents. You can open the door further to 90 degrees for easier access if required Load up to 300 sheets at a time into the feed chamber. Do not ll above the 300 MAX level, this could

damage the shredder.

6 The shredder will start the shredding cycle automatically ONLY after closing the loading door.

If there is still paper in the Autofeed chamber after rst attempt, open and re-close the paper

loading door a second time.

Attention: If required you can now lock the loading door by entering a 4 digit code (see Locking

the Paper Loading Door section).

7 If you only have up to 8 sheets to shred, you can use the manual feed slot, provided the auto

feed chamber is empty.

8 Insert paper to be shredded into the feed area. The shredder will detect the paper and start

automatically.

9 If the shredder is left in auto mode for more than 2 minutes without being used, the shredder will

automatically turn back to sleep mode in order to save power.

10 The shredder will automatically ‘wake up’ from sleep mode when paper is inserted into the

shred mouth or you open the loading door. There is no need to press the Auto button (

), which sets the shredder into auto mode.

STACK-AND-SHRED 300X&300M™ SHREDDERS 9

English

2. reverse function

1 Should you wish to reverse paper out whilst shredding, a reverse button (

your convenience.

2 Reverse the paper out then turn the machine o using the ON/OFF switch at the rear of the

shredder. Remove the paper from the manual feed slot (if being used) or open the loading door, remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.

3 To resume shredding, turn the shredder on using the ON/OFF switch at the rear of the shredder.

Return the switch to the auto position (

) has been tted for

3. locking the paper loading door

For additional security the paper loading door can be locked during the shredding of condential

material. To lock shredder:

Place documents in tray. Close paper loading door.

Press any 4 digits. REMEMBER YOUR CODE!

Shredder unlocks automatically when:

• 4 digit code is re-entered.

• Shredding is complete.

• Shredder is inactive for 30 minutes (but documents remain in tray)

4. CD/DVD shredding

A separate CD/DVD tray is provided to collect the shredded CD/DVD shards, ensure that this is

correctly mounted onto the bin before shredding.

1 Lift up the paper loading door. 2 Always insert CDs/DVDs in the CD/DVD slot. Only shred one CD/DVD at a time. 3 Close the paper loading door. 4 Empty the CD/DVD bin after 8 CDs/DVDs to avoid waste spilling over into the paper waste bin.

5 Remove the CD/DVD tray before recommencing to shred paper.

5. credit card shredding

1 Lift up the paper loading door. 2 Insert the credit card into the roller as shown. Only shred one credit card at a time. 3 Close the paper loading door.

Swingline encourages customers to recycle shredded paper.

Please note that shredded paper cannot be recycled if mixed with credit card shards. If recycling, please separate shredded paper and credit cards.

10 register this product online at www.accobrands.com

English

6. bin full

The shredder will not function when the bin is full and the bin full symbol (

You should empty the bin.

• Pull open the bin slowly to empty.

• Push the empty bin back into place and press the auto button to resume shredding.

) is illuminated.

over heating

If the Stack and Shred 300X and 300M is used continuously for over 16 minutes the shredder may

overheat and the cool down indicator will ash red (

When the shredder is ready to be used the thermometer symbol will no longer illuminate. If the shredder needs to cool down while shredding, no action is needed. The shredder will automatically restart shredding paper once it has cooled down after periods of continuous use. All you need to do is ensure paper is loaded into the chamber and the bin is empty when the machine is cooling down.

). Please allow the shredder to cool down.

7. self-cleaning cutters

After emptying and replacing a full bin, the shredder will run in forward for 4 seconds, stop for 2 seconds and then reverse for 4 seconds to clear away any remaining paper from the cutter mechanism. This unique ‘self-cleaning’ mechanism is additional jam prevention technology from Swingline.

lubrication of the shredder

Only use oil sheets to lubricate. ACCO Brands accepts no liability for product performance or

safety when other types of lubricants are used on any part(s) of this machine. Insert the oil sheet

into the manual feed slot and NOT in the auto-feed chamber. Using an oil sheet in the auto-feed

chamber will contaminate the feed rollers preventing the auto-feed mechanism shredding. Follow the maintenance instructions if the rollers become contaminated. Do not directly oil the shredder.

STACK-AND-SHRED 300X&300M™ SHREDDERS 11

English

8. maintenance

The rollers on the auto-feed mechanism may become dirty over time, please wipe clean with a

dry cloth to maintain maximum product performance.

The auto-start infra-red sensor, located in the paper feed entry-slot, can occasionally become covered in paper-dust causing the shredder to run despite no paper being fed into the machine.

Switch the shredder o at the rear of the machine and carefully clean the sensor using a

cotton-swab.

service

We recommend these machines are serviced every 6 to 12 months by a Swingline service engineer – see back of this booklet for the contact details of your local service centre and for enquiries about maintenance contracts.

shredder accessories

We recommend that a paper waste sack for recycling shredded paper is used on all models.

Accessory Part Number Box Quantity

Recycling Waste Sack

Plastic Waste

Sack

1765029

1765010

100

FCC CLASS B NOTICE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

CANADA CLASS B NOTICE

This Class B digital apparatus complies with Canadian ICES-003

MODIFICATIONS Any modications made to this device may void the authority granted to the user by the FCC and/or by Industry Canada to operate this equipment.

Issue August 2013

Fusion is a registered trademark of ACCO Brands.

12 register this product online at www.accobrands.com

+ 26 hidden pages