Functions/Settings 80Navigator/Diaphane
Time setting
Set
Go
A Normal position of the crown
C Position for setting the time
To set the time, pull the crown out to position C and
turn clockwise or anticlockwise. After resetting has
been completed, press the crown back to position A.
Date
Set
Go
To set the date, pull the crown out to position B,and
turn anticlockwise. After resetting has been
completed, press the crown back to position A.
Display
A Minutes counter (60 minutes)
B Seconds counter
C
1
⁄10 second counter
D Push-button
E Crown
F Push-button
G Hours hand
H Seconds hand
I Minutes hand
Timing mode
Press…
1. The upper push-button to start the
chronograph.
2. Once again to read the elapsed time.
3. The lower push-button to reset.
81
Functions/Settings
Navigator/Diaphane
Add Functions
Start
Read
Restart
Read
Reset
Press…
1. The upper push-button to start.
2. Press the upper push-button to read the first
time.
3. Press the upper push-button to restart the
chronograph.
4. Press the upper push-button to read the
additional time (repeat these two steps as many
time as you wish).
5. Press the lower push-button to reset.
Split time
Go
Stop
Go
Stop
Reset
Press…
1. The upper push-button to start the
chronograph.
2. The lower push-button to read the
intermediary time.
3. Once again to continue (repeat the last two
actions as many times as you wish to read
the intermediary time while the chrono
carries on).
4. The upper push-button to stop finally.
5. The lower push-button to reset.
Functions/Settings 82Navigator/Diaphane
Tachometer
Go
Stop
Reset
Measure the speed Base 100 or 1000m.
Press…
1. The upper push-button when an action
starts.
2. Once again to stop after a distance of 100
or 1000 m. Read the speed indicated by
the 60 seconds counter on the tachometer
scale (km/h = kph).
3. The lower push-button to reset.
Readjustment
Adjusting the chronograph (ex: after battery change
or a hard shock)
1. Pull the crown to position B.
2. Press the upper button to reach the position
12 h 00 with the hand of the
1
⁄10 sec. counter.
3. Pull the lower button to reach the position
12 h 00 with the hand of the seconds.
4. Pull the crown to the position C.
5. Press the upper button to reach the position
12 h 00 with the hand of the minutes counter.
6. Press the crown to position A.
83
Functions/Settings
Navigator/Diaphane
turning bezel
Set
Read
Using the adjustment ring
For setting the start time and duration of an activity.
Line up the marker on the adjustment ring with the
minute hand. Timing starts at the time indicated by
the marker. The elapsed time is indicated by the
minute hand pointing the number on the
adjustement ring.
The previious text only applies to the
adjustment ring for the dive function. Please
refer to the enclosure for other functions such
as the internet navigator (or similar).
Internet Navigator Bezel
Swatch Internet Time is a universal time, all
over the world, without time zones or
geographic borders.
The current 24 hours are divided into 1000
Swatch beats. @000 Swatch Internet Time
represents midnight (CET-wintertime) in Biel,
Switzerland, the home of Swatch. If you live
outside of Central European Time (CETwintertime) refer to the «time zone map» and
turn the Navigator Bezel until your indicated
time zone number is at the 12 o’clock position.
Read the Swatch Internet Time on the bezel that
faces the hour hand. (If it is between two
numbers, read the lesser numbers).
Note the small numbers on the dial facing the
minute hand and add them to the numbers
facing the hour hand.
Loading...