English version
GA102 Sweex Gamepad Wireless Dual Shock USB+PS2
• Never expose the Gamepad to extreme temperatures. Do not place the device in direct sun light or close to heating elements.
• Do not use the Gamepad in extremely dusty or moist environments.
• Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics.
• Never try to open the device yourself, this voids the warranty.
Installation
Installation Playstation:
Connect the de Gamepad to the Playstation 2.
PC:
Place the Sweex CD-ROM in the computer The CD-ROM will start automatically and display a menu.
To install the drivers press “Drivers XP and Vista”. Follow the installation procedure and then connect the Gamepad to an USB
port.
Windows will install the drivers for the device.
Connecting wireless
Put the 3x AAA batteries in the gamepad Switch the switch on the gamepad to “ON”. Press the button on the station and then
press “Connect” on the gamepad. A wireless connection is established when the red light on the station is lit continuously.
Testing and configuration
If testing or configuration of the Gamepad is required go to “Start” – “Control Panel” and double click “Game Controllers”.
4
Press “Properties” to test and configure the Gamepad.
English version
Vibration function (Rumble)
On the Gamepad there is a “Rumble” button to switch the vibration function on and off. This function only works when the drivers
are installed correctly.
5
Loading...