SWEDX T0, T8, T9, X9, X0 User Manual

User’s Guide

T0/T8/T9

X0/X8/X9

www.swedx.com

Design and specifications are subject to change without notice.

Design and specifications are subject to change without notice.

2

Design and specifications are subject to change without notice.

3

INDEX

Introduction 4
Basic operation 5
Contents 6

7

OPTION
Channel

Menu > Picture

Warranty and Service

Control buttons 6

Remote control buttons
Basic Operation 8
Volume Control 8
OSD Menu Structure 8
OSD Menu Operation: 8

9

9
Menu > Channel > Auto Scan 9
Menu > Channel > ATV Manual Tuning 9
Menu > Channel > Program Edit 10

11
Menu > Picture > Picture Mode 11
Menu > Picture > Color Temperature 11
Menu > Picture > Aspect Ratio 11
Menu > Picture > Noise Reduction 11
Menu > Picture > Screen 11
Menu > Sound > Menu Sound 11
Menu > Sound > Sound Mode 11
Menu > Sound > Balance 11
Menu > Sound > Auto Volume 12
Menu > Sound > Surround Sound 12
Menu > Sound > SPDIF Mode 12
Menu > Sound > EQ 12
Menu > Time 12
Menu > Time > Clock 12
Menu > Time > Off Time 12
Menu > Time > On Time 12
Menu > Time > Sleep Timer 12
Menu > Time > Auto Sleep 12
USB Source 13
Remote Control Keys used in USB Mode 13
Text-TV / Teletext 14
USB Media Player 14
TV base assembly with the TV 15
Wall mount assembly with the TV 15
Connect External Speakers 15
Troubleshooting 16

17
Dead on Arrival (DOA) 17
How to get service 18
Limitation of liability 18

Connections on the rear of the LCD-TV 6

Introduction

Thank you for buying SWEDX LCD-TV. Please read this manual thoroughly before operating the
TV. Make sure the display was not damaged in transit. Should the TV be damaged, please
contact your dealer and do not install it. Check that you have all the accessories according to the
model.

Safety precaution

• Do not place the TV on unstable places, from which it may fell off.

• Do not expose the TV to extreme temperature and humid environment.

• Avoid subjecting the TV to direct sunlit and other heat sources.

• Do not put the TV into any liquid.

• Do not put anything inside the TV, or place water container on top of the TV.

• In thunder rainy days (especially with lightening), please plug out the power plug and antenna

plug.

• Do not step on the power cable, or tangle them together

• Avoid overload of the exterior electric outlet to prevent fire hazard of electric shock.

• Clean the TV with dry and soft cloth (without evaporative matter).

• lf your TV is broken, do not repair it by yourself, but contact the maintenance personnel.

• lf the remote control is left unused for a longtime, please take the batteries out and store them

in dry places.

• Avoid dropping the remote control.

• lf the LCD TV is installed for exhibition purpose, please do not place the overheated part on

the ground or carpet to prevent accident.

Please install the TV at proper position, such as wall or ceiling. Please install it under the
guidance of professional staff. (When used or exhibit, please do not place the TV horizontally or
vertically on the ground.)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1)this device may not cause harmful interference.
(2)this device must accept any interference received, including interference that may cause
undesired operation.

This equipment should avoid from water drops and things that fill with liquid, such as vases,
cannot be placed on this equipment.

This equipment is predeterminated to work constantly (unless adding switch on this equipment)
Please disconnect the power cord if this equipment will not be used for a long time.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen

image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen
when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders

displayed on the left, right and center of the screen caused by the difference of light emission
on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may

produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Design and specifications are subject to change without notice.

4

Basic operation

Preparation

• Put the TV on a stable surface.

• Do not fix the TV with others fixations than those provided or suggested by the manufacturer.

• If you have a wall mount, check that it is steady.

• Do not place any material on the TV.

• Do not block or cover the ventilation openings on the TV.

• The TV must be plugged with a tension source of 110-240 volts and 50-60 Hz.

• Power cord and cables must be properly routed and protected to prevent from stepping on

them.

• Keep the power cord away from any heat source. Possible fire hazard.
Heating sources and humidity

• Keep the TV dry and away from humidity.

