
Single Threshold Shower Floors
SWANSTONE SHOWER FLOORS
With Fit-Flo™ Drain (continued)
Manufactured from Swanstone solid surface
(See page 2 for detailed information.)
FEATURES
• Reinforced solid surface means color and texture run
all the way through and cannot wear away.
• Will not mold or mildew, no grout to clean.
• Coordinates with Swanstone shower and bath systems.
• Pebbled, slip-resistant surface.
Recommended for high-use traffic areas and commercial surfaces.
Model A B C D
SS-3454 54" 34" 27" 17"
SS-3460 60" 34" 30" 17"
SS-3636 36" 36" 18" 18"
SS-4236 36" 42" 18" 20"
SS-4242 42" 42" 21" 21"
Nominal Rough-In Dimensions
Model Size A B C D
SS-3454 34" x 54" 54-3/8" 34-3/16" 27-3/16" 17-3/16"
SS-3460 34" x 60" 60-3/8" 34-3/16" 30-3/16" 17-3/16"
SS-3636 36" x 36" 36-3/8" 36-3/16" 18-3/16" 18-3/16"
SS-4236 42" x 36" 36-3/8" 42-3/16" 18-3/16" 20-3/16"
SS-4242 42" x 42" 42-3/8" 42-3/16" 21-3/16" 21-3/16"
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.
SPECIFICATIONS
Single Threshold Shower Floors With Fit-Flo™ Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
SS-3454 SF03454MD 34" D x 54" W (864 mm x 1372 mm) 55 – 60 x 40 x 10 14
SS-3460 SF03460MD 34" D x 60" W (864 mm x 1524 mm) 63 – 66 x 40 x 10 16
SS-3636 SF03636MD 36" D x 36" W (914 mm x 914 mm) 40 – 42 x 41 x 10 10
SS-4236 SF04236MD 42" D x 36" W (1067 mm x 914 mm) 44 – 47 x 42 x 10 12
SS-4242 SF04242MD 42" D x 42" W (1067 mm x 1067 mm) 53 – 48 x 48 x 10 14
Includes: One code-approved compression-molded Swanstone floor with
molded-in Fit-Flo drain and installation instructions.
Packaging: Each floor packed in a rectangular carton.
STANDARDS AND RATINGS
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet – page 175.
SUPPORT DOCUMENTS
Installation instructions available at swanstone.com.
WARRANTY
Limited Lifetime – Residential
Limited 10-year – Commercial
COLORS
(See inside back cover for color sample.)
Solid Colors:
• White (010)
• Bone (037)
• Bisque (018)
• Bright White (137)
• Pearl (138)
Aggregate Colors:
• Acorn (123)
• Almond Galaxy (046)
• Arctic Granite (035)
• Baby’s Breath (168)
• Barley (091)
• Bermuda Sand (040)
• Canyon (124)
• Caraway Seed (169)
• Cloud Bone (126)
• Cloud White (125)
• Cornflower (063)
• Glacier (121)
• Golden Steppe (128)
• Gray Granite (042)
• Ice (130)
• Indian Grass (071)
• Mountain Haze (129)
• Night Sky (012)
• Pebble (072)
• Prairie (122)
• Sierra (094)
• Tahiti Desert (050)
• Tahiti Gray (053)
• Tahiti Ivory (059)
• Tahiti Matrix (058)
• Tahiti Sand (051)
• Tahiti Terra (055)
• Tahiti White (011)
• Tundra (131)
• Winter Wheat (060)
MAINTENANCE AND
CLEANING INFORMATION
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metalscouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.
TUB AND SHOWER
Swan • St. Louis, MO 63101 • (800)325-7008 • swanstone.com 87