Sweex GA300 Quick start guide

English version

GA300 Sweex Steering wheel force vibration USB

Introduction

• Do not expose the Steering Wheel Wireless to extreme temeratures. Do not place the device in direct sun light or close to
heating elements.

• Do not use the Steering Wheel Wireless in extremely dusty or moist environments.

• Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics.

• Never try to open the device yourself, this voids the warranty.

Installation

Place the Sweex CD-ROM in the computer The CD-ROM will start automatically and display a menu.

To install the drivers press “Drivers XP and Vista”. Follow the installation procedure and then connect the Steering Wheel to an
USB port. Windows will install the drivers for the device. When the green light is lit the Steering Wheel Wireless is connected
correctly.

Testing and configuration

If testing or configuration of the Steering Wheel is required, double click the icon on your desktop

or go to “Start” – “Control Panel” and double click on “Game Controllers”

4

English version

Click “Properties” to test or configure the Steering Wheel Wireless.

Vibration function (Rumble)

On the Steering Wheel there is a “Rumble” button to switch the vibration function on and off. This function only works when the
drivers are installed correctly.

Vibration test

The Analog button switches the analog mode on and off. When the light is lit the analog mode is on.
The paddles behind the steering wheel always have the same function as the gas and brake pedal.

5