• Keep the TV away from heat sources.
Cleaning and maintenance

• Unplug the TV before cleaning it. Do not use solvents or liquids to clean the TV.

• Only clean the TV with a soft and dry cloth.

• In case of troubleshooting, do not use spare parts other than those suggested by the

manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or
others incidents. Please contact a technical authorized by SWEDX brand.

Departure in holidays

• Unplug the LCD-TV during lightning storms or when unused for long periods of time.

• Use AC 100-240V 50-60 Hz power outlet for the TV power supply.

• lf the screen of TV is not on, please press the power button on the remote control or on the

TV.

• lf you want to shut off the TV temporary, please press the power button on the remote control

or on the TV.

• lf you want to shut off the TV completely, please switch off the power ON/OFF.

• In TV/AV state, the TV will enter idle state if there is no signal input within 3 minutes.

• ln PC state, the TV will enter idle state if there is no signal input within 2 minutes.

• The setting and tuning of picture and sound will be saved when the TV is shut off, which will

be working in the pre-shut off state when the TV is turn on again.

• lf PC signal source is used, please first set the resolution of the PC display card as the

following modes: (1024*768 60 Hz, 800*600 60 Hz, 640*480 60 Hz)

• lf there is line-by-line output of the signal used by the user, signal source with line-by-line

output is recommended.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK). REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL

Design and specifications are subject to change without notice.

5

Contents

Included items in SG-series:

2 x AAA Battery

Remote Control

Notice AC Cable

POWER

SOURCE

MUTE SLEEP

STILL INFO.

DUAL I-II

ARC

PSM SSM

PIP

P.INPUT

P.POSITION

P.SIZE

3

21

6

5

4

9

8

7

PRE/CH

PC

HDMI

S.SELECT

TV

MENU EXIT

PR+

VOL+

PR-

VOL-

ENTER

Scart

Component

TTX ON

MIX

SIZE HOLD

CANCEL INDEX TIME

REVEAL

RED GREEN YELLOW

BLUE

PIP PR+

PIP PR-

PG UP

PG DOWN

FAV

GUIDE

TV/RADIO

DTV SETUP

0

-/--

LCD

Notice! / Information

1. USB/FW USB Media Player / Firmware update

2. HDMI 1&2 HDMI 1&2 input

3.

4. VGA Audio

Component 1 Component 1
Component 2 Component 2

Composite video (AV 1)
Composite video (AV 2)

VGA PC (VGA) input

Audio-input of PC/VGA

input
input

input

AV 2 input

9. S-Video S-Video input

10. D.Audio Digital Audio output (Coaxial)

11. ATV Aerial input for analog channels

12. Sp. Out Speakers output

13. S-Video Power Input 110-240 V @ 50-60Hz

14. On/Off Main On/Off Switch

5.

6.

7. AV 1

8.

1. ON/OFF: Power switch ON/OFF

2. CH+/-: Zap the channels / Navigate the OSD menu

3. Vol+/-: Decrease and increase the audio volume / Navigate the OSD menu / Adjust

values in the OSD

4. Select/Menu: Activate the OSD menu / Select in the OSD menu or Sources

Activate the input source menu / Exit the OSD menu

6. LED: Power indicator

7. IR: Remote control Infra Red receiver

Connections on the rear of the LCD-TV

5. Source/Exit:

ON/OFF SELECT EXIT

MENU

SOURCE

VOL+VOL-CH+CH-

2 3

4

5

1

6,7

Control buttons:

The control buttons’s outlook on your SWEDX LCD-TV is the following:

2

3 5

9

11 13 141

ON/OFF SELECT EXIT

MENU

SOURCE

VOL+VOL-CH+CH-

6

HDMI 1 HDMI 2

VGA

D. Audio

VGA

Audio-in

FW/USB

ATV

Input

Power Input

On/Off Switch

AC - 100-240 V @ 50/60 Hz

S-Video

4 7

AV 1

AV 2

6

8

10

Component 1

Component 2

12

Sp. Out

Design and specifications are subject to change without notice.

Design and specifications are subject to change without notice.

POWER SOURCE

MUTE SLEEP STILL INFO.

