Swiftpoint ProPoint Quick Start Guide
Quick Start Guide
ProPoint Features
Left-click (front)
Scroll-wheel
Docking
point
Right-click (center)
Middle-click (rear)
Middle finger
grip
LED
Thumb grip
Switch
USB charger/receiver
1.
Plug the USB charger/receiver into your computer.
2.
Charge your mouse for at least 2 minutes before using.
3.
Switch On using the switch on the bottom of the mouse.
Charging the ProPoint
To charge your ProPoint Mouse:
Plug the USB charger into a USB
1.
port on your computer or into
a USB charging accessory.
Dock the mouse onto the charger.
2.
The battery LED will flash green while charging and turns off
once fully charged. The first 30 seconds of charging will give
up to one hour of use, and a full charge can take up to 90
minutes, giving up to 4 weeks of use. To begin using the mouse,
move the switch on the underside to the ON position
When not using the mouse for brief periods, dock the mouse
on the USB charger so it maintains a charge.
The mouse should be fully charged periodically.
When not using the mouse for extended periods, move the
switch on the underside of the mouse to OFF
.
Connecting the ProPoint Via Bluetooth 4.0
Once the mouse is fully charged, you can pair it to your
computer via Bluetooth 4.0. Remove the USB charger/
receiver. Leave the mouse OFF for the first steps.
Go to Bluetooth device menu in your system settings
1.
- Windows: Settings > Devices > Add Bluetooth device
- MacOS/iOS: System Preferences/Settings > Bluetooth
Ensure Bluetooth is switched on on your device.
2.
3. Remove any existing “ProPoint” entries
in the list by selecting it, then select Remove.
4.
While holding down front button, move the switch
on the underside of the mouse to ON. Release the front
button once the LED starts to flash orange.
Note: If you hold the front button for more than 5 seconds,
the mouse will change to USB Receiver pairing mode and
flash green.
5. When “ProPoint” appears in the list of searched
devices, click on the device name to pair
with the device.
If you have a problem, cycle the On/Off switch and try again.
6.
If "ProPoint" does not appear make sure your system
supports Bluetooth 4 and Bluetooth is switched on.
Please note that Windows 7 does not support Bluetooth 4.0
Note:
If you connect your ProPoint Mouse via Bluetooth, you can
plug the USB charger/receiver into a USB charging accessory
rather than using one of your computer’s USB ports.
Connecting the ProPoint to iPad Applications
Pair your ProPoint to your iPad over Bluetooth, see above.
1.
Launch your supported remote desktop app, and start
2.
a remote session.
Connecting to more than one Bluetooth device
The ProPoint can store pairings with up to 3 Bluetooth
devices.
When switched on, the mouse will first try to reconnect with
the most recently used device. If this cannot be found it will
try to connect to the next device in the list.
If two or more of the ProPoint's current Bluetooth
connections are available nearby, you can swap between
them by holding the center button while you cycle power,
using the On/Off switch.
Connnecting the ProPoint Via the USB Receiver
To connect via the USB charger/receiver, plug the USB
charger/receiver into a port on your computer and move
the switch on the underside of the mouse from the OFF
to the ON position. The mouse will automatically connect
to your computer.
Configuring the Propoint on PC/Mac
IMPORTANT
Install the SWIFTPOINT CONTROL PANEL to configure
the Propoint mouse to perform exactly as you want it to.
Set the cursor speed, the scroll speed and direction,
assign button functionality and much more.
The driver will be updated periodically to give even more
functions later on, to make the Propoint the best mousing
experience you can have.
Open browser, click in URL box and type:
1.
www.swiftpoint.com/download-propoint-drivers
2.
Follow the on-screen instructions
For more tips and videos, visit www.swiftpoint.com/600
Using the Propoint
Hold the mouse with your thumb on the thumb grip and your
middle finger on the finger grip. Rest your index finger on the
front button
To right-click, move your index
finger to the center button
To middle-click, move your index
finger to the rear button
Use your index finger to roll
the scroll wheel
Right click
(center)
Middle click
(rear)
Left click
(front)
Tilt + Move Gestures Functions
To perform tilt gestures.
Tilt the mouse to the right
to engage the tilt gestures
and move the mouse
sideways, or backwards,
or forwards.
Tilt
Move mouse forwards - Scroll down
Move mouse backwards - Scroll up
Swipe mouse left - Left pan
Swipe mouse right- Right pan
Tilt + Middle Button Gesture Functions
Zoom In
PRESS Center ButtonTILT Mouse
Previous
Application
Zoom Out
All tilt gestures can be reassigned using the Swiftpoint Driver for
ProPoint, to enable different functions.
Next
Application
Tilt + Rear Button Gesture Functions
TILT Mouse
Previous Browser
Tab
All tilt gestures can be reassigned using the Swiftpoint Driver for
ProPoint, to enable different functions.
PRESS Rear Button
Next Browser Tab
Mac - Next Window
Presentation Mode
Presentation mode operates with Microsoft Powerpoint and
some other presentation applications.
Open your presentation and start the show.
Move the switch on the underside
of the mouse to PRESENT
Presentation Mode - Functions
Hold the mouse
in the palm
of your hand
and use your
thumb to operate.
Advance Slides/Left Click - Tap front button
Move cursor - Press and hold front button
Previous Slide / Arrow Up - Tap middle button
Laser Point - Press and hold rear button
Drawing Mode - Press and hold middle button
Application switcher - Press and hold rear then middle
buttons
Move the switch on the underside of the mouse to On to
use the mouse normally.
Specifications
Operating Systems
Windows 7, 8, 10 or higher
MacOS 10.4 or higher
Android 4.4 or higher
iOS 7 or higher, with compatible applications
Communications
USB Wireless (2.4GHz)
Bluetooth 4.0
Power
Li-Ion Battery 3.7V, 120mAh
Charging: USB Outlet, 5V , 130mA
Install the SWIFTPOINT CONTROL PANEL at
www.swiftpoint.com/download-propoint-drivers
Quick Start Guide V02 En © 2018 Swiftpoint Limited. All rights reserved.
Loading...