
SS-36NEO, SS-38NEO
Neo Angle Shower Floors
A
B
12"
A
3" dia.
B
12"
25"
167/8"
1
1
/4"
Double Threshold and Neo Angle
SS-36NEO, SS-38NEO
Neo Angle Shower Floors
A
B
12"
A
3" dia.
B
12"
SS-36NEO SS-38NEO
A: 36" 38"
B: 18" 20"
25"
167/8"
1
1
/4"
51/2"
4
1
/2"
6
/25"
2
3
/4"
7
/32"
2
1
/4"
4"
3
5
/8"
7
/32"
SWANSTONE SHOWER FLOORS
FEATURES
• Reinforced solid surface means
• Will not mold or mildew, no
• Coordinates with Swanstone
• Pebbled, slip-resistant surface.
Nominal Rough-In Dimensions
Model Size 36" 36" 18" 18"
SS-36DTF 36" x 36" 36-1/16" 36-1/16" 18-3/16" 18-3/16"
A B 25" 12"
SS-36NEO 36" x 36" 36-1/8" 18-3/16" 25-1/8" 12-3/16"
SS-38NEO 38" x 38" 38-1/8" 20-3/16" 25-1/8" 12-3/16"
SPECIFICATIONS
Double Threshold and Neo Angle Shower Floors With Fit-Flo™ Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
Double Threshold Shower Floor
SS-36DTF SD03636MD 36" D x 36" W DTF 44 – 42 x 41 x 10 10
(914 mm x 914 mm)
Neo Angle Shower Floors
SS-36NEO SN00036MD 36" D x 36" W 40 – 42 x 42 x 10 11
(914 mm x 914 mm)
SS-38NEO SN00038MD 38" D x 38" W 44 – 44 x 43 x 10 11
(965 mm x 965 mm)
Includes: One code-approved compression-molded Swanstone floor with
molded-in Fit-Flo drain and installation instructions.
Packaging: Each floor packed in a rectangular carton.
color and texture run all the way
through and cannot wear away.
grout to clean.
shower and bath systems.
With Fit-Flo™ Drain
Manufactured from Swanstone solid surface
(See page 2 for detailed information.)
Recommended for high-use traffic areas and commercial surfaces.
SS-36DTF
Double
Threshold
IMPORTANT: Rough-in
dimensions are
provided for reference
only. You must measure
the actual shower floor
and check local building
code requirements
before construction
of the stud wall.
Model A B
SS-36NEO 36" 18"
SS-38NEO 38" 20"
COLORS
(See inside back cover for color sample.)
Solid Colors:
• White (010)
• Bone (037)
• Bisque (018)
• Bright White (137)
• Pearl (138)
Aggregate Colors:
• Acorn (123)
• Almond Galaxy (046)
• Arctic Granite (035)
• Baby’s Breath (168)
• Barley (091)
• Bermuda Sand (040)
• Canyon (124)
• Caraway Seed (169)
• Cloud Bone (126)
• Cloud White (125)
• Cornflower (063)
• Glacier (121)
WARRANTY
Limited Lifetime – Residential
Limited 10-year – Commercial
• Golden Steppe (128)
• Gray Granite (042)
• Ice (130)
• Indian Grass (071)
• Mountain Haze (129)
• Night Sky (012)
• Pebble (072)
• Prairie (122)
• Sierra (094)
• Tahiti Desert (050)
• Tahiti Gray (053)
• Tahiti Ivory (059)
• Tahiti Matrix (058)
• Tahiti Sand (051)
• Tahiti Terra (055)
• Tahiti White (011)
• Tundra (131)
• Winter Wheat (060)
TUB AND SHOWER
STANDARDS AND RATINGS
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet – page 175.
SUPPORT DOCUMENTS
Installation instructions available at swanstone.com.
Swan • St. Louis, MO 63101 • (800)325-7008 • swanstone.com 89
MAINTENANCE AND
CLEANING INFORMATION
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metalscouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.