DUAL I-II ARC PSM SSM

+

VOL

CH

321

65

4

987

PRE/CH

PC

HDMI

DTV

ATV

MENU EXIT

ENTER

Scart

Component

TTX ON MIX SIZE HOLD

CANCEL INDEX TIME REVEAL

RED GREEN YELLOW BLUE

S.SELECTPIP

POSITIONSIZE

AUDIO

SUB-T

TV/RD

FAV

LIST

EPG

0-/--

+

1

2
3
4
5

30
31
32
33

29

28

7
8

9

10

11
12
13

14
15

38
39

40

41

42

16

18
19

17

43

45
46

44

20
21

47
48

22
23
24

25
26
27

49
50

51
52

34

35

36

37

1. On/Off button

2. Turn Off/On TV

speakers

3. Enter sleep mode in

certain chosen time

4. Select audio mode

5. Picture size selection

6. Number buttons for

direct channel access

7. One/Two-digit channel

selection

8. Shortcut to HDMI1,2

inputs.

9. Shortcut to PC input

10. Menu display. In OSD

sub-menu press to
access previous menu

11. Navigation button UP

12. Confirm/activate

button

13. Navigation/adjust

button LEFT

14. Navigation button

DOWN

15. Shortcut to

Component

16. Activate Teletext

17. Alter Teletext mix

18. Teletext cancel

19. Teletext index

20. Fast-text topic

selection in Teletext

RED

21. Fast-text topic

selection in Teletext

GREEN

22. List TV-channels

23. N/A for this model

24. N/A for this model

25. N/A for this model

26. Display favorite

channels

27. Activate/alter subtitles

in USB movieplayer

28. Flash when a button

is pressed

29. Available sources

selection

6

Remote control buttons

30. Display information
about the current
source

31. Picture freeze

32. Alter sound mode

33. Alter picture mode

34. Volume increase

35. Volume decrease

36. Next channel. When
the channel list is
displayed, it scrolls
down to next page in
the list.

37. Previous channel.

38.

39. Shortcut to ATV

40. Exit the OSD

41.

42.

When the channel list
is displayed, it scrolls
up to previous page in
the list.
N/A for this model

Navigation/adjust
button RIGHT
N/A for this model

43. Hold Teletext

44. Teletext size selection

45. Reveal Teletext

46. Display time in
Teletext

47. Fast-text topic
selection in Teletext

Blue

48. Fast-text topic
selection in Teletext

Yellow

49. N/A for this model

50. N/A for this model

51. N/A for this model

52. N/A for this model

Buttons 20,21,47,48 are
used with the USB Media
Player.

7

Basic Operation

Turning LCD-TV On And Off
Press Power button on the remote control or the On/Off button on the
control buttons. The LCD will turn on and will be ready to be used.

Select Source
Press Source button on the remote control. Then you can see the
source list menu shown to the right. Press Navigation Up/down
button on the remote control to select the source and confirm by
pressing Enter.

Volume Control

Press VOL+ / VOL- button on the remote control to adjust the
volume level.
Press MUTE button on the remote control when you need to
mute the sound.

OSD Menu Structure

• OSD (On Screen Display) allows users to
control or adjust various features and
settings in accordance with his/her
preferences.

• Press the MENU button on the remote
control to see the main OSD menu.

Example of OSD Menu:

• Main Menu: Press the MENU button on
the remote control to enter the main OSD
menu.
First, select Main menu item you need
with the ? & ? .
To select a main menu items, just press Enter or Navigation button ▼ on the Remote Control.

• Sub Menu: Each menu item has its own sub menu items to set.

• Sub Menu items:
A: If there is no value to adjust it means there is a sub menu which you can access by pressing
Enter and modify the menu values.
Select sub-menu item with buttons on the remote control and press button to enter
the submenu or change the value.

buttons

▲ & ▼ Enter

B: If there is no ? part, the item has adjustable values. Use the ? & ? buttons to adjust the
values.
C: If the sub-menu item is grey colored, it means this item is not available in the particular
mode.

OSD Menu Operation

Press MENU button on the remote control to access the OSD Menu. Pressing the
same button again will move you backward in the OSD structure.
Press ENTER button to confirm/select.
Use LEFT & RIGHT buttons to navigate or change the parameters of the current
sub-menu.
Use UP & DOWN buttons to navigate in the OSD Menu.
Press EXIT button to exit the OSD Menu.

