SWEEX EA2500010 User Manual

English version

WWW.SWEEX.COM

2

EA2500010 Sweex Wireless Desktop Set

Introduction

Thank you for buying the Sweex Wireless Desktop Set. This is a complete desktop set with a wireless keyboard, wireless optical mouse and a
receiver. No more cables over and under your desk and no more problems with leads that are just that litle bit too short.

Multimedia keyboard with 22 multimedia keys. These keys give you fast access to the Internet, e-mail, your CD ROM controls and much more.

The wireless optical mouse has 400 CPI and is equipped with very sensitive sensor technology. The mouse also has three programmable buttons.
You can adjust the settings for left or right-hand use and the speed for double-clicking and scrolling.
For the correct operation of this product we advise you to first read this manual carefully. If after reading the manual you still encounter problems
with the installation or operation, you can find more information on our website at www.sweex.com.

Contents of package

Before installing the device, please check that all necessary parts are present. The box should contain the following parts:

• Wireless Multimedia Keyboard

• Wireless Optical Mouse

• Receiver

• CD ROM with drivers

• This manual

Should one of the above parts be missing, please contact your supplier.

Specifications

Receiver

• Carrier frequency: 27MHz

• Numbers of ID: 256

• Maximum transfer rate: 2.0 Kbps

• Auto power saving mode

Keyboard

• Maximum operating distance: 2.5 meters

• Power: 3 x AA battery

• Switch reliability: 5 million

• Dimension: 484 x 209 x 45 mm (lxwxh)

English version

3

Mouse

• Maximum operation distance: 1.5 meters

• 400 CPI, advanced optical sensing technology

• Power: 2 x AAA battery

• Plug and Play

System requirements

Pentium 233 or higher
Two PS/2 ports
CD-ROM driver (for driver and software installation)
Standard sound card (Optional for “you’ve got mail” software)
A POP 3 e-mail server
Windows 98SE, 2000 or XP

Warning!

• Do not use this keyboard near water or other fluids.

• If this keyboard is opened, you may come into contact with live parts. Therefore never try to repair this device yourself.

• If you want to clean the keyboard, only use a damp cloth and definitely no aerosols or cleaning products.

• Continuous use of a keyboard, irrespective of the brand, may lead to serious health complaints. For this reason we advise you to take regular

breaks, sit right in front of your keyboard and use the wrist support, if supplied. In case of doubt with regard to the most desirable work
position we advise you to contact your general practitioner.

Installation

Before starting with the installation we advise you to make sure the operating system you are using is up to date. This can be checked easily by
clicking on the "Tools" toolbar button and then selecting the "Windows Update" option in Windows Explorer.

Battery installation

Open the battery cap, which is on the reverse side of the keyboard or mouse, insert the alkaline batteries, and put the cap back. Every time after
having changed batteries, please re-setup the mouse or keyboard, or mouse and keyboard depending on which unit you have changed batteries.
For re-setup, please follow the setup of "SETUP FOR USE ".

English version

WWW.SWEEX.COM

4

Warning!

To conserve the battery power and extend battery usage time, hold the "ID Reset" button for 3 seconds until the optical sensor flashes. The
mouse is set to "Sleeping Mode". Press the "ID Reset" button again to reactivate the mouse.

Hardware installation

1. Shut down your computer system.

2. Connect the green connector of the receiver to the PS/2 connection port of the computer, or connect the purple connector of the receiver to
the PS/2 connection port.

3. Turn on your computer system.

Software installation (driver)

1. Insert the CD/Driver into the CD-ROM player.

2. The computer will enter the setup screen.

3. Select "Keyboard".

4. Click the "Office Keyboard" option under "Keyboard + Mouse 2 in 1".

5. Click on the appropriate item for setup.

6. Follow the setups indicated in the screen to complete the keyboard setup.

7. Restart your computer system.

8. Run the "AutoRun.exe" of the CD/Driver.

9. The computer will enter the setup screen.

10. Select " Keyboard ".

11. Click the "Mouse" option under " Keyboard + Mouse 2 in 1".

12. Select "3D 3Buttons".

13. Click on the appropriate item for setup.

14. Follow the setups indicated in the screen to complete the keyboard setup.

15. Restart your computer system.