Sweex IP001 Quick start guide

English version

SWEEX.COM

4

IP001
Sweex USB Internet Phone with Display

Introduction

First of all, many thanks for purchasing the Sweex USB Internet Phone with Display. With this easy-to-connect telephone you can make calls via the
Internet. To ensure this product operates correctly, we advise you to carefully read this manual first. If despite this manual you still experience
problems during installation or operation of this product, go to www.sweex.com and look under the heading service & support.

Contents of the box

Prior to installation, check if all required parts are present. The following parts must be present in the box:

• USB Internet phone

• CD-ROM including drivers and extensive manual

If one of the above parts is missing, please contact the supplier.

Specifications

• Suitable for PC to PC and PC to telephone connections

• Supports: USB 1.1, no sound card needed

• Bus powered

• Caller ID for VoIP calls

• LCD and LED display

• Echo and noise suppression

• Full duplex communication

• Key sounds

• Pause dial tone function

System requirements

• Computer system with 200 MHz or higher processor speeds

• USB 1.1 or 2.0 connection

• 64 MB RAM memory

• 10 MB or more hard disk space

• Operating system Windows 98SE/2000/XP

• Internet connection

In order to use the Sweex Internet phone successfully, you must use suitable software such as Skype™. We do not need to emphasise that you
need to have an active Internet connection in order to successfully make calls with other users.

English version

5

Important! Prior to connecting the Sweex USB Internet Phone to the computer, you must first install the SkyWin
software provided.

The developments in the fields of hardware and software follow each other in rapid succession. We therefore advise you to ensure that the operating
system you use is up-to-date before you start the installation. This update is easy to carry out by starting up "Internet Explorer" and selecting the
option "Windows Update" in the "Extra" menu.

Installing the drivers

Insert the driver software CD-ROM provided in the CD-ROM or DVD player. The CD will start playing automatically and the Installation Screen will
appear on your screen.

Follow these instructions if the CD does not start playing automatically: Go to the Start Menu and select the option 'Run'. Type in X:\Setup, X being
the drive letter of the CD or DVD player. Click on Next to start the installation process.

By default, the software is installed in the folder C:\Program Files\SkyWin. We advise you to accept this folder and to continue with the installation
process. Click Next again.