MENU

ENTER

EXIT

8

ATV
Av1
Av2

SVIDEO
Component 1
Component 2

VGA
HDMI1
HDMI2

USB

ATV

Menu

MENU

Exit

EXIT

Move

PICTURE

Move Menu

MENU

OK

OK

Exit

EXIT

Picture Mode
Contrast
Brightness
Color
Sharpness
Tint

Standard

50
50
50
50
50

Design and specifications are subject to change without notice.

Design and specifications are subject to change without notice.

CHANNEL

Menu

manually or
automatically.
Manage the TV channels such as deleting,
adding to favourites, skipping and locking.

Menu > Channel > Auto Scan

Choose Auto Scan to start searching for TV­Channels (analog). When you choose Auto
Scan TV will start searching for available
channels. When the TV has finished
searching it will store the available channels automatically.

Press Menu
Choose Channel Menu
Press Enter or Move down with the down arrow
Press Enter to start Auto Scanning

Menu > Channel > ATV Manual Tuning

Choose ATV Manual Tuning to start searching for TV-Channels
(analog) manually.

Press Menu
Choose Channel Menu
Press Enter or Move down with the down arrow
Choose ATV Manual Tuning
Choose which channel to save too
Choose Search to start manual search. When a TV channel is found, do a fine tuning if necessary
and thereafter press RED button to save the TV channel.

To access the stored channels press LIST button on the remote control.

In this you can search for TV-channels
manually or automatically.
Search for analog TV-channels

OPTION

Menu

Choose the OSD Menu

duration in time.
Blue Screen: Choose if the LCD will display a

blue background screen when no signal is
detected.

Restore Settings: This function will restore the TV to the original settings.

In this you can choose the setup
settings for your TV.

OSD Language: Choose the OSD language
OSD Duration:

9

OPTION

Move Menu

MENU

OK

OK

Exit

EXIT

OSD Language
OSD Duration
Blue Screen
Restore Default

English

30s

Off

CHANNEL

Move Menu

MENU

OK

OK

Exit

EXIT

Auto Scan
ATV Manual Tuning
Programme Edit

ATV Manual Tuning

System BG

Current CH 4

Search

Fine-Tune

Save

Exit

EXIT

Move

Storage To X

Frequency 100.00

Design and specifications are subject to change without notice.

Menu > Channel > Program Edit

In Program Edit Menu you can:
Delete a channel (use Red button)
Move a channel (press Yellow button, choose
new position, press Enter)
Skip a channel (use Blue button)
Rename a channel (press Green button, change
the channel name using the arrow buttons)
Add a channel to favorits list (use FAV button)

To access Program Edit Menu do the following

Press Menu. Choose Channel Menu
Press Enter or Move down with the down arrow
Choose Program Edit

10

CH.NAME

Delete

FAV

FAV

Select

0 C-05

SKIP

FAV TYPE

1 C-06
2 C-07
3 C-08
4 C-09
5 C-10

Move Skip Rename

Menu

MENU

OK

OK

ATV
ATV
ATV
ATV
ATV
ATV

Design and specifications are subject to change without notice.

Menu > Picture

Use the Picture menu to adjust the picture
settings to meet your requirements:

Picture mode

Choose between predefined settings:

Standard: Suitable for a normal room
Dynamic: Suitable for a bright room
Movie: Suitable for a dark room
User: In Personal mode you can adjust the

Contrast, Brightness, Colour, Sharpness and
Tint to meet your own requirements.

Menu > Picture >

Menu > Picture > Color Temperature

Choose between predefined settings (User,
Cool, Medium, Warm). In User mode you can
adjust the Colors Red, Green and Blue.

Menu > Picture > Aspect Ratio

Choose the desired Aspect Ratio. Available
options are Just Scan, 16:9; 4:3,, Zoom1,
Zoom2.

In PC Mode, only "16:9" and "4:3" mode can
be adjusted.

Menu > Picture > Noise Reduction

Choose to activate noise reduction. Available
options are On and Off.

