Swedstyle Space, Quadro, Classic, Aero, Delta Operating Manual
Operating manual
Electrical Sit & Stand desk
1. IMPORTANT SAFETY INSTRUCTIONS
2. MAXIMUM WIDESPREAD LOAD
3. PRODUCT LABEL
4. MAINTENANCE INFORMATION
5. GETTING STARTED
6. DECLARATION OF CONFORMITY
7. FAULT FINDING
Read the operating manual carefully before operating
the product and retain for reference purposes.
1 - column frame
2 - column frame
3 - column frame
Contact information regarding:
Manufacturer, retailer, phone number:
see product labels on the frame.
B006-02
Read all instructions before using
DANGER.
1. IMPORTANT SAFETY INSTRUCTIONS
This furnishing has been investigated and found suitable for public occupancies and household use.
When using an electrical furnishing, basic precautions should always be followed, including the following:
WARNING–To reduce the risk of burns, re, electricshock, or injury to
persons:
1. Always unplug this product from the electrical outlet before cleaning.
2. Unplug from outlet before putting on or taking off parts.
3. Close supervision is necessary when this product is used/operated by, or
near children, invalids or disabled persons.
4. Use this product only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
5. Never operate this product if it has a damaged cord or plug, if it is not working properly.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. To disconnect, remove plug from outlet.
WARNING:
No one should under no circumstances be underneath the table top whilst the
product is being operated(connected to power). If the product has to be serviced/repaired, the powercord must be disconnected from the power outlet before
anyone is allowed to be underneath the table top.
2. MAXIMUM WIDESPREAD LOAD
Note! The below gures are with the table top included.
1 Column frame 60Kg
2 Column frame 120Kg
3 Column frame 140Kg
Built in overload protection
This product has a built in overload protection. The reason for this is to prevent
mechanical parts from being damaged - if activated - the height of the frame is
adjusted 25mm in the opposite direction.
Built in temperature and duty cycle protection
Duty cycle, max: 1min / 9min
The built in protection can be initiated If used with higher frequency - wait a short
while and try again.
Manufactured by:
Swedstyle AB Vaggeryd, Sweden
Provided by: XXXXX
Model:XXXXXX
CE label with S/N
S/N: 123450-1 Manufactured:20XX
4. MAINTENANCE INFORMATION
Maintenance: The desk, with its integral electronic components is designed to be
completely maintenance free. There is no need for any intermittent lubrication,
adjustment or any subsequent maintenance for the lifetime of the desk. Interfering with the electronics, motor, transformer or frame will make the warranty
to become unvalid.
Caution!
Position electrical cords in such a way that they not can be damaged while the
product either is in use or not in use.
Cleaning
Cleaning of this product should only be carried out with means of a dry cloth.
3. PRODUCT LABEL
The product label Fig1 is located on the frame, see Fig2.
Fig1
Fig2
Loading...