If the broadcast signal received by your TV is weak, you can
activate the Noise Reduction feature to help reduce any static and
ghosting that may appear on the screen.

Menu > Picture > Screen (only in VGA)

When the TV is in PC-Mode additional settings are available for
PC-Setup.

Horizontal Pos.: Adjust the PC’s screen positioning horizontally
Vertical Pos.: Adjust the PC’s screen positioning vertically
Size: Adjust the screen sizeclock
Phae: Adjust the signal phase

Menu > Sound

Use the Sound menu to adjust the sound
settings to meet your requirements:

Menu > Sound > Sound Mode

Choose between predefined settings:

Standard: Suitable for normal programs
Movie: Suitable for movies
Sport: Suitable for sport programs
Music: Suitable for music program
User: In Personal mode you can adjust the

Treble and Bass to meet your own
requirements.

Menu > Sound > Balance

Adjust the sound output balance between left and right speaker.

11

PICTURE

Move Menu

MENU

OK

OK

Exit

EXIT

Picture Mode
Contrast
Brightness
Color
Sharpness
Tint

Standard

50
50
50
50
50

Screen

Horizontal Pos.
Vertical Pos.
Size
Phase

Menu

MENU

Exit

EXIT

Move

50
50
50
50

PICTURE

Move Menu

MENU

OK

OK

Exit

EXIT

Color Temperature
Red
Green
Blue
Aspect Ratio
Noise Reduction
Screen

User

50
50
50

Just Scan

On

SOUND

Move Menu

MENU

OK

OK

Exit

EXIT

Sound Mode
Treble
Bass
Balans
Auto Volume
Surround Sound

Standard

50
50

0

Off

SRS TruSurround

Design and specifications are subject to change without notice.

Menu > Sound > Auto Volume

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is
low.

Menu > Sound > Surround Sound

When ON it delivers a compelling, virtual
surround sound experience through any two­speaker playback system, including internal
television speakers. It is fully compatible with
all multichannel formats.

Menu > Sound > SPDIF Mode

Choose the output mode for the SPDIF
signal. Choose between Auto or PCM.

Menu > Sound > EQ

Choose the equalizers to do fine tuning for
the audio output.

Menu > Time

Use the Time menu to set the TV time and
adjust some other settings related to time
settings.

Menu > Time > Clock

Adjust the time of the TV.

Menu > Time > Off Time

Set a certain time to turn off the TV
automatically. The available time intervals are

Once, Everyday, Mon-Fri, Mon-Sat, Mon­Sun and Sunday.

Menu > Time > On Time
Set a certain time to turn on the TV automatically. The available time intervals are Once, Everyday,
Mon-Fri, Mon-Sat, Mon-Sun and Sunday.

Menu > Time > Sleep Timer
Set the TV to turn off after a certain time. The time intervals are 240, 180, 120, 90, 60, 30, 20 and
10 min.

Menu > Time > Auto Sleep

When set to ON the TV will turn off automatically if no input signal is detected otherwise the TV will
remain ON even if no input signal is detected.

12

100

75

50

25

0

50 50 50 50 50 50 50

120Hz 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz

Adjust Menu

MENU

Exit

EXIT

Move

TIME

Move Menu

MENU

OK

OK

Exit

EXIT

Clock
Off Time
On Time
Sleep Timer
Auto Sleep

01/Jan 00:00

Off
Off
Off
On

Design and specifications are subject to change without notice.

USB Source

This product is equipped with high end USB
Media Player. It is capable of playing music, and
movies (up to 1080p and with subtitle support),
and display photos or text documents.

To Enter USB mode

Press Source
Choose USB using the arrow keys
Press Enter

In USB mode you can choose between:
Photos: Enables you to display several formats
of photos and images

Music: Enables you to play several formats of music and audio files
Movie: Enables you to play several formats of movies and video files
Text: Enables you to display TXT files

Remote Control Keys used in USB Mode

The INFO button will display available
controllers where it is possible to i.e.
rotate an image. The controllers may vary

depending on the USB mode.

The CANCEL button will fast backward played file (FB <<). Press several times will
increase the speed.

The INDEX button will fast forward the played file (FF >>). Press several times will
increase the speed.

The RED button will act as PLAY key ( > ) and PAUSE ( II ). Press it to start playing the file.
Press it again to pause the playing.

The GREEN button will act as PREVIOUS key ( I<< ). Press it to jump back to the previous
title.

The YELLOW button will act as NEXT key ( >>I ). Press it to jump to the next title.

The BLUE button will act as STOP key. Press it to stop the playing and return to files
screen.

The AUDIO button will alter audio track (if several audio tracks are available in the played
file).

The SUB-T button will alter the subtitles or turn it off (if several subtitles languages are
available in the played file).

13

Disk C:

Move Menu

MENU

Play

OK

Exit

EXIT

MOVIE

Repeat A.. None Playlist Info. Slow Fo.. Step Fo.. Goto TL.

AB

INFO.

CANCEL

INDEX

RED

GREEN

YELLOW

BLUE

AUDIO

SUB-T

Design and specifications are subject to change without notice.

Text-TV / Teletext

Most television stations provide written information services
via Teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.

TTX ON: Press TTX ON to enter Text-TV
Press TTX ON to exit Text-TV

INDEX: Used to display the index (contents) page at any
time while youare viewing teletext.

SIZE: Press to display the double-size letters in the upper
half of thescreen. For lower half of the screen, press it again.
To display. normal screen, press it once again.

REVEAL: Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.

MIX: Press to activate teletext mode after selecting the channel providing the teletext service. Press
it twice to overlap the teletext with the current broadcasting screen.

HOLD: Used to hold the display on a given page if the selected page is linked with several
secondary pages which follow on automatically. To resume, press it again.

CANCEL: Used to display the broadcast when searching for a page.
Red/Green/Yellow/Blue: If the FASTTEXT system is used by a broadcasting company, the different

topics covered on a teletext page are color coded and can be selected by pressing the colored
buttons. Press one of them corresponding to the required. The page is displayed with other colored
information that can be selected in the same way. To display the previous or next page, press the
corresponding colored button.

TTX ON MIX SIZE HOLD

CANCEL INDEX TIME REVEAL

RED GREEN YELLOW BLUE

14

Design and specifications are subject to change without notice.

TV base assembly with the TV

The TV base for the camo TV can be purchased from
your dealer or www.swedx.com

To assemble the base with the TV review the
illustration to the right. Use the screws included in the
base box.

Notice: Make sure to avoid any damages to the

LCD panel when you assemble the TV base.

Screws

Wall mount assembly with the TV

SWEDX offers several wall mount devices for the
camo TV which can be purchased from your dealer or
www.swedx.com

To assemble the wall mount with the TV review the
illustrations to the right. Use the screws included in
the wall mount box.

Notice: Make sure to avoid any damages to the

LCD panel when you assemble the wall mount.

Lock
screw

15

Connect External Speakers

Connect the external speakers to the speakers output located
on the backside of the LCD-TV, See page 6.

ATV

Input

Power Input

12

Troubleshooting

Before contacting SWEDX service or your dealer, perform the following simple checks. If you
cannot solve the problem using the instructions below, note the model and serial number of your
set and contact your local dealer.

Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER button on the front of the TV.
Check the picture contrast and brightness settings.
Check the volume.

Check the volume.
Check whether the MUTE button has been pressed on the remote
control.

Adjust the color settings.
Check that the broadcast system selected is correct.

Try to identify the electrical appliance that is affecting the set and
move it further away.
Plug your set into a different mains socket.

Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.

Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Turn off the TV and unplug the AC cable from the wall socket and
then plug the AC cable and turn on the TV.

Check that the signal cable is firmly connected to the source input.
Check that the source is turned on.

Check the maximum resolution and the frequency of the video
adapter. For HD models the recommended resolution is 1366x768
and for Full HD models the recommended resolution is 1920x1080.

Adjust the Brightness and Contrast.

No sound or picture

Normal picture but no
sound

No picture or black and
white picture

Sound and picture
interference

Blurred or snowy
picture, distorted sound

Remote control
malfunctions

“No signal”
message is displayed.

On PC mode, “Not
Supported Mode”
message is displayed.

The image is too light
or too dark.

Pixel Mapping It is recommended to choose aspect ratio JUST SCAN to achieve

pixel mapping in VGA and HDMI modes.

Design and specifications are subject to change without notice.

16

Design and specifications are subject to change without notice.

Warranty and Service

The following terms apply only to new "in the original carton" SWEDX products marketed and
distributed by SWEDX, which are purchased and used by the original consumer purchaser.

Depending on the model, your terms and conditions may be different from those shown below,
and this information is subject to change without prior notice. Unless specifically stated otherwise,
used and reconditioned products that are resold have no warranty from SWEDX and are
considered sold "AS-IS", however, the selling dealer may offer additional service options.

Warranty for SWEDX products:

Check with your dealer for the warranty period.

What the warranty covers:

SWEDX warrants your SWEDX display(s) against defects in material and workmanship during
the warranty period from SWEDX factory delivery date shown in the shipping documents. If a
product proves to be defective in material or workmanship during the warranty period, SWEDX
will, at its sole option repair or replace the product with a similar product, provided the purchaser
adheres to certain return authorization procedures and guidelines. SWEDX reserves the right to
charge customer in case of warranty conditions not are fulfilled.

Who the warranty protects:
This warranty is valid only for the first purchaser.

What the warranty does not cover:

1. Any product which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from:

A. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.
B. Repair or attempted repair by anyone not authorized by SWEDX.
C. Any damage of the product due to shipment.
D. Removal or installation of the product.
E. Causes external to the product, such as electric power fluctuations or failure.
F. Use of supplies or parts not meeting SWEDX specifications.
G. Normal wear and tear.
H. Any other cause which does not relate to a product defect.

3. Cosmetic damage by purchaser, such as markings, discoloration, scratches, dents, anti-theft
devices markings, gouges or any other defacement.

4. Physically damaged products by purchaser, such as broken PCB, Housing, damaged LCD
Module.

5. No Defect Found (product returned to SWEDX as defective but failure is not duplicated by
SWEDX's test method.)

6. The product is not in accordance with the fault in the application

7. Timber is a lifelike natural material which can cause some little changes in the precision of the
produced product such as small openings line beside the connecting point and some other
small changes which are out of SWEDX control and don't make any effect for the product
functionality.

Dead on Arrival (DOA)

If the product fails within the manufacturer's DOA period, a replacement product will be offered.

Before contacting us:

In many cases, your TV may not need repair. Before you contact us, please consult the
troubleshooting section in your user's manual or SWEDX's FAQ web pages at
http://www.swedx.com to see if you can easily remedy the problem yourself.

17

How to get service:

For information on obtaining warranty service, contact SWEDX dealer (the place where you
bought your product) in first choice. If for any reason you can not contact your dealer, please
contact SWEDX Customer Service by visiting http://www.swedx.com.

SWEDX technical support services:

During the period of product warranty, we support your basic configuration, setup and
troubleshooting questions, and when required, we provide you with all instructions on how to
return your product for repair. For support inquiries, please visit http://www.swedx.com.

SWEDX reserves the right to make final decisions regarding problem determination and the
appropriate service option. Exchange units assume the remaining warranty of the original
product. Please refer to your SWEDX Limited Warranty Statement for complete terms and
conditions, as some models have other terms and conditions. Some limitations and restrictions
apply and these programs are subject to change without prior notice.

Limitation of liability

If your SWEDX product fails to work as warranted above, your sole and exclusive remedy shall
be repaired or replaced. SWEDX's maximum liability under this limited warranty is expressly
limited to the lesser of the price you have paid for the product or the cost of repairing or
replacement of any hardware components that malfunction in conditions of normal use. SWEDX
is not liable for any damages caused by the product or the failure of the product to perform,
including any lost profits or savings or special, incidental, or consequential damages. SWEDX is
not liable for any claim made by a third party or made by you for a third party.

This limitation of liability applies whether damages are sought, or a claim made, under this limited
warranty or as a tort claim (including negligence and strict product liability), a contract claim, or
any other claim. This limitation of liability cannot be waived or amended by any person. This
limitation of liability will be effective even if you have advised SWEDX.

Design and specifications are subject to change without notice.

18

Design and specifications are subject to change without notice.

19

www.swedx.com

SV88T8

SWEDX TV-Table